August 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Aug 1 04:31:14 CEST 2012
Ending: Fri Aug 31 23:37:48 CEST 2012
Messages: 3190

• [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver   Vikram Narayanan
  • [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver   Stephen Warren
• [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
• [U-Boot] early_malloc outline   Graeme Russ
  • [U-Boot] early_malloc outline   Tomas Hlavacek
    • [U-Boot] [PATCH V2 00/13] Basic Raspberyr Pi support   Stephen Warren
    • [U-Boot] [PATCH V2 02/13] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
    • [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board   Stephen Warren
    • [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board   Tom Rini
    • [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board   Tom Rini
    • [U-Boot] [PATCH V2 04/13] ARM: arm1176: enable instruction cache in arch_cpu_init()   Stephen Warren
    • [U-Boot] [PATCH V2 05/13] ARM: rpi_b: enable CONFIG_ARCH_CPU_INIT for icache   Stephen Warren
    • [U-Boot] [PATCH V2 06/13] ARM: rpi_b: define CONFIG_MACH_TYPE   Stephen Warren
    • [U-Boot] [PATCH V2 07/13] ARM: rpi_b: include config_cmd_default.h   Stephen Warren
    • [U-Boot] [PATCH V2 08/13] ARM: rpi_b: enable booting the Linux kernel   Stephen Warren
    • [U-Boot] [PATCH V2 09/13] ARM: rpi_b: drop RAM size to 128M   Stephen Warren
    • [U-Boot] [PATCH V2 10/13] ARM: rpi_b: move stack to top of RAM   Stephen Warren
    • [U-Boot] [PATCH V2 11/13] ARM: bcm2835: implement reset using watchdog   Stephen Warren
    • [U-Boot] [PATCH V2 12/13] gpio: bcm2835: Add GPIO driver   Stephen Warren
    • [U-Boot] [PATCH V2 13/13] rbpi: Add BCM2835 GPIO driver for raspberry pi   Stephen Warren
    • [U-Boot] [PATCH V2 00/13] Basic Raspberyr Pi support   Tom Rini
    • [U-Boot] [PATCH V2 01/13] README: fix references to config_cmd_default.h   Stephen Warren
• [U-Boot] [PATCH v3 0/2] Add GPIO driver for BCM2835 SoC   Stephen Warren
  • [U-Boot] sh4 sti7109 for mb442 motherboards   Андрей Борисович
• [U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs   Prabhakar Lad
• [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
  • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Stephen Warren
    • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Stephen Warren
      • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Stephen Warren
      • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
  • [U-Boot] [PATCH] lsxl: support power switch   Prafulla Wadaskar
• [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32   Andreas Bießmann
• [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
  • [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support   Bo Shen
    • [U-Boot] [PATCH 0/7 V3] EXYNOS5: Enable SPI support   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/7 V3] EXYNOS5: Add pinmux support for SPI   Rajeshwari Shinde
    • [U-Boot] [PATCH 2/7 V3] SPI: Add W25Q32 to Winbond SPI flash table   Rajeshwari Shinde
    • [U-Boot] [PATCH 2/7 V3] SPI: Add W25Q32 to Winbond SPI flash table   Mike Frysinger
    • [U-Boot] [PATCH 3/7 V3] EXYNOS: Add clock for SPI.   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/7 V3] EXYNOS5: Add base address for SPI.   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/7 V3] SPI: Add SPI Driver for EXYNOS.   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/7 V3] SPI: Add SPI Driver for EXYNOS.   Mike Frysinger
    • [U-Boot] [PATCH 6/7 V3] EXYNOS5: Enable SPI   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/7 V3] Enable SPI booting.   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/7 V3] Enable SPI booting.   Mike Frysinger
• [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
  • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
    • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
      • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCHv3] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
      • [U-Boot] [PATCH] Enable the EMAC clock in at91_macb_hw_init().   Markus Hubig
      • [U-Boot] [PATCH] Enable the EMAC clock in at91_macb_hw_init().   Andreas Bießmann
      • [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
      • [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
  • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
    • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
      • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
• [U-Boot] [U-Boot-DM] List of offending drivers   Andreas Bießmann
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Dirk Behme
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Liu Hui-R64343
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Dirk Behme
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Wolfgang Denk
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Dirk Behme
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Thomas Petazzoni
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Dirk Behme
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Thomas Petazzoni
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Fabio Estevam
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Dirk Behme
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux   Stefano Babic
• [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32   Andreas Bießmann
• [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
• [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode   Marek Vasut
  • [U-Boot] [PATCH] SPI: Remove superfluous semicolon   Marek Vasut
  • [U-Boot] [PATCH] SPI: Remove superfluous semicolon   Mike Frysinger
  • [U-Boot] [PATCH] SPI: Remove superfluous semicolon   Wolfgang Denk
  • [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform   Marek Vasut
  • [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform   Marek Vasut
  • [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform   Detlev Zundel
  • [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform   Stefano Babic
  • [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform   Marek Vasut
  • [U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform   Stefano Babic
  • [U-Boot] [PATCH V2] MX28: Add SchulerControl SC_SPS_1 platform   Marek Vasut
  • [U-Boot] [PATCH V2] MX28: Add SchulerControl SC_SPS_1 platform   Stefano Babic
  • [U-Boot] [PATCH V3] MX28: Add SchulerControl SC_SPS_1 platform   Marek Vasut
• [U-Boot] [V3 09/15] arm1176: Fixed No relocation.   Zhong Hongbo
  • [U-Boot] Problem with PCIexpress switch   Miguel Ángel Álvarez
    • [U-Boot] [PATCH] arm: Fixed the offset for the no relocation.   Zhong Hongbo
    • [U-Boot] [PATCH] arm: Fixed the offset for the no relocation.   Zhong Hongbo
    • [U-Boot] [V2] arm: Fixed the offset for the no relocation.   Zhong Hongbo
    • [U-Boot] [V2] arm: Fixed the offset for the no relocation.   Zhong Hongbo
• [U-Boot] early_malloc outline   Tomas Hlavacek
  • [U-Boot] early_malloc outline   Wolfgang Denk
    • [U-Boot] early_malloc outline   Tomas Hlavacek
      • [U-Boot] early_malloc outline   Wolfgang Denk
      • [U-Boot] early_malloc outline   Tomas Hlavacek
      • [U-Boot] early_malloc outline   Wolfgang Denk
      • [U-Boot] early_malloc outline   Graeme Russ
      • [U-Boot] early_malloc outline   Tomas Hlavacek
      • [U-Boot] early_malloc outline   Graeme Russ
      • [U-Boot] early_malloc outline   Wolfgang Denk
• [U-Boot] Merging the pogo_e02 and sheevaplug code   Karl O. Pinc
  • [U-Boot] Merging the pogo_e02 and sheevaplug code   Prafulla Wadaskar
    • [U-Boot] Merging the pogo_e02 and sheevaplug code   Karl O. Pinc
    • [U-Boot] Merging the pogo_e02 and sheevaplug code   Prafulla Wadaskar
    • [U-Boot] Merging the pogo_e02 and sheevaplug code   Karl O. Pinc
• [U-Boot] [PATCH v2] net: Make the netconsole buffer size configurable   Mike Frysinger
• [U-Boot] [PATCH v2] net: Make netconsole src and dest ports configurable   Mike Frysinger
• [U-Boot] [PATCH] net: Improve the speed of netconsole   Mike Frysinger
  • [U-Boot] [PATCH] net: Improve the speed of netconsole   Joe Hershberger
• [U-Boot] [PATCH v4 2/2] arm: work around assembler bug   Allen Martin
• [U-Boot] [PATCH 1/2] sf: stmicro: support JEDEC standard two-byte signature   Mike Frysinger
• [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts   Mike Frysinger
  • [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts   Stephan Linz
• [U-Boot] [U-BOOT]: Add support for numonyx spi flash.   Mike Frysinger
• [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
  • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
    • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
    • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH v2 0/9] enable thumb for tegra20   Allen Martin
      • [U-Boot] [PATCH v2 2/9] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc   Allen Martin
      • [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc   Stephen Warren
      • [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc   Allen Martin
      • [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc   V, Aneesh
      • [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc   Stephen Warren
      • [U-Boot] [PATCH v2 5/9] arm: use thumb compatible return in arm720t   Allen Martin
      • [U-Boot] [PATCH v2 6/9] arm: change arm720t to armv4t   Allen Martin
      • [U-Boot] [PATCH v2 7/9] arm720t: add linkage macro for relocate_code   Allen Martin
      • [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc   Allen Martin
      • [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc   V, Aneesh
      • [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc   Allen Martin
      • [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc   V, Aneesh
      • [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc   Allen Martin
      • [U-Boot] [PATCH v2 9/9] tegra20: enable thumb build   Allen Martin
      • [U-Boot] [PATCH v2 0/9] enable thumb for tegra20   Stephen Warren
      • [U-Boot] [PATCH v2 1/9] tools, config.mk: add binutils-version   Allen Martin
      • [U-Boot] [PATCH v2 3/9] tegra20: remove inline assembly for u32 cast   Allen Martin
      • [U-Boot] [PATCH] MAINTAINERS: fix entry of Ilko Iliev   Andreas Bießmann
      • [U-Boot] [PATCH] MAINTAINERS: fix entry of Ilko Iliev   Andreas Bießmann
      • [U-Boot] [PATCH] MAINTAINERS: fix Andreas Bießmann AVR32 entry   Andreas Bießmann
      • [U-Boot] [PATCH] MAINTAINERS: fix Andreas Bießmann AVR32 entry   Andreas Bießmann
      • [U-Boot] [PATCH 0/5] light updates of common pci code; some pci ids   Andrew Sharp
      • [U-Boot] [PATCH 1/5] pci: fix errant data types and corresponding access functions   Andrew Sharp
      • [U-Boot] [PATCH 2/5] [cosmetic] pci: clean up some whitespace and formatting   Andrew Sharp
      • [U-Boot] [PATCH 3/5] pci: minor cleanup of CONFIG_PCI_PNP usage   Andrew Sharp
      • [U-Boot] [PATCH 4/5] pci: update pci_ids.h with a few new entries   Andrew Sharp
      • [U-Boot] [PATCH 5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done   Andrew Sharp
      • [U-Boot] [PATCH 0/5] light updates of common pci code; some pci ids   Wolfgang Denk
      • [U-Boot] [PATCH] doc/git-mailrc: Update 'ti' alias   Tom Rini
• [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Mike Frysinger
  • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Allen Martin
    • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Graeme Russ
    • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Mike Frysinger
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Allen Martin
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Wolfgang Denk
• [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget.   Mike Frysinger
  • [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
• [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Mike Frysinger
  • [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
• [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation   Mike Frysinger
  • [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation   Lukasz Majewski
    • [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation   Mike Frysinger
      • [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation   Marek Vasut
      • [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation   Mike Frysinger
• [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation   Mike Frysinger
  • [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
    • [U-Boot] add more function in hello_world.c for standalone application   Kassey Lee
      • [U-Boot] add more function in hello_world.c for standalone application   Wolfgang Denk
      • [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support   Rajeshwari Shinde
      • [U-Boot] [PATCH 1/7 V4] EXYNOS5: Add pinmux support for SPI   Rajeshwari Shinde
      • [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table   Rajeshwari Shinde
      • [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table   Mike Frysinger
      • [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table   Mike Frysinger
      • [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table   Joonyoung Shim
      • [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table   Mike Frysinger
      • [U-Boot] [PATCH 3/7 V4] EXYNOS: Add clock for SPI.   Rajeshwari Shinde
      • [U-Boot] [PATCH 4/7 V4] EXYNOS5: Add base address for SPI.   Rajeshwari Shinde
      • [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.   Rajeshwari Shinde
      • [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.   Mike Frysinger
      • [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.   Joonyoung Shim
      • [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS.   Rajeshwari Birje
      • [U-Boot] [PATCH 6/7 V4] EXYNOS5: Enable SPI   Rajeshwari Shinde
      • [U-Boot] [PATCH 7/7] EXYNOS5: Enable SPI booting.   Rajeshwari Shinde
      • [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support   Rajeshwari Birje
• [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Michael Hornung
  • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Fabio Estevam
    • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Stefano Babic
      • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Michael Hornung
      • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Stefano Babic
• [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Gerlando Falauto
  • [U-Boot] [PATCH v2 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Gerlando Falauto
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Marek Vasut
  • [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Mike Frysinger
    • [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.   Daniel Gachet
    • [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.   Benoît Thébaudeau
    • [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.   Benoît Thébaudeau
    • [U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules.   Benoît Thébaudeau
    • [U-Boot] [PATCH] KARO TX25: Fix NAND Flash R/W cycle times   Benoît Thébaudeau
    • [U-Boot] [PATCH] KARO TX25: Fix NAND Flash R/W cycle times   Stefano Babic
• [U-Boot] Problem booting linux kernel due to garbled available machine support   Dallas Clement
  • [U-Boot] [PATCH] config: Always use GNU ld   Otavio Salvador
  • [U-Boot] [PATCH] config: Always use GNU ld   Mike Frysinger
  • [U-Boot] [PATCH] config: Always use GNU ld   Otavio Salvador
  • [U-Boot] [PATCH] config: Always use GNU ld   Otavio Salvador
  • [U-Boot] [PATCH] config: Always use GNU ld   Anatolij Gustschin
• [U-Boot] [PATCH] PPC temac phy probe unsigned int underflow fix.   hpeyerl
  • [U-Boot] [PATCH] image/FIT: Add ramdisk load, entry address and OS tag inclusion   jagan
  • [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.   Matt Sealey
    • [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.   Wolfgang Denk
    • [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.   Rob Herring
    • [U-Boot] [PATCH 02/17] am335x_evm: Update config for common usage   Tom Rini
      • [U-Boot] [PATCH v2 1/2] sf: stmicro: support JEDEC standard two-byte signature   Stephan Linz
      • [U-Boot] [PATCH v2 2/2] sf: stmicro: add support N25Q128 parts   Stephan Linz
      • [U-Boot] [PATCH v2 1/2] sf: stmicro: support JEDEC standard two-byte signature   Mike Frysinger
      • [U-Boot] [PATCH] input: key_matrix: fix header inclusion   Stephan Linz
      • [U-Boot] [PATCH] input: key_matrix: fix header inclusion   Simon Glass
      • [U-Boot] [PATCH] input: key_matrix: fix header inclusion   Michal Simek
    • [U-Boot] Board-specific commands unintentionally linked into SPL?   Tyler Olmstead
      • [U-Boot] Board-specific commands unintentionally linked into SPL?   Daniel Schwierzeck
      • [U-Boot] Board-specific commands unintentionally linked into SPL?   Tom Rini
      • [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs   Karl O. Pinc
      • [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs   Karl O. Pinc
      • [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs   Prafulla Wadaskar
      • [U-Boot] [PATCH] cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.   Karl O. Pinc
      • [U-Boot] [PATCH] cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.   Prafulla Wadaskar
      • [U-Boot] [PATCH] cosmetic: Reference nand monitor commands in U-Boot README   Karl O. Pinc
      • [U-Boot] [PATCH v2] README: Reference nand monitor commands in U-Boot README   Karl O. Pinc
      • [U-Boot] [PATCH v2] README: Reference nand monitor commands in U-Boot README   Wolfgang Denk
  • [U-Boot] [PATCH v2 4/4] mmc: dw-mmc: add dw-mmc's confiuration at Makefile   Minkyu Kang
  • [U-Boot] [PATCH v2 3/4] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Minkyu Kang
• [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs   Karl O. Pinc
  • [U-Boot] [PATCH V3 1/4] README: fix references to config_cmd_default.h   Stephen Warren
  • [U-Boot] [PATCH V3 2/4] ARM: arm1176: enable instruction cache in arch_cpu_init()   Stephen Warren
  • [U-Boot] [PATCH V3 3/4] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH V3 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH V3 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC   Tom Rini
  • [U-Boot] [PATCH v4 0/7] dfu:usb: DFU support via USB Download gadget   Lukasz Majewski
  • [U-Boot] [PATCH v4 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
  • [U-Boot] [PATCH v4 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
  • [U-Boot] [PATCH v4 3/7] dfu: DFU backend implementation   Lukasz Majewski
  • [U-Boot] [PATCH v4 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
  • [U-Boot] [PATCH v4 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
  • [U-Boot] [PATCH v4 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Lukasz Majewski
  • [U-Boot] [PATCH v4 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Lukasz Majewski
  • [U-Boot] cfi: Problem with Intel Strata 28F320 flash   Stefan Roese
    • [U-Boot] [PATCH] arm: rmobile: Change initializing ICCICR register   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] net: sh_eth: Add support R8A7740 of rmobile (arm core)   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] arm: rmobile: Add support TMU base timer function   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] arm: rmobile: kzm9g: Add CONFIG_GLOBAL_TIMER to board config file   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] arm: rmobile: Add support Renesas R8A7740   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] arm: rmobile: Add support PFC of Renesas R8A7740   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] arm: rmobile: Add supoprt for ATMARK-TECHNO Armadillo-800EVA board   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] serial: sh: Add support Renesas R8A7740   Nobuhiro Iwamatsu
• [U-Boot] Pull request - microblaze   Michal Simek
  • [U-Boot] [PATCH] spi: Fix merge conflicts - Makefile   Michal Simek
  • [U-Boot] [PATCH] spi: Fix merge conflicts - Makefile   Wolfgang Denk
  • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   Tom Rini
    • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   Mathieu Poirier
    • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   Tom Rini
  • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   Tom Rini
  • [U-Boot] [PATCH v2 1/4] DaVinci DA8xx: tidy up clock ID definition   Tom Rini
  • [U-Boot] [PATCH v2 2/4] DaVinci DA850: UART2 clock ID comes from ASYNC3   Tom Rini
  • [U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs   Tom Rini
  • [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support   Tom Rini
  • [U-Boot] [PATCH v3 0/8] CPSW switch plus SPL net support   Tom Rini
  • [U-Boot] [U-Boot-DM] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Tom Rini
    • [U-Boot] [U-Boot-DM] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Marek Vasut
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
    • [U-Boot] [PATCH] README: Add handy kermit primer   Karl O. Pinc
    • [U-Boot] [PATCH] README: Add handy kermit primer   Wolfgang Denk
    • [U-Boot] [PATCH v2] README: Add handy kermit primer   Karl O. Pinc
    • [U-Boot] [PATCH 1/2] ARM: tegra: remove redundant mkdirs from board Makefiles   Stephen Warren
    • [U-Boot] [PATCH 2/2] ARM: tegra: fix Ventana standalone build   Stephen Warren
    • [U-Boot] [PATCH 2/2] ARM: tegra: fix Ventana standalone build   Tom Warren
• [U-Boot] The way the list manages patch submission   Karl O. Pinc
  • [U-Boot] The way the list manages patch submission   Andy Sharp
    • [U-Boot] The way the list manages patch submission   Karl O. Pinc
    • [U-Boot] The way the list manages patch submission   Graeme Russ
    • [U-Boot] The way the list manages patch submission   Wolfgang Denk
    • [U-Boot] The way the list manages patch submission   Karl O. Pinc
    • [U-Boot] The way the list manages patch submission   Wolfgang Denk
    • [U-Boot] The way the list manages patch submission   Karl O. Pinc
    • [U-Boot] The way the list manages patch submission   Wolfgang Denk
    • [U-Boot] The way the list manages patch submission   Alexander Holler
    • [U-Boot] The way the list manages patch submission   Karl O. Pinc
    • [U-Boot] The way the list manages patch submission   Karl O. Pinc
    • [U-Boot] [PATCH v2] net: Improve the speed of netconsole   Joe Hershberger
    • [U-Boot] [PATCH v2] net: Improve the speed of netconsole   Stefano Babic
    • [U-Boot] [PATCH v2] net: Improve the speed of netconsole   Joe Hershberger
    • [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
    • [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board   Tom Rini
    • [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board   Linus Walleij
    • [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board   Tom Rini
• [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
    • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
• [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers   Benoît Thébaudeau
  • [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers   Benoît Thébaudeau
• [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux   Benoît Thébaudeau
  • [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux   Benoît Thébaudeau
• [U-Boot] [PATCH] rtc: imxdi: Initial support   Benoît Thébaudeau
• [U-Boot] [PATCH] md5: Export step-by-step API   Benoît Thébaudeau
  • [U-Boot] [PATCH] md5: Export step-by-step API   Benoît Thébaudeau
• [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Wolfgang Denk
      • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
    • [U-Boot] pull request for u-boot-tegra/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master   Allen Martin
      • [U-Boot] pull request for u-boot-tegra/master   Allen Martin
      • [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master   Allen Martin
      • [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH] integrator: break out common config   Linus Walleij
• [U-Boot] The way the list manages patch submission   Wolfgang Denk
  • [U-Boot] [PATCH v2] integrator: break out common config   Linus Walleij
  • [U-Boot] [PATCH v2] integrator: break out common config   Linus Walleij
  • [U-Boot] [PATCH v2] integrator: break out common config   Linus Walleij
  • [U-Boot] [PATCH v2] integrator: break out common config   Tom Rini
  • [U-Boot] [PATCH v2] integrator: break out common config   Linus Walleij
• [U-Boot] [PATCH] env_onenand: set ONENAND_MAX_ENV_SIZE to CONFIG_ENV_SIZE   David du Colombier
  • [U-Boot] [PATCH] env_onenand: set ONENAND_MAX_ENV_SIZE to CONFIG_ENV_SIZE   Lukasz Majewski
  • [PATCH 3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325   Jamie Lentin
  • [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Jamie Lentin
  • [U-Boot] [RFC PATCH 1/5] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Otavio Salvador
• [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix   Otavio Salvador
• [U-Boot] [RFC PATCH 4/5] mxs: Reowork SPL to use 'mxs' prefix for methods   Otavio Salvador
  • [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization   Otavio Salvador
• [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix   Marek Vasut
  • [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix   Otavio Salvador
    • [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix   Marek Vasut
      • [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix   Stefano Babic
• [U-Boot] [RFC PATCH 1/5] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Marek Vasut
• [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization   Marek Vasut
  • [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization   Otavio Salvador
  • [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization   Marek Vasut
  • [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization   Otavio Salvador
  • [U-Boot] [PATCH v3] MX28: Check if we are using a valid VBUS for power initialization   Marek Vasut
• [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization   Stefano Babic
• [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization   Stefano Babic
• [U-Boot] [PATCH] rtc: imxdi: Initial support   Stefano Babic
  • [U-Boot] [PATCH] rtc: imxdi: Initial support   Benoît Thébaudeau
• [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Stefano Babic
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Stefano Babic
• [U-Boot] [PATCH] mx28evk: Turn on caches   Stefano Babic
  • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27   Philippe Reynes
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change   Philippe Reynes
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change   Stefano Babic
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change   Philippe Reynes
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change   Stefano Babic
  • [U-Boot] [PATCH] MX5: mx53loco: do not overwrite the console   Stefano Babic
  • [U-Boot] [PATCH] MX5: mx53loco: do not overwrite the console   Fabio Estevam
  • [U-Boot] [PATCH] MX28: Move the u-boot.bd info CPUDIR/SOCDIR   Marek Vasut
  • [U-Boot] [PATCH] MX28: Move the u-boot.bd info CPUDIR/SOCDIR   Stefano Babic
  • [U-Boot] [PATCH] OMAP3: fix DRAM size for IGEP-based boards.   Enric Balletbo i Serra
  • [U-Boot] [PATCH] OMAP3: fix DRAM size for IGEP-based boards.   Javier Martinez Canillas
  • [U-Boot] [PATCH] OMAP3: fix DRAM size for IGEP-based boards.   Tom Rini
• [U-Boot] MX23/MX28 USB loader   Marek Vasut
  • [U-Boot] [PATCH 1/2] m28evk: Turn on caches   Fabio Estevam
  • [U-Boot] [PATCH 1/2] m28evk: Turn on caches   Marek Vasut
  • [U-Boot] [PATCH 1/2] m28evk: Turn on caches   Stefano Babic
  • [U-Boot] [PATCH 1/2] m28evk: Turn on caches   Marek Vasut
  • [U-Boot] [PATCH 1/2] m28evk: Turn on caches   Stefano Babic
  • [U-Boot] [PATCH 2/2] apx4devkit: Turn on caches   Fabio Estevam
  • [U-Boot] [PATCH 2/2] apx4devkit: Turn on caches   Veli-Pekka Peltola
  • [U-Boot] [PATCH 2/2] apx4devkit: Turn on caches   Stefano Babic
• [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320   Jamie Lentin
  • [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console   Fabio Estevam
  • [U-Boot] [PATCH 2/2] vision2: do not overwrite the console   Fabio Estevam
  • [U-Boot] [PATCH 2/2] vision2: do not overwrite the console   Stefano Babic
  • [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console   Stefano Babic
  • [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console   Fabio Estevam
  • [U-Boot] [PATCH 1/2] mx51evk: do not overwrite the console   Stefano Babic
  • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v2)   Philippe Reynes
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v2)   Philippe Reynes
  • [U-Boot] [PATCH v1 0/6] Rework for mxs SoC family support   Otavio Salvador
  • [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Otavio Salvador
  • [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Stefano Babic
  • [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Marek Vasut
  • [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Otavio Salvador
  • [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Otavio Salvador
  • [U-Boot] [PATCH v1 1/6] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Stefano Babic
  • [U-Boot] [PATCH v1 2/6] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
  • [U-Boot] [PATCH v1 3/6] mxs: prefix register structs with 'mxs' prefix   Otavio Salvador
  • [U-Boot] [PATCH v1 4/6] mxs: Reowork SPL to use 'mxs' prefix for methods   Otavio Salvador
  • [U-Boot] [PATCH v1 5/6] mxs: Clarify why we poweroff in case of brownout in 5v conflict   Otavio Salvador
  • [U-Boot] [PATCH v1 6/6] mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs   Otavio Salvador
  • [U-Boot] [PATCH v4 0/5] OMAP: SPL networking support   Ilya Yanok
  • [U-Boot] [PATCH v4 1/5] net/bootp: add VCI support for BOOTP also   Ilya Yanok
  • [U-Boot] [PATCH v4 1/5] net/bootp: add VCI support for BOOTP also   Ilya Yanok
  • [U-Boot] [PATCH v4 1/5] net/bootp: add VCI support for BOOTP also   Joe Hershberger
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Ilya Yanok
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Tom Rini
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Ilya Yanok
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Tom Rini
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Ilya Yanok
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Tom Rini
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Ilya Yanok
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Tom Rini
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Ilya Yanok
  • [U-Boot] [PATCH v4 2/5] spl: don't mark __u_boot_cmd* as undefined   Ilya Yanok
  • [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL   Ilya Yanok
  • [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL   Tom Rini
  • [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL   Ilya Yanok
  • [U-Boot] [PATCH v4 3/5] OMAP: spl: call timer_inti() from SPL   Tom Rini
  • [U-Boot] [PATCH] am33xx: Remove redundant timer config   Tom Rini
  • [U-Boot] [PATCH v4 4/5] OMAP: networking support for SPL   Ilya Yanok
  • [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL   Ilya Yanok
  • [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL   Joe Hershberger
  • [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL   Tom Rini
  • [U-Boot] [PATCH v4 5/5] am335x_evm: enable networking in SPL   Ilya Yanok
  • [U-Boot] [PATCH v2] arm: rmobile: Add support TMU base timer function   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2] arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 1/2] arm: rmobile: armadillo-800eva Remove board_eth_init   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/2] arm: rmobile: Add cpu_eth_init function   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH V4 1/4] README: fix references to config_cmd_default.h   Stephen Warren
  • [U-Boot] [PATCH V4 2/4] ARM: arm1176: enable instruction cache in arch_cpu_init()   Stephen Warren
  • [U-Boot] [PATCH V4 3/4] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH V4 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH V4 4/4] ARM: add Raspberry Pi model B board, using BCM2835 SoC   Tom Rini
  • [U-Boot] [PATCH V4 1/4] README: fix references to config_cmd_default.h   Tom Rini
• [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Michal Simek
  • [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Simon Glass
  • [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration   Michal Simek
  • [U-Boot] [PATCH v2 2/7] microblaze: board: Remove compilation warning   Michal Simek
  • [U-Boot] [PATCH v2 2/7] microblaze: board: Remove compilation warning   Stephan Linz
  • [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value   Michal Simek
  • [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value   Stephan Linz
  • [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value   Michal Simek
  • [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value   Stephan Linz
  • [U-Boot] [PATCH v2 4/7] microblaze: intc: Coding style cleanup   Michal Simek
  • [U-Boot] [PATCH v2 4/7] microblaze: intc: Coding style cleanup   Stephan Linz
  • [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization   Michal Simek
  • [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization   Stephan Linz
  • [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization   Michal Simek
  • [U-Boot] [PATCH v2 6/7] microblaze: Clean microblaze initialization   Michal Simek
  • [U-Boot] [PATCH v2 6/7] microblaze: Clean microblaze initialization   Stephan Linz
  • [U-Boot] [PATCH v2 7/7] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE   Michal Simek
  • [U-Boot] [PATCH v2 7/7] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE   Stephan Linz
  • [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration   Stephan Linz
  • [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration   Michal Simek
  • [U-Boot] [PATCH] block: systemace: Simplify base and width initialization   Michal Simek
  • [U-Boot] [PATCH] block: systemace: Simplify base and width initialization   Michal Simek
  • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
  • [U-Boot] [PATCH v4] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
• [U-Boot] [Pull request] u-boot-onenand   Lukasz Majewski
  • [U-Boot] [Pull request] u-boot-onenand   Wolfgang Denk
    • [U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards   Holger Brunck
    • [U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards   Heiko Schocher
    • [U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards   Wolfgang Denk
    • [U-Boot] [PATCH v5 0/7] dfu:usb: DFU support via USB Download gadget   Lukasz Majewski
    • [U-Boot] [PATCH v5 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
    • [U-Boot] [PATCH v5 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
    • [U-Boot] [PATCH v5 3/7] dfu: DFU backend implementation   Lukasz Majewski
    • [U-Boot] [PATCH v5 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
    • [U-Boot] [PATCH v5 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
    • [U-Boot] [PATCH v5 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Lukasz Majewski
    • [U-Boot] [PATCH v5 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Lukasz Majewski
    • [U-Boot] [PATCH v5 0/7] dfu:usb: DFU support via USB Download gadget   Marek Vasut
    • [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/4] EXYNOS5: Add GPIO unique pin numbering support   Rajeshwari Shinde
    • [U-Boot] [PATCH 2/4] S5P: GPIO: Add GPIO pin numbering to driver   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/4] EXYNOS5: Enable GPIO Numbering.   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/4] EXYNOS: Update pinmux to use gpio numbering   Rajeshwari Shinde
    • [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature   Rajeshwari Birje
    • [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature   Minkyu Kang
    • [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature   Simon Glass
    • [U-Boot] USB 3 (XHCI) support in U-BOOT   yehuda yitchak
• [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error   Bill
  • [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error   Fabio Estevam
    • [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error   Bill
      • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v2)   Philippe Reynes
      • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v3)   Philippe Reynes
      • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v2)   Stefano Babic
      • [U-Boot] [PATCH v5] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCH v6] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
      • [U-Boot] [PATCH v6] at91: Add support for taskit AT91SAM9G20 boards.   Andreas Bießmann
• [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr   Benoît Thébaudeau
  • [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr   Joe Hershberger
  • [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr   Mike Frysinger
  • [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr   Fabio Estevam
  • [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr   Rob Herring
  • [U-Boot] [QUESTION] "ethaddr" env. var. vs. dev->enetaddr   Benoît Thébaudeau
• [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode   Marek Vasut
  • [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode   Stefano Babic
    • [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode   Marek Vasut
      • [U-Boot] [PATCH 1/2] MX28: Drop the cp15 reconfiguration from SPL   Marek Vasut
      • [U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code   Marek Vasut
      • [U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code   Stefano Babic
      • [U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code   Stefano Babic
      • [U-Boot] [PATCH 1/2] MX28: Drop the cp15 reconfiguration from SPL   Stefano Babic
      • [U-Boot] [PATCH 1/2] MX28: Drop the cp15 reconfiguration from SPL   Stefano Babic
  • [U-Boot] Testing report for i.MX51 using Linaro/Ubuntu gcc 4.6.3 (from Precise repositories), libgcc, etc.   Michael Hope
    • [U-Boot] [PATCH 1/3] nds32: drop bi_enetaddr from global data   Mike Frysinger
    • [U-Boot] [PATCH 3/3] nds32: fix unused pmu_init warning   Mike Frysinger
    • [U-Boot] [PATCH 3/3] nds32: fix unused pmu_init warning   Macpaul Lin
    • [U-Boot] [PATCH 1/3] nds32: drop bi_enetaddr from global data   Macpaul Lin
    • [U-Boot] [PATCH 2/3] nds32: delete unused local variable   Mike Frysinger
    • [U-Boot] [PATCH 2/3] nds32: delete unused local variable   Macpaul Lin
    • [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc   Allen Martin
    • [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc   Allen Martin
    • [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc   Albert ARIBAUD
    • [U-Boot] [PATCH] mkconfig: fix failure on boards that don't define soc   Mike Frysinger
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Lucas Stach
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Stephen Warren
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Lucas Stach
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Allen Martin
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Lucas Stach
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Allen Martin
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Allen Martin
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Lucas Stach
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Allen Martin
    • [U-Boot] [PATCH] tegra20: add back USE_PRIVATE_LIBGCC   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] tegra: init MMC from common board init   Lucas Stach
    • [U-Boot] [PATCH 2/2] tegra: convert gpio_config_uart to weak symbol   Lucas Stach
    • [U-Boot] [PATCH 2/2] tegra: convert gpio_config_uart to weak symbol   Stephen Warren
    • [U-Boot] [PATCH 2/2] tegra: convert gpio_config_uart to weak symbol   Lucas Stach
    • [U-Boot] [PATCH 1/2] tegra: init MMC from common board init   Stephen Warren
    • [U-Boot] [PATCH 1/2] tegra: init MMC from common board init   Lucas Stach
• [U-Boot] [PATCH 1/6] powerpc/corenet_ds: Update README.srio-boot-corenet   Liu Gang
  • [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port   Bob Liu
  • [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port   Mike Frysinger
  • [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port   Bob Liu
  • [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port   Bob Liu
  • [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port   Mike Frysinger
  • [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port   Bob Liu
  • [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page   Bob Liu
  • [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page   Mike Frysinger
  • [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page   Bob Liu
  • [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page   Mike Frysinger
  • [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit   Bob Liu
  • [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit   Mike Frysinger
  • [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit   Bob Liu
  • [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit   Bob Liu
  • [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit   Mike Frysinger
  • [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit   Bob Liu
  • [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch   Bob Liu
  • [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch   Mike Frysinger
  • [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch   Bob Liu
  • [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch   Mike Frysinger
  • [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver   Bob Liu
  • [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver   Mike Frysinger
  • [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver   Bob Liu
  • [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x   Bob Liu
  • [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x   Mike Frysinger
  • [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x   Bob Liu
  • [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support   Bob Liu
  • [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support   Mike Frysinger
  • [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support   Bob Liu
  • [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command   Bob Liu
  • [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command   Mike Frysinger
  • [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command   Bob Liu
  • [U-Boot] [PATCH 11/16] Blackfin: Bf60x: support clock init   Bob Liu
  • [U-Boot] [PATCH 11/16] Blackfin: Bf60x: support clock init   Mike Frysinger
  • [U-Boot] [PATCH 12/16] Blackfin: Bf60x: initcode: set up uart baud properly   Bob Liu
  • [U-Boot] [PATCH 12/16] Blackfin: Bf60x: initcode: set up uart baud properly   Mike Frysinger
  • [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support   Bob Liu
  • [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support   Mike Frysinger
  • [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support   Bob Liu
  • [U-Boot] [PATCH 14/16] Blackfin: setup SMC if user desires it   Bob Liu
  • [U-Boot] [PATCH 15/16] Blackfin: Bf60x: add resume from hibernate   Bob Liu
  • [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license.   Bob Liu
  • [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license.   Mike Frysinger
  • [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license.   Bob Liu
  • [U-Boot] patman patches   Ilya Yanok
    • [U-Boot] patman patches   Stefano Babic
    • [U-Boot] patman patches   Ilya Yanok
    • [U-Boot] [PATCH 1/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL   Jassi Brar
    • [U-Boot] [PATCH 1/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL   R, Sricharan
    • [U-Boot] [PATCH 2/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALL   Jassi Brar
• [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode   Stefano Babic
  • [U-Boot] [PATCH 0/4] Some patman fixes   Ilya Yanok
  • [U-Boot] [PATCH 2/4] patman: don't pick changes while processing patches   Ilya Yanok
  • [U-Boot] [PATCH 3/4] patman: don't mess with changelog   Ilya Yanok
  • [U-Boot] [PATCH 4/4] patman: don't mess with signoffs   Ilya Yanok
  • [U-Boot] [PATCH 1/4] patman: fix end of changes detection   Ilya Yanok
  • [U-Boot] [PATCH] am335x_evm: enable SMSC PHY driver   Ilya Yanok
  • [U-Boot] [PATCH] am335x_evm: enable SMSC PHY driver   Tom Rini
• [U-Boot] kernel upgradation 2.6.23 to 2.6.35.13 with old U-boot 1.3.0 version   rajeshvangari vangari
  • [U-Boot] kernel upgradation 2.6.23 to 2.6.35.13 with old U-boot 1.3.0 version   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] serial: Support serial multi for Microblaze   Michal Simek
    • [U-Boot] [PATCH 1/2] serial: Support serial multi for Microblaze   Stephan Linz
    • [U-Boot] [PATCH 2/2] serial: uartlite: Init all uartlites for serial multi   Michal Simek
    • [U-Boot] [PATCH 2/2] serial: uartlite: Init all uartlites for serial multi   Stephan Linz
    • [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R   Michal Simek
    • [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R   Michal Simek
    • [U-Boot] [PATCH] arm:exynos: Enable data cache at exynos based processors.   Lukasz Majewski
    • [U-Boot] [PATCH] arm:exynos: Enable data cache at exynos based processors.   Minkyu Kang
  • [U-Boot] [RESEND PATCH v2] i.MX28: bug fixes in PMU configuration code   Stathis Voukelatos
    • [U-Boot] [RESEND PATCH v2] i.MX28: bug fixes in PMU configuration code   Marek Vasut
      • [U-Boot] [PATCH] arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board   Lukasz Majewski
      • [U-Boot] [PATCH] arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board   Minkyu Kang
      • [U-Boot] [PATCH] arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board   Lukasz Majewski
• [U-Boot] [RESEND PATCH v2] i.MX28: bug fixes in PMU configuration code   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
  • [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx   Stefano Babic
    • [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx   Albert ARIBAUD (U-Boot)
  • [U-Boot] pull request for u-boot-tegra/master   Tom Warren
    • [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2   Tom Rini
    • [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2   Wolfgang Denk
• [U-Boot] [PATCH] Save/restore global data pointer on API boundary   Leif Lindholm
  • [U-Boot] [PATCH] Save/restore global data pointer on API boundary   Wolfgang Denk
    • [U-Boot] [PATCH] Save/restore global data pointer on API boundary   Leif Lindholm
    • [U-Boot] Please pull u-boot-ti/master   Tom Rini
      • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD (U-Boot)
• [U-Boot] u-boot script question   Sridhar Addagada
  • [U-Boot] u-boot script question   Wolfgang Denk
    • [U-Boot] [PATCH] tegra20: usb: rework set_host_mode   Lucas Stach
    • [U-Boot] [PATCH] tegra20: usb: rework set_host_mode   Stephen Warren
    • [U-Boot] [PATCH] tegra20: usb: rework set_host_mode   Lucas Stach
    • [U-Boot] [PATCH] tegra20: usb: rework set_host_mode   Stephen Warren
• [U-Boot] [PATCH] disk/partition: Fix the depend for all the partitions file   Wolfgang Denk
  • [U-Boot] [PATCH] disk/partition: Fix the depend for all the partitions file   Zhong Hongbo
    • [U-Boot] [PATCH] spi: xilinx: Remove unused variable   Stephan Linz
    • [U-Boot] Please pull u-boot-atmel/master   Andreas Bießmann
    • [U-Boot] Please pull u-boot-atmel/master   Albert ARIBAUD (U-Boot)
    • [U-Boot] Please pull u-boot-atmel/master   Albert ARIBAUD (U-Boot)
  • [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
    • [U-Boot] Pull request: u-boot-sh/master   Wolfgang Denk
    • [U-Boot] Pull request: u-boot-sh/master   Wolfgang Denk
    • [U-Boot] uboot nor xip support   Amol Bhise
      • [U-Boot] uboot nor xip support   Graeme Russ
      • [U-Boot] uboot nor xip support   Amol Bhise
• [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
  • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Marek Vasut
    • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
      • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Marek Vasut
    • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
      • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Stephen Warren
      • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Marek Vasut
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Marek Vasut
      • [U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()   Marek Vasut
      • [U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()   Mike Frysinger
      • [U-Boot] [PATCH 2/3] COMMON: Use __stringify() instead of xstr()   Anatolij Gustschin
      • [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()   Marek Vasut
      • [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()   Mike Frysinger
      • [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()   Anatolij Gustschin
      • [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()   Anatolij Gustschin
      • [U-Boot] [PATCH 3/3] COMMON: Use __stringify() instead of MK_STR()   Marek Vasut
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Mike Frysinger
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Mike Frysinger
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Marek Vasut
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Mike Frysinger
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Anatolij Gustschin
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Wolfgang Denk
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Marek Vasut
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Anatolij Gustschin
      • [U-Boot] [PATCH 1/3] COMMON: Add __stringify() function   Marek Vasut
      • [U-Boot] [PATCH 1/3 V2] COMMON: Add __stringify() function   Marek Vasut
      • [U-Boot] [PATCH] PXA: Fix up the timer   Marek Vasut
      • [U-Boot] [PATCH] omap4 i2c: add support for i2c bus 4   Koen Kooi
      • [U-Boot] [PATCH] omap4 i2c: add support for i2c bus 4   R, Sricharan
      • [U-Boot] [PATCH 01/14] dm: Initial import of design documents   Marek Vasut
      • [U-Boot] [PATCH 02/14] dm: Add Driver cores design document   Marek Vasut
      • [U-Boot] [PATCH 04/14] dm: Add MMC subsystem analysis   Marek Vasut
      • [U-Boot] [PATCH 05/14] dm: Add networking subsystem analysis   Marek Vasut
      • [U-Boot] [PATCH 06/14] dm: Add SPI API transition document   Marek Vasut
      • [U-Boot] [PATCH 07/14] dm: Add block device document   Marek Vasut
      • [U-Boot] [PATCH 08/14] dm: Add POWER API transition document   Marek Vasut
      • [U-Boot] [PATCH 09/14] dm: Hwmon UDM subsystem analysis added.   Marek Vasut
      • [U-Boot] [PATCH 10/14] dm: Driver model analysis document for Watchdog subsystem has been added.   Marek Vasut
      • [U-Boot] [PATCH 11/14] dm: add PCI design document   Marek Vasut
      • [U-Boot] [PATCH 12/14] dm: Add pcmcia design document   Marek Vasut
      • [U-Boot] [PATCH 13/14] dm: RTC subsystem analysis added.   Marek Vasut
      • [U-Boot] [PATCH 14/14] dm: Add twserial device document   Marek Vasut
      • [U-Boot] [PATCH 01/14] dm: Initial import of design documents   Stephen Warren
      • [U-Boot] [PATCH 01/14] dm: Initial import of design documents   Marek Vasut
      • [U-Boot] [PATCH 01/14] dm: Initial import of design documents   Stephen Warren
      • [U-Boot] [PATCH 01/14] dm: Initial import of design documents   Marek Vasut
      • [U-Boot] [PATCH 03/14] dm: Add GPIO API transition document   Marek Vasut
• [U-Boot] [PATCH v2] rtc: imxdi: Initial support   Benoît Thébaudeau
  • [U-Boot] [PATCH v2] rtc: imxdi: Initial support   Stefano Babic
    • [U-Boot] [PATCH v3] rtc: imxdi: Initial support   Benoît Thébaudeau
      • [U-Boot] [PATCH v3] rtc: imxdi: Initial support   Stefano Babic
    • [U-Boot] [PATCH v2] rtc: imxdi: Initial support   Benoît Thébaudeau
      • [U-Boot] [PATCH v2] rtc: imxdi: Initial support   Stefano Babic
      • [U-Boot] [PATCH] mx6qsabrelite: enable DCache and MMC bounce buffer   Dirk Behme
      • [U-Boot] [PATCH] mx6qsabrelite: enable DCache and MMC bounce buffer   Stefano Babic
      • [U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs   Holger Brunck
      • [U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs   Stefan Roese
      • [U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs   Holger Brunck
      • [U-Boot] [PATCH v2] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs   Holger Brunck
      • [U-Boot] [PATCH v2] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs   Stefan Roese
      • [U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem   Lukasz Majewski
      • [U-Boot] [PATCH 2/2] video:trats:logo: Make tizen_hd_logo cache line aligned.   Lukasz Majewski
      • [U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem   Mike Frysinger
      • [U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem   Lukasz Majewski
    • [U-Boot] Regarding BDI2000 connection problem with MPC8280 based board   Thirumalesha N
      • [U-Boot] Regarding BDI2000 connection problem with MPC8280 based board   Wolfgang Denk
      • [U-Boot] [PATCH] rtc: add support of mx27 rtc   Philippe Reynes
      • [U-Boot] [PATCH] rtc: add support of mx27 rtc   stefano babic
      • [U-Boot] [PATCH] rtc: add support of mx27 rtc   Stefano Babic
      • [U-Boot] [PATCH] tegra20: add assembly wrapper for lowlevel_init()   Allen Martin
      • [U-Boot] [PATCH] tegra20: add assembly wrapper for lowlevel_init()   Wolfgang Denk
      • [U-Boot] [PATCH] tegra20: add assembly wrapper for lowlevel_init()   Tom Rini
• [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional   Andy Fleming
  • [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional   York Sun
    • [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional   Andy Fleming
    • [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional   Wolfgang Denk
• [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.   Andy Fleming
  • [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.   Xie Shaohui-B21989
  • [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux   Ilya Yanok
  • [U-Boot] [RFC PATCH 1/5] linux/usb/ch9.h: update with the version from Linux tree   Ilya Yanok
  • [U-Boot] [RFC PATCH 2/5] musb-new: port of Linux musb gadget driver   Ilya Yanok
  • [U-Boot] [RFC PATCH 3/5] musb-new: dsps backend driver   Ilya Yanok
  • [U-Boot] [RFC PATCH 4/5] am33xx: init OTG hardware and new musb gadget driver   Ilya Yanok
  • [U-Boot] [RFC PATCH 5/5] am335x_evm: enable musb gadget on port 0   Ilya Yanok
  • [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux   Marek Vasut
  • [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux   Wolfgang Denk
  • [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux   Ilya Yanok
  • [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux   Ilya Yanok
  • [U-Boot] [RFC PATCH 0/5] Port of MUSB gadget driver from Linux   Ilya Yanok
• [U-Boot] Using u-boot to update the kernel and root-file system on NAND chip on imx28evk from USB memory stick   Bill
  • [U-Boot] Using u-boot to update the kernel and root-file system on NAND chip on imx28evk from USB memory stick   Scott Wood
    • [U-Boot] Using u-boot to update the kernel and root-file system on NAND chip on imx28evk from USB memory stick   Otavio Salvador
    • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: Enable workaround for erratum CPU_A011 for P3041   Andy Fleming
  • [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target   Andy Fleming
    • [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target   Liu Gang
      • [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target   Liu Gang
      • [U-Boot] [PATCH] MAKEALL: Allow empty ERR directory   Andy Fleming
      • [U-Boot] [PATCH] MAKEALL: Allow empty ERR directory   Tom Rini
      • [U-Boot] [PATCH] MAKEALL: Allow empty ERR directory   Wolfgang Denk
      • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
      • [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] powerpc/p1022ds: add support for SPI and SD boot   Andy Fleming
• [U-Boot] [PATCH] powerpc/p1022ds: fix DIU/LBC switching with NAND enabled   Andy Fleming
  • [U-Boot] [PATCH] powerpc/85xx: improve definition of BR_PHYS_ADDR macro   Andy Fleming
  • [U-Boot] [PATCH] powerpc/85xx: remove support for the Freescale P3060   Andy Fleming
    • [U-Boot] [PATCH] powerpc/sgmii: To support PHY link state auto detect in SGMII mode   Andy Fleming
  • [U-Boot] [PATCH] powerpc/corenet: fix compile error when CONFIG_SYS_NO_FLASH is defined   Andy Fleming
• [U-Boot] [PATCH] powerpc/ddr: fix fsl_ddr_get_dimm_params compile error   Andy Fleming
  • [U-Boot] [PATCH] powerpc/p2041: configure the CPLD lane_mux according to RCW   Andy Fleming
• [U-Boot] Early malloc() summary   Graeme Russ
  • [U-Boot] Early malloc() summary   Wolfgang Denk
    • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Tomas Hlavacek
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Albert ARIBAUD
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Tomas Hlavacek
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Marek Vasut
      • [U-Boot] Early malloc() summary   Graeme Russ
      • [U-Boot] Early malloc() summary   Tomas Hlavacek
      • [U-Boot] Early malloc() summary   Graeme Russ
• [U-Boot] [PATCH 1/2] nand/fsl_elbc: shrink SPL a bit by converting out_be32() to __raw_writel()   Scott Wood
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL   Scott Wood
    • [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL   McClintock Matthew-B29882
    • [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL   McClintock Matthew-B29882
    • [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL   Scott Wood
    • [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL   Huang Changming-R66093
    • [U-Boot] [PATCH 2/2] powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL   Scott Wood
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Troy Kisky
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Stefano Babic
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Troy Kisky
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Eric Nelson
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   stefano babic
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Troy Kisky
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Troy Kisky
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Eric Nelson
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Stefano Babic
    • [U-Boot] [PATCH V3 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   stefano babic
    • [U-Boot] [PATCH V3 2/3] mx6qsabrelite: add resetmode support   Troy Kisky
    • [U-Boot] [PATCH V3 3/3] mx53evk: add resetmode support   Troy Kisky
    • [U-Boot] [PATCH] spl: remove forced linking of commands into SPL   Tyler Olmstead
    • [U-Boot] [PATCH] spl: remove forced linking of commands into SPL   Tom Rini
    • [U-Boot] [PATCH] spl: remove forced linking of commands into SPL   Tyler Olmstead
    • [U-Boot] [PATCH] spl: remove forced linking of commands into SPL   Tom Rini
    • [U-Boot] [PATCH] spl: remove forced linking of commands into SPL   Tom Rini
    • [U-Boot] [PATCH] spl: remove forced linking of commands into SPL   Tyler Olmstead
• [U-Boot] [PATCH v3]: video: support exynos fimd driver for various exynos series   Minkyu Kang
• [U-Boot] [PATCH 2/2] tegra20: Initialize multiple USB controllers at once   Jim Lin
• [U-Boot] [PATCH v2 1/2] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
  • [U-Boot] [PATCH v2] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional   York Sun
  • [U-Boot] Fcall to lib_ppc/board.c/trap_init() results in Machine Check Exception   Vic
  • [U-Boot] Porting u-boot for MPC8280 based Board by taking MPC8260ads reference, Its hanging at some point   Thirumalesha N
    • [U-Boot] Porting u-boot for MPC8280 based Board by taking MPC8260ads reference, Its hanging at some point   Wolfgang Denk
      • [U-Boot] Porting u-boot for MPC8280 based Board by taking MPC8260ads reference, Its hanging at some point   Markus Hubig
      • [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection   Anatolij Gustschin
      • [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection   Stefan Roese
      • [U-Boot] [PATCH 1/4] rmobile: armadillo-800eva: Change init function of SCIFA1   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH 2/4] rmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDT   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH 3/4] rmobile: armadillo-800eva: Add Support NFS and BOOTZ command   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH 4/4] rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE   Nobuhiro Iwamatsu
• [U-Boot] Pull request v2 : u-boot-sh/master   Nobuhiro Iwamatsu
  • [U-Boot] Pull request v2 : u-boot-sh/master   Wolfgang Denk
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Lukasz Majewski
  • [U-Boot] [PATCH V3 0/4] common/lcd cleanup   Nikita Kiryanov
  • [U-Boot] [PATCH V3 0/4] common/lcd cleanup   Nikita Kiryanov
  • [U-Boot] [PATCH V3 0/4] common/lcd cleanup   Nikita Kiryanov
  • [U-Boot] [PATCH V3 1/4] common lcd: simplify lcd_logo   Nikita Kiryanov
  • [U-Boot] [PATCH V3 2/4] common lcd: simplify lcd_display   Nikita Kiryanov
  • [U-Boot] [PATCH V3 3/4] common lcd: simplify core functions   Nikita Kiryanov
  • [U-Boot] [PATCH V3 4/4] common lcd: simplify lcd_display_bitmap   Nikita Kiryanov
  • [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support   Josh Wu
  • [U-Boot] [PATCH 1/3] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().   Josh Wu
  • [U-Boot] [PATCH 2/3] at91: atmel_nand: remove unused variables.   Josh Wu
  • [U-Boot] [PATCH 3/3] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
  • [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support   Josh Wu
  • [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support   Andreas Bießmann
  • [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support   Josh Wu
  • [U-Boot] [PATCH 0/3] at91: atmel_nand: add PMECC(Programmable Multibit ECC controller) support   Andreas Bießmann
  • [U-Boot] [PATCH] arm/km: remove unused code   Holger Brunck
  • [U-Boot] [PATCH] arm/km: remove unused code   Prafulla Wadaskar
  • [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names   Holger Brunck
  • [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names   Holger Brunck
• [U-Boot] [PATCH 0/4] arm:samsung: Cleanup code for trats and universal boards   Piotr Wilczek
  • [U-Boot] [PATCH 0/4] arm:samsung: Cleanup code for trats and universal boards   Minkyu Kang
• [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized   Yann Vernier
• [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash   Yann Vernier
• [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed   Yann Vernier
• [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1   Yann Vernier
• [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch   Yann Vernier
• [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM   Yann Vernier
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Yann Vernier
• [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation   Yann Vernier
• [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support   Yann Vernier
• [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Yann Vernier
• [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values   Yann Vernier
• [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART   Yann Vernier
  • [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code   Otavio Salvador
  • [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code   Stefano Babic
  • [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code   Marek Vasut
  • [U-Boot] [PATCH] sc_sps_1: Adjust board config to use 'mxs' SoC code   Stefano Babic
  • [PATCH] cache:L2: Provide *_cache_{enable|disable} function calls   Lukasz Majewski
    • [U-Boot] [PATCH 1/2] doc/git-mailrc: Add 'rmobile' alias   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 1/2] doc/git-mailrc: Add 'rmobile' alias   Mike Frysinger
    • [U-Boot] [PATCH 2/2] rmobile: Add README   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/2] rmobile: Add README   Tom Rini
    • [U-Boot] [PATCH 2/2] rmobile: Add README   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/2] rmobile: Add README   Tom Rini
    • [U-Boot] [PATCH 2/2] rmobile: Add README   Nobuhiro Iwamatsu
• [U-Boot] Question about getting the length of u-boot binary.   shawn xy Bai
  • [U-Boot] Question about getting the length of u-boot binary.   Karl O. Pinc
• [U-Boot] Write ENV to File and flash it with openocd (problem) !!!   Franz Skale
  • [U-Boot] [PATCH 1/6 v2] powerpc/corenet_ds: Update README.srio-boot-corenet   Liu Gang
  • [U-Boot] [PATCH 2/6 v2] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target   Liu Gang
  • [U-Boot] [PATCH 3/6 v2] powerpc/corenet_ds: Get rid of the CONFIG_SRIOBOOT_SLAVE_PORTx macro   Liu Gang
  • [U-Boot] [PATCH 4/6 v2] powerpc/corenet_ds: Update README and README.srio-pcie-boot-corenet   Liu Gang
  • [U-Boot] [PATCH 5/6 v2] powerpc/corenet_ds: Master module for boot from PCIE   Liu Gang
  • [U-Boot] [PATCH 6/6 v2] powerpc/corenet_ds: Slave module for boot from PCIE   Liu Gang
  • [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7   Tom Rini
  • [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms   Tom Rini
  • [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms   R, Sricharan
  • [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms   Tom Rini
  • [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms   Allen Martin
  • [U-Boot] [PATCH 2/2] armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible stack   Tom Rini
  • [U-Boot] [PATCH 2/2] armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible stack   Allen Martin
  • [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7   Stefano Babic
  • [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7   Tom Rini
  • [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7   Allen Martin
  • [U-Boot] [PATCH 1/5] am335x evm: Initial support for AM335x GP EVM Profiles   Tom Rini
  • [U-Boot] [PATCH 3/5] am335x evm: Enable MMC1 pinmux   Tom Rini
  • [U-Boot] [PATCH 4/5] am33xx: Add support, update omap3 McSPI driver   Tom Rini
  • [U-Boot] [PATCH 2/5] am33xx: Correct MMC1, remove MMC2 support   Tom Rini
  • [U-Boot] [PATCH 5/5] am335x evm: Enable support for spi0   Tom Rini
• [U-Boot] [PATCH v2 3/5] sh: Add support pin function control using GPIO   Wolfgang Denk
  • [U-Boot] [PATCH v2 3/5] sh: Add support pin function control using GPIO   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile   Wolfgang Denk
  • [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/5] arm: rmobile: Add support Renesas SH73A0   Wolfgang Denk
  • [U-Boot] [PATCH 2/5] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3] global_data: unify global flag defines   Wolfgang Denk
• [U-Boot] [PATCH 1/8] EXT2: Indent cleanup of dev.c   Wolfgang Denk
• [U-Boot] [PATCH 2/8] EXT2: Indent cleanup ext2fs.c   Wolfgang Denk
• [U-Boot] [PATCH] Malloc: Fix -Wundef warnings   Wolfgang Denk
• [U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands   Wolfgang Denk
• [U-Boot] [PATCH v3 2/4] Allow newlines within command environment vars   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] sandbox: Add basic test for command execution   Wolfgang Denk
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Wolfgang Denk
• [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Wolfgang Denk
  • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Gerlando Falauto
    • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Wolfgang Denk
      • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Holger Brunck
      • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Wolfgang Denk
      • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Holger Brunck
      • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Wolfgang Denk
      • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Gerlando Falauto
      • [U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default   Marek Vasut
• [U-Boot] [PATCH] powerpc:Fix return type & parameter passed for I/O functions   Wolfgang Denk
• [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Wolfgang Denk
• [U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file   Timo Ketola
• [U-Boot] [PATCH] configs: Remove unused symbol CONFIG_DISCOVER_PHY   Wolfgang Denk
• [U-Boot] [PATCH] Add doc/README.kbd   Wolfgang Denk
• [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions   Marek Vasut
  • [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions   nerwusek
    • [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions   Marek Vasut
• [U-Boot] [PATCH 2/5] drivers/usb/gadget/Makefile: Add UDC ACM and Ether   Marek Vasut
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Wolfgang Denk
  • [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Albert ARIBAUD
    • [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Albert ARIBAUD
    • [U-Boot] [PATCH] fix IDE_BUS(dev) macro   DrEagle
• [U-Boot] [PATCH] mkconfig: add support for SPL CPU   Wolfgang Denk
  • [U-Boot] [PATCH] mkconfig: add support for SPL CPU   Allen Martin
• [U-Boot] Sandbox: auto exiting on pipe closure   Wolfgang Denk
  • [U-Boot] Sandbox: auto exiting on pipe closure   Mike Frysinger
• [U-Boot] [PATCH 3/5] pxa255: Add USB CDC ACM driver   Marek Vasut
• [U-Boot] [PATCH v2] Consider CONFIG_ZERO_BOOTDELAY_CHECK when CONFIG_AUTOBOOT_KEYED is set   Wolfgang Denk
  • [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller   Sughosh Ganu
  • [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller   Sughosh Ganu
  • [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller   Tom Rini
  • [U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller   Tom Rini
• [U-Boot] [PATCH v2 09/11] New command clear: Clear the ANSI terminal   Wolfgang Denk
• [U-Boot] [PATCH] disk: generate GUID Partiton Tables   Wolfgang Denk
  • [U-Boot] [PATCH] disk: generate GUID Partiton Tables   Kyungmin Park
• [U-Boot] [PATCH] rename EB+MCF-EV123 to its current marketing name EB+CPU5282   Wolfgang Denk
• [U-Boot] [PATCH] openrisc: Work around potential relocation issues   Wolfgang Denk
• [U-Boot] [PATCH] u-boot: Update yaffs2 file system   Wolfgang Denk
  • [U-Boot] [PATCH] u-boot: Update yaffs2 file system   Wolfgang Denk
    • [U-Boot] [PATCH] u-boot: Update yaffs2 file system   Wolfgang Denk
• [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support   Wolfgang Denk
  • [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
    • [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support   Wolfgang Denk
• [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Benoît Thébaudeau
  • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Marek Vasut
    • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Marek Vasut
      • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Marek Vasut
      • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 1/8] ehci: cosmetic: Define used constants   Marek Vasut
  • [U-Boot] [PATCH v4 0/7] ehci: Improve performance   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 1/7] ehci: cosmetic: Define used constants   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 2/7] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 0/7] ehci: Improve performance   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints   Benoît Thébaudeau
      • [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints   Ilya Yanok
      • [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints   Benoît Thébaudeau
      • [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints   Marek Vasut
    • [U-Boot] [PATCH v4 5/7] usb_storage: Adjust time-outs   Benoît Thébaudeau
      • [U-Boot] [PATCH v4 5/7] usb_storage: Adjust time-outs   Ilya Yanok
      • [U-Boot] [PATCH v4 5/7] usb_storage: Adjust time-outs   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 3/7] usb_storage: Restore non-EHCI support   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 6/7] usb_stor_BBB_transport: Do not delay when not required   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 7/7] ehci: Optimize qTD allocations   Benoît Thébaudeau
    • [U-Boot] [PATCH v4 0/7] ehci: Improve performance   Marek Vasut
      • [U-Boot] [PATCH v4 0/7] ehci: Improve performance   Benoît Thébaudeau
      • [U-Boot] [PATCH v4 0/7] ehci: Improve performance   Marek Vasut
• [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Wolfgang Denk
  • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Rob Herring
    • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Marek Vasut
    • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Wolfgang Denk
    • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Wolfgang Denk
      • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Rob Herring
      • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Wolfgang Denk
      • [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Rob Herring
• [U-Boot] [PATCH v3 2/8] ehci: Fail for multi-transaction interrupt transfers   Benoît Thébaudeau
  • [U-Boot] [PATCH v3 2/8] ehci: Fail for multi-transaction interrupt transfers   Marek Vasut
• [U-Boot] [PATCH V5 2/2] ext4fs write support   Wolfgang Denk
  • [U-Boot] [PATCH V5 2/2] ext4fs write support   Wolfgang Denk
    • [U-Boot] [PATCH V5 2/2] ext4fs write support   uma.shankar at samsung.com
• [U-Boot] [PATCH v3 3/8] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
  • [U-Boot] [PATCH v3 3/8] ehci-hcd: Boost transfer speed   Marek Vasut
• [U-Boot] [PATCH v3 4/8] usb_storage: Restore non-EHCI support   Benoît Thébaudeau
• [U-Boot] [PATCH v3 5/8] usb_storage: Remove EHCI constraints   Benoît Thébaudeau
• [U-Boot] [PATCH v3 6/8] usb_storage: Adjust time-outs   Benoît Thébaudeau
• [U-Boot] [PATCH v3 7/8] usb_stor_BBB_transport: Do not delay when not required   Benoît Thébaudeau
• [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations   Benoît Thébaudeau
  • [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations   Marek Vasut
  • [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations   Marek Vasut
    • [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 8/8] ehci: Optimize qTD allocations   Marek Vasut
      • [U-Boot] [PATCH v2] doc/git-mailrc: Add 'rmobile' alias   Nobuhiro Iwamatsu
• [U-Boot] Why no cache flushing in do_go_exec()   Charles Manning
  • [U-Boot] Why no cache flushing in do_go_exec()   Mike Frysinger
    • [U-Boot] am33xx evm: Update secure_emif_sdram_config during ddr init   Satyanarayana, Sandhya
    • [U-Boot] am33xx evm: Update secure_emif_sdram_config during ddr init   Tom Rini
    • [U-Boot] [PATCH] serial: CONSOLE macro is not used   Michal Simek
    • [U-Boot] [PATCH] serial: CONSOLE macro is not used   Mike Frysinger
    • [U-Boot] [PATCH] serial: CONSOLE macro is not used   Anatolij Gustschin
    • [U-Boot] [PATCH] microblaze: Call spi_init function   Michal Simek
    • [U-Boot] [PATCH] microblaze: Call spi_init function   Stephan Linz
    • [U-Boot] [PATCH v3] arm: rmobile: Add basic support for Renesas R-Mobile   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] arm: rmobile: Add support PFC of Renesas R8A7740   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] arm: rmobile: Add support PFC of Renesas SH73A0   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] arm: rmobile: Add support Renesas R8A7740   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function   Kim Phillips
    • [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function   Kim Phillips
    • [U-Boot] [PATCH 25/37] arm: rmobile: Add support TMU base timer function   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] sh: Add support pin function control using GPIO   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup   Bastian Ruppert
    • [U-Boot] [PATCH 2/6] davinci: ea20: the console is always set to the serial line   Bastian Ruppert
    • [U-Boot] [PATCH 2/6] davinci: ea20: the console is always set to the serial line   Stefano Babic
    • [U-Boot] [PATCH 3/6] video: cfb_console: logo can be positioned via the splashpos variable   Bastian Ruppert
    • [U-Boot] [PATCH 4/6] video: cfb_console: add function to plot the logo area black   Bastian Ruppert
    • [U-Boot] [PATCH 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed   Bastian Ruppert
    • [U-Boot] [PATCH 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed   Stefano Babic
    • [U-Boot] [PATCH 6/6] davinci: ea20: add some configs and default environmet variables   Bastian Ruppert
    • [U-Boot] [PATCH 6/6] davinci: ea20: add some configs and default environmet variables   Stefano Babic
    • [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup   Tom Rini
    • [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup   Tom Rini
    • [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup   Stefano Babic
    • [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0   Mike Frysinger
    • [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
    • [U-Boot] [PATCH v2 1/1] USB: EHCI: Initialize multiple USB controllers at once   Stephen Warren
    • [U-Boot] [PATCH 1/1] tegra20: Initialize multiple USB controllers at once   Jim Lin
    • [U-Boot] [PATCH 0/4] arm:samsung: Cleanup code for trats and universal boards   Piotr Wilczek
    • [U-Boot] [PATCH 1/4] arm:exynos4:trats: Correct SDRAM configuration for trats   Piotr Wilczek
    • [U-Boot] [PATCH 2/4] arm:exynos4:trats: Fix SDRAM size   Piotr Wilczek
    • [U-Boot] [PATCH 3/4] arm:exynos4: Set common code for trats and universal_c210 boards   Piotr Wilczek
    • [U-Boot] [PATCH 3/4] arm:exynos4: Set common code for trats and universal_c210 boards   Minkyu Kang
    • [U-Boot] [PATCH 3/4] arm:exynos4: Set common code for trats and universal_c210 boards   Piotr Wilczek
    • [U-Boot] [PATCH 0/6 v2] Code cleaup for trats and universal   Piotr Wilczek
    • [U-Boot] [PATCH 1/6 v2] arm:exynos4:trats: Correct SDRAM configuration for trats   Piotr Wilczek
    • [U-Boot] [PATCH v3 0/6] Code cleaup for trats and universal   Piotr Wilczek
    • [U-Boot] [PATCH v3 1/6] arm:exynos4:trats: Correct SDRAM configuration for trats   Piotr Wilczek
    • [U-Boot] [PATCH v3 2/6] arm:exynos4:trats: Fix SDRAM size   Piotr Wilczek
    • [U-Boot] [PATCH v3 3/6] arm:exynos4:pinmux: Modify the gpio function for mmc   Piotr Wilczek
    • [U-Boot] [PATCH v3 4/6] arm:exynos4:trats: Use pinmux for mmc configuration   Piotr Wilczek
    • [U-Boot] [PATCH v3 5/6] arm:exynos4:universal: Use pinmux for mmc configuration   Piotr Wilczek
    • [U-Boot] [PATCH v3 6/6] arm:exynos4:universal: Eliminated low level init   Piotr Wilczek
    • [U-Boot] [PATCH 2/6 v2] arm:exynos4:trats: Fix SDRAM size   Piotr Wilczek
    • [U-Boot] [PATCH 3/6 v2] arm:exynos4:pinmux: Modify the gpio function for mmc   Piotr Wilczek
    • [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration   Piotr Wilczek
    • [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration   Jaehoon Chung
    • [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration   Piotr Wilczek
    • [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration   Jaehoon Chung
    • [U-Boot] [PATCH 4/6 v2] arm:exynos4:trats: Use pinmux for mmc configuration   Piotr Wilczek
    • [U-Boot] [PATCH 5/6 v2] arm:exynos4:universal: Use pinmux for mmc configuration   Piotr Wilczek
    • [U-Boot] [PATCH 6/6 v2] arm:exynos4:universal: Eliminated low level init   Piotr Wilczek
    • [U-Boot] [PATCH 4/4] arm:exynos4:universal_c210: Eliminate low level initialisation   Piotr Wilczek
  • [U-Boot] Change console output from DUART to APPUART   mad mad
    • [U-Boot] Change console output from DUART to APPUART   Albert ARIBAUD
    • [U-Boot] Change console output from DUART to APPUART   Fabio Estevam
    • [U-Boot] [PATCH] sf: stmicro: Add support for N25Q128A   Michal Simek
    • [U-Boot] [PATCH] sf: stmicro: Add support for N25Q128A   Mike Frysinger
    • [U-Boot] [PATCH][v4] powerpc/CoreNet: add tool to support pbl image build.   Shaohui Xie
    • [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area.   Tom Rini
    • [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2   Tom Rini
    • [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver   Tom Rini
    • [U-Boot] [PATCH 00/11] Support for ST-Ericsson snowball board   Tom Rini
    • [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
      • [U-Boot] Please pull u-boot-staging/trini at ti.com   Wolfgang Denk
      • [U-Boot] Please pull u-boot-staging/trini at ti.com   Albert ARIBAUD (U-Boot)
      • [U-Boot] Please pull u-boot-staging/trini at ti.com   Albert ARIBAUD (U-Boot)
      • [U-Boot] Please pull u-boot-staging/trini at ti.com   Mathieu Poirier
      • [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
• [U-Boot] Pull request: u-boot-nds32   Macpaul Lin
  • [U-Boot] Pull request: u-boot-nds32   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Cleanup and extend env vars   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/5] fw_env: Add env vars describing U-Boot target board   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/5] env_common: Add missing ethprime   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/5] env import/export: Remove from help if disabled   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/5] env import/export: Remove from help if disabled   Mike Frysinger
  • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Benoît Thébaudeau
    • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Mike Frysinger
      • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Benoît Thébaudeau
      • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Wolfgang Denk
      • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Benoît Thébaudeau
      • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Mike Frysinger
      • [U-Boot] [PATCH] README: Update ver env var description   Benoît Thébaudeau
      • [U-Boot] [PATCH] README: Update ver env var description   Mike Frysinger
      • [U-Boot] [PATCH 4/5] README: The ver env var is not read-only   Wolfgang Denk
  • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Benoît Thébaudeau
    • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Mike Frysinger
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Benoît Thébaudeau
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Wolfgang Denk
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Benoît Thébaudeau
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Benoît Thébaudeau
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Wolfgang Denk
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Jeroen Hofstee
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Mike Frysinger
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Benoît Thébaudeau
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Wolfgang Denk
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Benoît Thébaudeau
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Wolfgang Denk
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Mike Frysinger
      • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Wolfgang Denk
    • [U-Boot] [PATCH 5/5] Add env var giving the board revision   Wolfgang Denk
• [U-Boot] [PATCH] eth_write_hwaddr: Return error for invalid MACs   Benoît Thébaudeau
  • [U-Boot] [PATCH] eth_write_hwaddr: Return error for invalid MACs   Mike Frysinger
  • [U-Boot] Fail to compile a DEBUG version of u-boot.bin for Freescale MPC8536DS   Yuming Chen
• [U-Boot] [PATCH] mxc_spi: Round up clock divider   Benoît Thébaudeau
  • [U-Boot] [PATCH] mxc_spi: Round up clock divider   Stefano Babic
    • [U-Boot] [PATCH] mxc_spi: Round up clock divider   Benoît Thébaudeau
  • [U-Boot] [PATCH] mxc_spi: Round up clock divider   Stefano Babic
• [U-Boot] [PATCH] mmc_get_dev: Return error if mmc_init fails   Benoît Thébaudeau
• [U-Boot] [PATCH] mmcinfo: Fix help message   Benoît Thébaudeau
• [U-Boot] [PATCH] mtest: Disable dcache during test   Benoît Thébaudeau
  • [U-Boot] [PATCH] mtest: Disable dcache during test   Mike Frysinger
    • [U-Boot] [PATCH] mtest: Disable dcache during test   Benoît Thébaudeau
      • [U-Boot] [PATCH] mtest: Disable dcache during test   Mike Frysinger
      • [U-Boot] [PATCH] mtest: Disable dcache during test   Benoît Thébaudeau
• [U-Boot] [PATCH] avr32: Remove redundant LDSCRIPT definition   Benoît Thébaudeau
  • [U-Boot] [PATCH] avr32: Remove redundant LDSCRIPT definition   Andreas Bießmann
• [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Anatolij Gustschin
• [U-Boot] arm: omap: Fix switching back to nandecc sw.   Jeroen Hofstee
  • [U-Boot] arm: omap: Fix switching back to nandecc sw.   Igor Grinberg
    • [U-Boot] arm: omap: Fix switching back to nandecc sw.   Nikita Kiryanov
  • [U-Boot] [PATCH v2] arm: omap: Fix switching back to nandecc sw.   Jeroen Hofstee
    • [U-Boot] [PATCH v2] arm: omap: Fix switching back to nandecc sw.   Jeroen Hofstee
      • [U-Boot] [PATCH v2] arm: omap: Fix switching back to nandecc sw.   Tom Rini
• [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file   Anatolij Gustschin
• [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] c6x: Add support c6745-som board   Wolfgang Denk
  • [U-Boot] [PATCH] powerpc/mpc8xxx: Remove P1015 and P1016 from CPU list   York Sun
• [U-Boot] [PATCH 1/3] Makefile: allow appending to LIB in sub-makefiles   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y   Wolfgang Denk
  • [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y   Marek Vasut
• [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Benoît Thébaudeau
  • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Stefano Babic
    • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Benoît Thébaudeau
      • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Stefano Babic
      • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Benoît Thébaudeau
      • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   stefano babic
      • [U-Boot] [PATCH 1/2] imx: Define architecture identifier   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX   Stefano Babic
      • [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] fsl_esdhc: Remove cache snooping for i.MX   Stefano Babic
      • [U-Boot] [PATCH v2 2/2] fsl_esdhc: Remove cache snooping for i.MX   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 2/2] fsl_esdhc: Remove cache snooping for i.MX   Benoît Thébaudeau
      • [U-Boot] [PATCH 1/2] imx: Define architecture identifier   Otavio Salvador
      • [U-Boot] [PATCH v3 1/2] mxc: Define architecture identifier   Benoît Thébaudeau
      • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Stefano Babic
      • [U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init   Benoît Thébaudeau
• [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Wolfgang Denk
  • [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Kumar Gala
  • [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Kumar Gala
• [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)   Wolfgang Denk
  • [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)   Kumar Gala
  • [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)   Kumar Gala
• [U-Boot] [PATCH] Add support for DS1388.   Wolfgang Denk
• [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Wolfgang Denk
• [U-Boot] [PATCH, v2] dts/Makefile: Turn off some predefined macros   Wolfgang Denk
• [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S   Benoît Thébaudeau
  • [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S   Tom Rini
  • [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S   Benoît Thébaudeau
  • [U-Boot] [PATCH] armv7: Move save_boot_params_default() to start.S   Tom Rini
  • [U-Boot] [PATCH 1/6] powerpc/85xx: add support for FM2 DTSEC5   Timur Tabi
  • [U-Boot] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()   Timur Tabi
  • [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()   Kim Phillips
  • [U-Boot] [PATCH 5/6] powerpc/85xx: get rid of enum board_slots in P4080 MDIO driver   Timur Tabi
  • [U-Boot] [PATCH 6/6] powerpc/85xx: update P4080DS MDIO bus multiplexer support   Timur Tabi
  • [U-Boot] [PATCH 2/6] fm-eth: add function fm_info_get_phy_address()   Timur Tabi
  • [U-Boot] [PATCH 4/6] fm-eth: use fdt_status_disabled() function in ft_fixup_port()   Timur Tabi
• [U-Boot] [PATCH] armv7 cpu_init_crit: Simplify code   Benoît Thébaudeau
• [U-Boot] [PATCH v4] tx25: Use generic gpio_* calls   Anatolij Gustschin
• [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash   Scott Wood
  • [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash   Zhong Hongbo
    • [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash   Scott Wood
• [U-Boot] [PATCH] tegra: enable NAND on Harmony   Scott Wood
  • [U-Boot] [PATCH] tegra: enable NAND on Harmony   Stephen Warren
• [U-Boot] Strange / Unreadable console output   Jerry Van Baren
  • [U-Boot] Strange / Unreadable console output   Markus Hubig
  • [U-Boot] Strange / Unreadable console output   Jerry Van Baren
  • [U-Boot] Strange / Unreadable console output   Markus Hubig
• [U-Boot] multiple definition of `reloc_dst'   Sabri Altunbas
• [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Mike Frysinger
  • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Stefan Roese
• [U-Boot] [PATCH] mtest: Disable dcache during test   Benoît Thébaudeau
  • [U-Boot] [PATCH] mtest: Disable dcache during test   Mike Frysinger
    • [U-Boot] [PATCH] mtest: Disable dcache during test   Benoît Thébaudeau
      • [U-Boot] [PATCH] mtest: Print dcache state   Benoît Thébaudeau
      • [U-Boot] [PATCH] mtest: Disable dcache during test   Albert ARIBAUD
• [U-Boot] Fwd: Re: [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Graeme Russ
  • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Wolfgang Denk
      • [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd   Troy Kisky
      • [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd   Marek Vasut
      • [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd   Marek Vasut
      • [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd   Troy Kisky
      • [U-Boot] [PATCH 1/1] USB: Fix strict aliasing in ohci-hcd   Marek Vasut
• [U-Boot] Is there file size limiation of tftp   J.Hwan Kim
  • [U-Boot] Is there file size limiation of tftp   Mike Frysinger
  • [U-Boot] Is there file size limiation of tftp   Jerry Van Baren
    • [U-Boot] Is there file size limiation of tftp   Wolfgang Denk
  • [U-Boot] Atheros AR7141 MIPS support   Drassal, Allan
• [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
  • [U-Boot] usb_test_unit_ready called every block read - performance   Steve Heckman
  • [U-Boot] usb_test_unit_ready called every block read - performance   Jim Shimer
    • [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
      • [U-Boot] CREDITS for some old code   Jeremy Andrus
      • [U-Boot] CREDITS for some old code   Wolfgang Denk
      • [U-Boot] CREDITS for some old code   Stefan Roese
      • [U-Boot] u-boot support for if - then - else scripting   Bud Miljkovic
      • [U-Boot] u-boot support for if - then - else scripting   Wolfgang Denk
      • [U-Boot] [PATCH 0/5] *** Qualcomm chipset support patches ***   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 1/5] MSM7630: USB Gadget support   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 2/5] MSM 7x27a: Add support for qualcomm msm 7x27a SOC   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 3/5] MSM 7x27a: Add support for qualcomm msm7x27a surf board   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 4/5] MSM7x27a: USB Gadget support   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 5/5] fix for MMC write issue   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 0/5] *** Qualcomm chipset support patches ***   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 1/5] MSM7630: USB Gadget support   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 2/5] MSM 7x27a: Add support for qualcomm msm 7x27a SOC   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 3/5] MSM 7x27a: Add support for qualcomm msm7x27a surf board   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 4/5] MSM7x27a: USB Gadget support   Srikanth Reddy Vintha
      • [U-Boot] [PATCH 5/5] fix for MMC write issue   Srikanth Reddy Vintha
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Andreas Bießmann
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Mike Frysinger
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Andreas Bießmann
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Andreas Bießmann
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Andreas Bießmann
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Simon Glass
      • [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning   Andreas Bießmann
      • [U-Boot] [PATCH 1/4] mpc5xxx: add pci_mpc5xxx_init prototype to common header   Anatolij Gustschin
      • [U-Boot] [PATCH 2/4] mpc5xxx: add GPIO port configuration   Anatolij Gustschin
      • [U-Boot] [PATCH 3/4] mpc52xx: add common o2dnt and o2dnt2 support and configurations   Anatolij Gustschin
      • [U-Boot] [PATCH v2 3/4] mpc52xx: add common o2dnt and o2dnt2 support and configurations   Anatolij Gustschin
      • [U-Boot] [PATCH 4/4] mpc52xx: remove o2dnt board   Anatolij Gustschin
      • [U-Boot] [PATCH 4/4] mpc52xx: remove o2dnt board   Anatolij Gustschin
      • [U-Boot] [PATCH 4/4] mpc52xx: remove o2dnt board   Anatolij Gustschin
      • [U-Boot] [PATCH v2 4/4] mpc52xx: remove o2dnt board   Anatolij Gustschin
• [U-Boot] A question on UFS support   Shashidhar Hiremath
  • [U-Boot] [PATCH v4] Consolidate bootcount code into drivers/bootcount   Stefan Roese
  • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Christian Riesch
  • [U-Boot] [PATCH v4] Consolidate bootcount code into drivers/bootcount   Mike Frysinger
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
  • [U-Boot] Please pull u-boot-cfi-flash/master   Wolfgang Denk
• [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Andreas Bießmann
  • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Stefan Roese
    • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Andreas Bießmann
      • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Stefan Roese
      • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Andreas Bießmann
      • [U-Boot] [PATCH v1 1/3] mxs: Remove unused iomux-mx28.h   Otavio Salvador
      • [U-Boot] [PATCH v1 2/3] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Otavio Salvador
      • [U-Boot] [PATCH v1 2/3] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Marek Vasut
      • [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'   Otavio Salvador
      • [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'   Marek Vasut
      • [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'   Otavio Salvador
      • [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'   Marek Vasut
      • [U-Boot] [PATCH v1 3/3] mxs: Convert sys_proto.h prefixes to 'mxs'   Otavio Salvador
      • [U-Boot] [PATCH v1 1/3] mxs: Remove unused iomux-mx28.h   Marek Vasut
• [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Andreas Bießmann
  • [U-Boot] [PATCH 1/6] p1014rdb: set ddr bus width properly depending on SVR   Matthew McClintock
  • [U-Boot] [PATCH 2/6] p1010rdb: fix ddr values for p1014rdb (setting bus width to 16bit)   Matthew McClintock
  • [U-Boot] [PATCH 3/6] powerpc/p1010rdb: nandboot: compare SVR properly   Matthew McClintock
  • [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards   Matthew McClintock
  • [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards   Scott Wood
  • [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards   McClintock Matthew-B29882
  • [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards   Scott Wood
  • [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards   McClintock Matthew-B29882
  • [U-Boot] [PATCH 4/6] nand_spl: update udelay for Freescale boards   Scott Wood
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   Matthew McClintock
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   Scott Wood
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   McClintock Matthew-B29882
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   Scott Wood
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   McClintock Matthew-B29882
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   Scott Wood
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   Andy Fleming
  • [U-Boot] [PATCH 6/6] nand_spl: change out_be32 to raw_writel and depend on subsequent sync   Scott Wood
  • [U-Boot] [PATCH 5/6] nand_spl: p1023rds: wait before enabling DDR controller   Matthew McClintock
  • [U-Boot] [PATCH 5/6] nand_spl: p1023rds: wait before enabling DDR controller   Scott Wood
  • [U-Boot] [PATCH 5/6] nand_spl: p1023rds: wait before enabling DDR controller   McClintock Matthew-B29882
  • [U-Boot] [PATCH v2 1/4] mxs: Remove not required explicit iomux-mx28.h include   Otavio Salvador
  • [U-Boot] [PATCH v2 2/4] mxs: Remove not required include of iomux-mx28.h   Otavio Salvador
  • [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Otavio Salvador
  • [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Stefano Babic
  • [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Otavio Salvador
  • [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Stefano Babic
  • [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Otavio Salvador
  • [U-Boot] [PATCH v2 3/4] mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Marek Vasut
  • [U-Boot] [PATCH v2 4/4] mxs: Convert sys_proto.h prefixes to 'mxs'   Otavio Salvador
  • [U-Boot] [PATCH v2 1/4] mxs: Remove not required explicit iomux-mx28.h include   Marek Vasut
  • [U-Boot] [PATCH v2 1/4] mxs: Remove not required explicit iomux-mx28.h include   Stefano Babic
  • [U-Boot] [PATCH v2 4/6] nand_spl: update udelay for Freescale boards   Matthew McClintock
  • [U-Boot] [PATCH v2 5/6] nand_spl: p1023rds: wait before enabling DDR controller   Matthew McClintock
  • [U-Boot] [PATCH] patman: Allow for changelog use in first version of a series   Otavio Salvador
  • [U-Boot] [PATCH] patman: Allow for changelog use in first version of a series   Simon Glass
• [U-Boot] u-boot preventing access to NAND chip on imx28evk board   Bill
  • [U-Boot] u-boot preventing access to NAND chip on imx28evk board   Fabio Estevam
  • [U-Boot] Configure U-boot to output to LCD on imx28evk board   Bill
    • [U-Boot] Configure U-boot to output to LCD on imx28evk board   Fabio Estevam
    • [U-Boot] Configure U-boot to output to LCD on imx28evk board   Bill
    • [U-Boot] Configure U-boot to output to LCD on imx28evk board   Fabio Estevam
• [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
  • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Benoît Thébaudeau
    • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Stefano Babic
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Benoît Thébaudeau
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Stefano Babic
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Benoît Thébaudeau
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Stefano Babic
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Benoît Thébaudeau
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Benoît Thébaudeau
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Stefano Babic
      • [U-Boot] [PATCH 01/13] mxc nand: Merge mtd and spl register definitions   Scott Wood
  • [U-Boot] [PATCH 02/13] mxc nand: cosmectic: Light cleanup   Benoît Thébaudeau
    • [U-Boot] [PATCH 02/13] mxc nand: cosmectic: Light cleanup   Stefano Babic
  • [U-Boot] [PATCH 03/13] spl mxc nand: Merge duplicated code   Benoît Thébaudeau
    • [U-Boot] [PATCH 03/13] spl mxc nand: Merge duplicated code   Stefano Babic
  • [U-Boot] [PATCH 04/13] spl mxc nand: Remove duplicated code   Benoît Thébaudeau
  • [U-Boot] [PATCH 05/13] spl mxc nand: Set symmetric mode   Benoît Thébaudeau
  • [U-Boot] [PATCH 06/13] mxc nand: Access all ecc_status_result fields   Benoît Thébaudeau
  • [U-Boot] [PATCH 07/13] spl mxc nand: Fix broken boot for correctable ECC errors   Benoît Thébaudeau
  • [U-Boot] [PATCH 08/13] mtd mxc nand: Use _mxc_nand_enable_hwecc()   Benoît Thébaudeau
    • [U-Boot] [PATCH 08/13] mtd mxc nand: Use _mxc_nand_enable_hwecc()   Stefano Babic
      • [U-Boot] [PATCH 08/13] mtd mxc nand: Use _mxc_nand_enable_hwecc()   Benoît Thébaudeau
  • [U-Boot] [PATCH 09/13] mtd mxc nand: Fix ECC state after read_page_raw_syndrome()   Benoît Thébaudeau
  • [U-Boot] [PATCH 10/13] mtd mxc nand: Merge init functions   Benoît Thébaudeau
  • [U-Boot] [PATCH 11/13] mxc nand: Let driver detect IP revision   Benoît Thébaudeau
    • [U-Boot] [PATCH 11/13] mxc nand: Let driver detect IP revision   Stefano Babic
  • [U-Boot] [PATCH 12/13] mxc nand: Homogenize IP revisions with Linux   Benoît Thébaudeau
  • [U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
    • [U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5   Troy Kisky
      • [U-Boot] [PATCH 13/13] mxc nand: Add support for i.MX5   Troy Kisky
    • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Scott Wood
• [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()   Timur Tabi
  • [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()   Kim Phillips
    • [U-Boot] [u-boot-release] [PATCH 3/6] powerpc/85xx: introduce function serdes_device_from_fm_port()   Timur Tabi
      • [U-Boot] [PATCH] sf: winbond: fix page_size   Stephen Warren
      • [U-Boot] [PATCH] sf: winbond: fix page_size   Mike Frysinger
      • [U-Boot] [PATCH v3 4/6] nand_spl: update udelay for Freescale boards   Matthew McClintock
      • [U-Boot] [PATCH] mpc85xx: use LCRR_DBYP define instead of raw constant   Paul Gortmaker
• [U-Boot] Commit 8b5a02640adf77301f943e8754992c50df004e8a breaks about 20 ARM builds   Albert ARIBAUD (U-Boot)
  • [U-Boot] Commit 8b5a02640adf77301f943e8754992c50df004e8a breaks about 20 ARM builds   Daniel Schwierzeck
    • [U-Boot] [PATCH] Credits for MCF5249 initialization code   Jeremy Andrus
• [U-Boot] [PATCH] Makefile: fix HAVE_VENDOR_COMMON_LIB   Scott Wood
  • [U-Boot] [PATCH v2] Makefile: fix HAVE_VENDOR_COMMON_LIB   Daniel Schwierzeck
  • [U-Boot] [PATCH v2] Makefile: fix HAVE_VENDOR_COMMON_LIB   Kim Phillips
  • [U-Boot] [PATCH v2] Makefile: fix HAVE_VENDOR_COMMON_LIB   Detlev Zundel
• [U-Boot] Help : Keyboard Enabling at U-boot   Simon Glass
  • [U-Boot] [PATCH 0/9] EXYNOS5: Add Audio support   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/9] SOUND: Add I2S driver   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/9] SOUND: Add I2S driver   Andrew Dyer
  • [U-Boot] [PATCH 1/9] SOUND: Add I2S driver   Rajeshwari Birje
  • [U-Boot] [PATCH 1/9] SOUND: Add I2S driver   Andrew Dyer
  • [U-Boot] [PATCH 1/9] SOUND: Add I2S driver   Mike Frysinger
  • [U-Boot] [PATCH 1/9] SOUND: Add I2S driver   Rajeshwari Birje
  • [U-Boot] [PATCH 2/9] SOUND: Add WM8994 codec   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/9] Sound: Add command for audio playback   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/9] EXYNOS: Add I2S registers   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/9] EXYNOS: Add parameters required by I2S   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/9] EXYNOS: Add pinmux for I2S   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/9] EXYNOS: Add pinmux for I2S   Chander Kashyap
  • [U-Boot] [PATCH 6/9] EXYNOS: Add pinmux for I2S   Rajeshwari Birje
  • [U-Boot] [PATCH 7/9] EXYNOS: Add I2S base address   Rajeshwari Shinde
  • [U-Boot] [PATCH 8/9] EXYNOS: Add clock for I2S   Rajeshwari Shinde
  • [U-Boot] [PATCH 9/9] EXYNOS5: Enable Sound   Rajeshwari Shinde
  • [U-Boot] [PATCH 9/9] EXYNOS5: Enable Sound   Chander Kashyap
  • [U-Boot] [PATCH 9/9] EXYNOS5: Enable Sound   Rajeshwari Birje
• [U-Boot] Strange / Unreadable console output   Andreas Bießmann
  • [U-Boot] Strange / Unreadable console output   Markus Hubig
  • [U-Boot] Strange / Unreadable console output   Andreas Bießmann
  • [U-Boot] Strange / Unreadable console output   Markus Hubig
  • [U-Boot] Strange / Unreadable console output   Andreas Bießmann
  • [U-Boot] please pull u-boot-avr32/master   Andreas Bießmann
  • [U-Boot] please pull u-boot-avr32/master   Andreas Bießmann
  • [U-Boot] please pull u-boot-avr32/master   Albert ARIBAUD (U-Boot)
  • [U-Boot] please pull u-boot-avr32/master   Andreas Bießmann
  • [U-Boot] please pull u-boot-avr32/master   Tom Rini
• [U-Boot] [PATCH] kw_spi: fix clock prescaler computation   Valentin Longchamp
  • [U-Boot] [PATCH] kw_spi: fix clock prescaler computation   Prafulla Wadaskar
    • [U-Boot] [PATCH] kw_spi: fix clock prescaler computation   Valentin Longchamp
    • [U-Boot] [PATCH v2] kw_spi: fix clock prescaler computation   Valentin Longchamp
    • [U-Boot] [PATCH v2] kw_spi: fix clock prescaler computation   Prafulla Wadaskar
    • [U-Boot] [PATCH] davinci: enbw_cmc: change switch init behaviour   Heiko Schocher
    • [U-Boot] [PATCH] davinci: enbw_cmc: change switch init behaviour   Tom Rini
    • [U-Boot] [PATCH 1/4] spi_nor: add m25p32 spi nor driver   Terry Lv
    • [U-Boot] [PATCH 1/4] spi_nor: add m25p32 spi nor driver   Mike Frysinger
    • [U-Boot] [PATCH 1/4] spi_nor: add m25p32 spi nor driver   Lv Terry-R65388
    • [U-Boot] [PATCH 2/4] mx53_smd: add spi nor support   Terry Lv
    • [U-Boot] [PATCH 3/4] mxc_spi: change to use version config instead of soc config in mxc_spi   Terry Lv
    • [U-Boot] [PATCH 4/4] mxc_spi: apply new mxc_spi version configs to other soc configs   Terry Lv
    • [U-Boot] [PATCH] sf: spansion: Add support for S25FL256S   Michal Simek
    • [U-Boot] [PATCH] sf: spansion: Add support for S25FL256S   Mike Frysinger
    • [U-Boot] [PATCH] arm: Remove additional config flags   Michal Simek
    • [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names   Valentin Longchamp
    • [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names   Prafulla Wadaskar
    • [U-Boot] [PATCH] arm/km: fix frequency of the SPI NOR Flash   Valentin Longchamp
    • [U-Boot] [PATCH] arm/km: fix frequency of the SPI NOR Flash   Prafulla Wadaskar
    • [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters   Valentin Longchamp
    • [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters   Prafulla Wadaskar
    • [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters   Valentin Longchamp
    • [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters   Prafulla Wadaskar
    • [U-Boot] Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver   Michal Simek
    • [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver   Joe Hershberger
    • [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver   Michal Simek
    • [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver   Joe Hershberger
    • [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver   Michal Simek
    • [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver   John Williams
    • [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP   Michal Simek
    • [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP   Joe Hershberger
    • [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP   Michal Simek
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Joe Hershberger
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Joe Hershberger
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Joe Hershberger
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Joe Hershberger
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform   Marek Vasut
    • [U-Boot] [PATCH 4/4] xilinx: Add new Zynq board   Michal Simek
    • [U-Boot] [PATCH 4/4] xilinx: Add new Zynq board   Michal Simek
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Michal Simek
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Joe Hershberger
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Michal Simek
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Joe Hershberger
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Michal Simek
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Joe Hershberger
    • [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board   Michal Simek
• [U-Boot] [PATCH 0/5] Make iim support common to mpc and imx   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/5] imx iim: Homogenize and fix register definitions   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/5] imx iim: Add useful fuse definitions   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/5] Add fuse API and commands   Stefano Babic
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/5] Add fuse API and commands   Dirk Behme
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Dirk Behme
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Stefano Babic
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Eric Nelson
  • [U-Boot] [PATCH 4/5] Add fsl_iim driver   Benoît Thébaudeau
    • [U-Boot] [PATCH 4/5] Add fsl_iim driver   Stefano Babic
      • [U-Boot] [PATCH 4/5] Add fsl_iim driver   Benoît Thébaudeau
      • [U-Boot] [PATCH 4/5] Add fsl_iim driver   Stefano Babic
  • [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim   Benoît Thébaudeau
    • [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim   Benoît Thébaudeau
    • [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim   Stefano Babic
• [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF   Benoît Thébaudeau
• [U-Boot] [PATCH] mx25: Enable dcache   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx25: Enable dcache   Stefano Babic
  • [U-Boot] [PATCH] mx25: Enable dcache   Stefano Babic
• [U-Boot] [PATCH] mx5: Enable dcache   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5: Enable dcache   Stefano Babic
  • [U-Boot] [PATCH] mx5: Enable dcache   Stefano Babic
• [U-Boot] [PATCH] mx35: Fix typo on EDIO   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx35: Fix typo on EDIO   Stefano Babic
  • [U-Boot] [PATCH] mx35: Fix typo on EDIO   Stefano Babic
• [U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN   Stefano Babic
  • [U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN   Stefano Babic
• [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION   Stefano Babic
    • [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION   Benoît Thébaudeau
      • [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION   Stefano Babic
      • [U-Boot] [PATCH] mx5 iomux: Fix GPIO with SION   Benoît Thébaudeau
      • [U-Boot] [PATCH] snowball: Adding architecture dependent initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH] snowball: Adding architecture dependent initialisation   Tom Rini
• [U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/4] mx5: Optimize lowlevel_init code size   Benoît Thébaudeau
    • [U-Boot] [PATCH 2/4] mx5: Optimize lowlevel_init code size   Otavio Salvador
    • [U-Boot] [PATCH v2 2/4] mx5: Optimize lowlevel_init code size   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/4] mx5: Optimize lowlevel_init for TO 3   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/4] mx5: Optimize lowlevel_init for TO 3   Otavio Salvador
    • [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3   Stefano Babic
    • [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3   Benoît Thébaudeau
  • [U-Boot] [PATCH 4/4] mx5: Mark lowlevel_init board-specific code   Benoît Thébaudeau
    • [U-Boot] [PATCH 4/4] mx5: Mark lowlevel_init board-specific code   Benoît Thébaudeau
    • [U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init   Otavio Salvador
      • [U-Boot] [PATCH v2 1/4] mx5: cosmetic: Clean up lowlevel_init   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 1/4] mx5: cosmetic: Clean up lowlevel_init   Stefano Babic
      • [U-Boot] [PATCH v2 1/4] mx5: cosmetic: Clean up lowlevel_init   Stefano Babic
• [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32   Stefano Babic
    • [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32   Benoît Thébaudeau
      • [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32   Stefano Babic
      • [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32   Benoît Thébaudeau
      • [U-Boot] [PATCH] mx5/6 timer: Use defined CONFIG_SYS_MX*_CLK32   Stefano Babic
• [U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value   Stefano Babic
  • [U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value   Stefano Babic
  • [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot   Zhi-zhou Zhang
    • [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot   Mike Frysinger
      • [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot   Mike Frysinger
      • [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot   Zhi-zhou Zhang
      • [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot   Daniel Schwierzeck
      • [U-Boot] [Patch 0/17] New 'qemu-mips64' test architecture for U-Boot   Zhi-zhou Zhang
  • [U-Boot] [Patch 1/17] add mips64 build configuration in mips/config.mk   Zhi-zhou Zhang
    • [U-Boot] [Patch 1/17] add mips64 build configuration in mips/config.mk   Daniel Schwierzeck
  • [U-Boot] [Patch 2/17] add mips64/Makefile   Zhi-zhou Zhang
• [U-Boot] [Patch 3/16] add mips64/cache.S   Zhi-zhou Zhang
• [U-Boot] [Patch 4/16] add mips64/config.mk   Zhi-zhou Zhang
  • [U-Boot] [Patch 4/16] add mips64/config.mk   Daniel Schwierzeck
  • [U-Boot] [Patch 5/16] add mips64/cpu.h   Zhi-zhou Zhang
    • [U-Boot] [Patch 5/16] add mips64/cpu.h   Daniel Schwierzeck
    • [U-Boot] [Patch 6/16] add mips64/interrupts.c   Zhi-zhou Zhang
  • [U-Boot] [Patch 7/16] add mips64/start.S   Zhi-zhou Zhang
• [U-Boot] [Patch 8/16] add mips64/time.c   Zhi-zhou Zhang
• [U-Boot] [Patch 9/16] make UNCACHED_SDRAM available for mips64   Zhi-zhou Zhang
  • [U-Boot] [Patch 10/16] add supports to mips64 in io operation   Zhi-zhou Zhang
  • [U-Boot] [Patch 11/16] make size_t equal to unsigned int   Zhi-zhou Zhang
    • [U-Boot] [Patch 11/16] make size_t equal to unsigned int   Daniel Schwierzeck
• [U-Boot] [Patch 12/16] add config about mips64   Zhi-zhou Zhang
  • [U-Boot] [Patch 12/16] add config about mips64   Daniel Schwierzeck
• [U-Boot] [Patch 13/16] add link script of qemu-mips64   Zhi-zhou Zhang
• [U-Boot] [Patch 14/16] add board qemu-mips64   Zhi-zhou Zhang
  • [U-Boot] [Patch 15/16] add standalone link script   Zhi-zhou Zhang
    • [U-Boot] [Patch 15/16] add standalone link script   Daniel Schwierzeck
  • [U-Boot] [Patch 16/16] add configs/qemu-mips64.h   Zhi-zhou Zhang
• [U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value   Stefano Babic
    • [U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value   Benoît Thébaudeau
      • [U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value   Benoît Thébaudeau
      • [U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value   Stefano Babic
      • [U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value   Stefano Babic
• [U-Boot] [PATCH 1/2] mx5: Add default pin initializers   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Benoît Thébaudeau
    • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Matt Sealey
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Matt Sealey
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Matt Sealey
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Stefano Babic
      • [U-Boot] [PATCH 2/2] mx5: Use default pin initializers   Marek Vasut
      • [U-Boot] [PATCH 1/2] mx5: Add default pin initializers   Matt Sealey
      • [U-Boot] [PATCH 1/2] mx5: Add default pin initializers   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/2] mx5: Add default pin initializers   Stefano Babic
    • [U-Boot] [PATCH 1/2] mx5: Add default pin initializers   Matt Sealey
      • [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
• [U-Boot] smc911x and CONFIG_NET_MULTI   Dimitar Penev
  • [U-Boot] smc911x and CONFIG_NET_MULTI   Mike Frysinger
    • [U-Boot] [PATCH 1/7] powerpc/85xx: add support for FM2 DTSEC5   Timur Tabi
    • [U-Boot] [PATCH 2/7] fm-eth: add function fm_info_get_phy_address()   Timur Tabi
    • [U-Boot] [PATCH 3/7] [v2] powerpc/85xx: introduce function serdes_device_from_fm_port()   Timur Tabi
    • [U-Boot] [PATCH 4/7] fm-eth: use fdt_status_disabled() function in ft_fixup_port()   Timur Tabi
    • [U-Boot] [PATCH 5/7] powerpc/85xx: get rid of enum board_slots in P4080 MDIO driver   Timur Tabi
    • [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support   Timur Tabi
    • [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support   Kumar Gala
    • [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support   Timur Tabi
    • [U-Boot] [PATCH 6/7] powerpc/85xx: update P4080DS MDIO bus multiplexer support   Kumar Gala
    • [U-Boot] [PATCH 7/7] powerpc/85xx: remove support for the Freescale P3060   Timur Tabi
• [U-Boot] Redundant Env   Sridhar Addagada
  • [U-Boot] Redundant Env   Sridhar Addagada
• [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
• [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
  • [U-Boot] usb_test_unit_ready called every block read - performance   Steve Heckman
    • [U-Boot] usb_test_unit_ready called every block read - performance   Jim Shimer
• [U-Boot] [PATCH 00/10] mx5: Fix clocks   Benoît Thébaudeau
  • [U-Boot] [PATCH 01/10] mx5: Undeclare imx_decode_pll()   Benoît Thébaudeau
    • [U-Boot] [PATCH 01/10] mx5: Undeclare imx_decode_pll()   Stefano Babic
  • [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names   Benoît Thébaudeau
    • [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names   Marek Vasut
      • [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names   Benoît Thébaudeau
  • [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions   Benoît Thébaudeau
    • [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions   Marek Vasut
      • [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions   Benoît Thébaudeau
      • [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions   Marek Vasut
  • [U-Boot] [PATCH 04/10] mx5 clocks: Fix get_lp_apm()   Benoît Thébaudeau
  • [U-Boot] [PATCH 05/10] mx5 clocks: Fix get_periph_clk()   Benoît Thébaudeau
  • [U-Boot] [PATCH 06/10] mx5 clocks: Fix get_ipg_per_clk()   Benoît Thébaudeau
  • [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk()   Benoît Thébaudeau
    • [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk()   Stefano Babic
      • [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk()   Stefano Babic
  • [U-Boot] [PATCH 08/10] mx5 clocks: Simplify imx_get_cspiclk()   Benoît Thébaudeau
  • [U-Boot] [PATCH 09/10] mx5 clocks: Fix eSDHC clock   Benoît Thébaudeau
  • [U-Boot] [PATCH 10/10] mx5 clocks: Fix MXC_FEC_CLK   Benoît Thébaudeau
• [U-Boot] [PATCH] mx31: Fix PDR0_CSI_PODF   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx31: Fix PDR0_CSI_PODF   Benoît Thébaudeau
• [U-Boot] [PATCH] mx31: Add more CCM access macros   Benoît Thébaudeau
• [U-Boot] [PATCH] Fix mx31_decode_pll   Benoît Thébaudeau
• [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Marek Vasut
  • [U-Boot] [PATCH] COMMON: Fix HAVE_VENDOR_COMMON_LIB mistake   Marek Vasut
  • [U-Boot] [PATCH] COMMON: Fix HAVE_VENDOR_COMMON_LIB mistake   Daniel Schwierzeck
  • [U-Boot] [PATCH] COMMON: Fix HAVE_VENDOR_COMMON_LIB mistake   Marek Vasut
• [U-Boot] [PATCH 1/6] mx35 iomux: Remove unused macro   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/6] mx35 gpio: Homogenize register naming   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions   Stefano Babic
    • [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions   Stefano Babic
    • [U-Boot] [PATCH 3/6] mx35: Fix broken pin definitions   Stefano Babic
  • [U-Boot] [PATCH 4/6] mx35: Remove declaration of non-existing function   Benoît Thébaudeau
    • [U-Boot] [PATCH 4/6] mx35: Remove declaration of non-existing function   Stefano Babic
    • [U-Boot] [PATCH 4/6] mx35: Remove declaration of non-existing function   Stefano Babic
  • [U-Boot] [PATCH 5/6] mx35: Add default pin initializers   Benoît Thébaudeau
    • [U-Boot] [PATCH 5/6] mx35: Add default pin initializers   Stefano Babic
  • [U-Boot] [PATCH 6/6] mx35: Use default pin initializers   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/6] mx35 iomux: Remove unused macro   Stefano Babic
• [U-Boot] [PATCH] mx35 timer: Switch to 32-kHz source   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx35 timer: Switch to 32-kHz source   Stefano Babic
    • [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/2] mx35 timer: Switch to 32-kHz source   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/2] mx35 timer: Switch to 32-kHz source   Stefano Babic
      • [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies   Stefano Babic
      • [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies   Stefano Babic
      • [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 1/2] mx35: Define default SoC input clock frequencies   Stefano Babic
      • [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols   Scott Wood
      • [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols   Kumar Gala
      • [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols   Scott Wood
      • [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols   Kumar Gala
      • [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols   Scott Wood
      • [U-Boot] [PATCH 1/3] powerpc/fsl-corenet: remove dead variant symbols   Kumar Gala
      • [U-Boot] [PATCH 2/3] powerpc/85xx: clear out TLB on boot   Scott Wood
      • [U-Boot] [PATCH v2] powerpc/85xx: clear out TLB on boot   Scott Wood
      • [U-Boot] [PATCH v3] powerpc/85xx: clear out TLB on boot   Scott Wood
      • [U-Boot] [PATCH v3] powerpc/85xx: clear out TLB on boot   Prabhakar Kushwaha
      • [U-Boot] [PATCH 3/3] powerpc/fsl-corenet: work around erratum A004510   Scott Wood
      • [U-Boot] [PATCH] YAFFS2: Fix compiler errors preventing successful build   Marek Vasut
      • [U-Boot] [PATCH] YAFFS2: Fix compiler errors preventing successful build   Charles Manning
      • [U-Boot] [PATCH] YAFFS2: Fix compiler errors preventing successful build   Marek Vasut
• [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/7] mx35: Remove declaration of non-existing function   Benoît Thébaudeau
    • [U-Boot] [PATCH 2/7] mx35: Remove declaration of non-existing function   Stefano Babic
  • [U-Boot] [PATCH 3/7] mx35: Fix decode_pll   Benoît Thébaudeau
  • [U-Boot] [PATCH 4/7] mx35: Add definitions for clock gate values   Benoît Thébaudeau
  • [U-Boot] [PATCH 5/7] mx35: Fix clock dividers   Benoît Thébaudeau
  • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Benoît Thébaudeau
    • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Stefano Babic
      • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Benoît Thébaudeau
      • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Benoît Thébaudeau
      • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Stefano Babic
      • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Benoît Thébaudeau
      • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Stefano Babic
      • [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks   Benoît Thébaudeau
  • [U-Boot] [PATCH 7/7] mx35: Add cpu_mmc_init()   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 7/7] mx35: Add cpu_mmc_init()   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 7/7] mx35: Add cpu_mmc_init()   Stefano Babic
      • [U-Boot] [PATCH v2 7/7] mx35: Add cpu_mmc_init()   Stefano Babic
  • [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h   Stefano Babic
  • [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h   Stefano Babic
• [U-Boot] [PATCH 0/1] fix some SPL debug builds.   Jeroen Hofstee
  • [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).   Jeroen Hofstee
    • [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).   Tom Rini
    • [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).   Stefano Babic
    • [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).   Tom Rini
    • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
      • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Scott Wood
      • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
    • [U-Boot] [PATCHv2 2/2] powerpc: Stack Pointer not properly aligned   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] mx35: Remove duplicate GPIO3_BASE_ADDR   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/3] mx35: Define MAX and AIPS registers   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init   Benoît Thébaudeau
      • [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init   stefano babic
      • [U-Boot] [PATCH v2 3/3] mx35: Clean up lowlevel_init   Benoît Thébaudeau
      • [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init   Fabio Estevam
      • [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init   Stefano Babic
      • [U-Boot] [PATCH 3/3] mx35: Clean up lowlevel_init   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/3] mx35: Remove duplicate GPIO3_BASE_ADDR   Stefano Babic
  • [U-Boot] [PATCH 1/3] mx35: Remove duplicate GPIO3_BASE_ADDR   Stefano Babic
• [U-Boot] [PATCH] mx25: Clean up lowlevel_init   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx25: Clean up lowlevel_init   Matthias Weißer
    • [U-Boot] [PATCH] mx25: Clean up lowlevel_init   Benoît Thébaudeau
      • [U-Boot] [PATCH v2] mx25: Clean up lowlevel_init   Benoît Thébaudeau
      • [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init   Benoît Thébaudeau
      • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Kumar Gala
      • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
      • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Scott Wood
      • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Andy Fleming
      • [U-Boot] [PATCH] ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT   Bo Shen
      • [U-Boot] [PATCH] ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT   Andreas Bießmann
      • [U-Boot] [PATCH] u-boot yaffs2: Fix compilation warnings   Charles Manning
      • [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support   Terry Lv
      • [U-Boot] [PATCH 2/3] mxc_spi: change to use version config instead of soc config in mxc_spi   Terry Lv
      • [U-Boot] [PATCH 2/3] mxc_spi: change to use version config instead of soc config in mxc_spi   Stefano Babic
      • [U-Boot] [PATCH 3/3] mxc_spi: apply new mxc_spi version configs to other soc configs   Terry Lv
      • [U-Boot] [PATCH 3/3] mxc_spi: apply new mxc_spi version configs to other soc configs   Stefano Babic
      • [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support   Stefano Babic
      • [U-Boot] V4 S3C64XX: Switch all I/O to use readl/writel functio and Clear SMDK64XX   Zhong Hongbo
      • [U-Boot] [PATCH 01/14] smdk6400: Move smdk6400 board from Makefile to boards.cfg   Zhong Hongbo
      • [U-Boot] [PATCH 02/14] S3C64XX: Switch to use readl/writel to operate nand flash   Zhong Hongbo
      • [U-Boot] [PATCH 03/14] S3C64XX: Use readl/writel to operate uart   Zhong Hongbo
      • [U-Boot] [PATCH 04/14] S3C64XX: add pwm for s3c64xx support   Zhong Hongbo
      • [U-Boot] [PATCH 05/14] S3C64XX: reference s5p cpu time system for s3c64xx timer   Zhong Hongbo
      • [U-Boot] [PATCH 06/14] S3C64xx: mov cpu_init.S to the board directory   Zhong Hongbo
      • [U-Boot] [PATCH 07/14] S3C6400: Adopt SPL framwork to support spl for nand flash   Zhong Hongbo
      • [U-Boot] [PATCH 08/14] S3C6400: Delete nand_spl for S3C6400   Zhong Hongbo
      • [U-Boot] [PATCH 09/14] S3C64XX: Change SROM init to use read/write operation   Zhong Hongbo
      • [U-Boot] [PATCH 10/14] S3C64XX: Switch to use read/writel to operation clock system   Zhong Hongbo
      • [U-Boot] [PATCH 11/14] S3c64xx: clear GPIO, Interrupt, Watchdog variable.   Zhong Hongbo
      • [U-Boot] [PATCH 12/14] S3C6400: clear memory init variable   Zhong Hongbo
      • [U-Boot] [PATCH 13/14] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board   Zhong Hongbo
      • [U-Boot] [PATCH 14/14] S3C6400: Remove the unused variable for S3C6400   Zhong Hongbo
      • [U-Boot] [PATCH] powerpc/mpc85xx:Enable debugger support to missed e500v2 SoC   Prabhakar Kushwaha
      • [U-Boot] [PATCH] powerpc/mpc85xx: Add IFC LAW target ID for FSL High-End SoC   Prabhakar Kushwaha
• [U-Boot] usb_test_unit_ready called every block read - performance   Steve Heckman
  • [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
    • [U-Boot] [PATCH 1/2] README.SPL: Add a small Debugging section   Tom Rini
    • [U-Boot] [PATCH 2/2] README.SPL: Move the 'Estimating stack usage' from omap3 to here   Tom Rini
    • [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call   Otavio Salvador
    • [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration   Otavio Salvador
    • [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration   Stefano Babic
    • [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration   Marek Vasut
    • [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call   Stefano Babic
    • [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call   Marek Vasut
    • [U-Boot] [PATCH] patman: Do not Cc addresses included in To list   Otavio Salvador
    • [U-Boot] [PATCH] patman: Do not Cc addresses included in To list   Simon Glass
    • [U-Boot] [PATCH] patman: Do not Cc addresses included in To list   Otavio Salvador
    • [U-Boot] [PATCH] patman: Do not Cc addresses included in To list   Simon Glass
    • [U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines   Troy Kisky
    • [U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines   Stefano Babic
    • [U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines   Stefano Babic
    • [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command   Troy Kisky
    • [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command   Stefano Babic
    • [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command   Stefano Babic
    • [U-Boot] [PATCH V4 2/3] mx6qsabrelite: add boot_mode support   Troy Kisky
    • [U-Boot] [PATCH V4 3/3] mx53evk: add boot_mode support   Troy Kisky
    • [U-Boot] [PATCH 1/3] phy: add phy_connect_by_mask   Troy Kisky
    • [U-Boot] [PATCH 2/3] fec_mxc: use phy_connect_by_mask   Troy Kisky
    • [U-Boot] [PATCH 2/3] fec_mxc: use phy_connect_by_mask   Stefano Babic
    • [U-Boot] [PATCH 2/3] fec_mxc: use phy_connect_by_mask   Troy Kisky
    • [U-Boot] [PATCH 3/3] mx6qsabrelite: set CONFIG_FEC_MXC_PHYMASK   Troy Kisky
    • [U-Boot] [PATCH v8 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
    • [U-Boot] [PATCH v8 01/15] tegra20: rename tegra2 -> tegra20   Allen Martin
    • [U-Boot] [PATCH v8 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
    • [U-Boot] [PATCH v8 04/15] tegra20: tec: add tegra20-common-post.h   Allen Martin
    • [U-Boot] [PATCH v8 05/15] tegra20: make board mkdir commands unconditional   Allen Martin
    • [U-Boot] [PATCH v8 06/15] mkconfig: add support for SPL CPU   Allen Martin
    • [U-Boot] [PATCH v8 07/15] ARM: Fix arm720t SPL build   Allen Martin
    • [U-Boot] [PATCH v8 08/15] tegra20: remove timer_init from SPL build   Allen Martin
    • [U-Boot] [PATCH v8 09/15] ARM: add tegra20 support to arm720t   Allen Martin
    • [U-Boot] [PATCH v8 10/15] tegra20: add u-boot-*-tegra.bin targets   Allen Martin
    • [U-Boot] [PATCH v8 11/15] tegra20: move SDRAM param save to later in boot   Allen Martin
    • [U-Boot] [PATCH v8 12/15] tegra20: enable SPL for tegra20 boards   Allen Martin
    • [U-Boot] [PATCH v8 13/15] arm: enable libgcc build for SPL   Allen Martin
    • [U-Boot] [PATCH v8 14/15] spl: fix SPL build of private libgcc   Allen Martin
    • [U-Boot] [PATCH v8 15/15] tegra20: Remove armv4t build flags   Allen Martin
    • [U-Boot] [PATCH v8 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
    • [U-Boot] [PATCH v8 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
    • [U-Boot] [PATCH 1/1] mx51/mx53/mx6: add watchdog   Troy Kisky
    • [U-Boot] [PATCH 1/1] mx51/mx53/mx6: add watchdog   Stefano Babic
    • [U-Boot] [PATCH 1/1] mx51/mx53/mx6: add watchdog   Troy Kisky
    • [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
    • [U-Boot] [PATCH 01/17] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Tom Rini
    • [U-Boot] [PATCH 01/17] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Stefano Babic
    • [U-Boot] [PATCH 02/17] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()   Tom Rini
    • [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib   Tom Rini
    • [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib   Stefano Babic
    • [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib   Tom Rini
    • [U-Boot] [PATCH 03/17] ARM: SPL: Move the omap SPL framework to arch/arm/lib   Stefano Babic
    • [U-Boot] [PATCH 04/17] Makefile: Move SPL files to clobber, remove from clean   Tom Rini
    • [U-Boot] [PATCH 05/17] ARM: SPL: Rename omap_boot_device to spl_boot_device   Tom Rini
    • [U-Boot] [PATCH 06/17] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()   Tom Rini
    • [U-Boot] [PATCH 07/17] omap-common: Fix typo in lowlevel_init.S::save_boot_params   Tom Rini
    • [U-Boot] [PATCH 08/17] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Tom Rini
    • [U-Boot] [PATCH 08/17] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Stefano Babic
    • [U-Boot] [PATCH 09/17] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
    • [U-Boot] [PATCH 09/17] ARM: SPL: Only call mem_malloc_init if configured   Stefano Babic
    • [U-Boot] [PATCH 09/17] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
    • [U-Boot] [PATCH 10/17] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>   Tom Rini
    • [U-Boot] [PATCH 11/17] ARM: SPL: Make spl_mmc.c more generic   Tom Rini
    • [U-Boot] [PATCH 12/17] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
    • [U-Boot] [PATCH 13/17] ARM: SPL: Start hooking in the current SPI SPL support   Tom Rini
    • [U-Boot] [PATCH 14/17] ARM: SPL: Move gpmc_init() to spl_board_init()   Tom Rini
    • [U-Boot] [PATCH 14/17] ARM: SPL: Move gpmc_init() to spl_board_init()   Stefano Babic
    • [U-Boot] [PATCH 15/17] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
    • [U-Boot] [PATCH 15/17] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Christian Riesch
    • [U-Boot] [PATCH 16/17] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Tom Rini
    • [U-Boot] [PATCH 16/17] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Scott Wood
    • [U-Boot] [PATCH 17/17] ARM: SPL: Enhance spi_spl_load to match the other load functions   Tom Rini
    • [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP   Stefan Roese
    • [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
    • [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP   Stefan Roese
    • [U-Boot] [PATCH 00/17]: ARM: SPL: Make more generic, merge DaVinci and OMAP   Stefano Babic
    • [U-Boot] [PATCH v3 0/9] enable thumb for tegra20   Allen Martin
    • [U-Boot] [PATCH v3 1/9] tools, config.mk: add binutils-version   Allen Martin
    • [U-Boot] [PATCH v3 2/9] arm: work around assembler bug   Allen Martin
    • [U-Boot] [PATCH v3 3/9] tegra20: remove inline assembly for u32 cast   Allen Martin
    • [U-Boot] [PATCH v3 5/9] arm: use thumb compatible return in arm720t   Allen Martin
    • [U-Boot] [PATCH v3 6/9] arm: change arm720t to armv4t   Allen Martin
    • [U-Boot] [PATCH v3 7/9] arm720t: add linkage macro for relocate_code   Allen Martin
    • [U-Boot] [PATCH v3 8/9] arm: use thumb interworking returns in libgcc   Allen Martin
    • [U-Boot] [PATCH v3 9/9] tegra20: enable thumb build   Allen Martin
    • [U-Boot] [PATCH v3 4/9] arm: add _thumb1_case_uqi to libgcc   Allen Martin
    • [U-Boot] [V2] disk/partition: Fix the depend for all the partitions file   Zhong Hongbo
    • [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h   York Sun
    • [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h   Kumar Gala
    • [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h   York Sun
    • [U-Boot] [PATCH] powerpc/mpc85xx:Add new ext fields to Freescale's IFC   Prabhakar Kushwaha
    • [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash   Bo Shen
    • [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support   Bo Shen
    • [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support   Mike Frysinger
    • [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support   Bo Shen
    • [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support   Mike Frysinger
    • [U-Boot] [PATCH 2/3] arm : at91sam9x5 : enable serial flash boot   Bo Shen
    • [U-Boot] [PATCH 2/3] arm : at91sam9x5 : enable serial flash boot   Andreas Bießmann
    • [U-Boot] [PATCH 3/3] arm : at91sam9x5 : fix a small bug for NAND   Bo Shen
    • [U-Boot] [PATCH 3/3] arm : at91sam9x5 : fix a small bug for NAND   Andreas Bießmann
    • [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash   Bo Shen
    • [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash   Andreas Bießmann
    • [U-Boot] [PATCH v2 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support   Josh Wu
    • [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().   Josh Wu
    • [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().   Andreas Bießmann
    • [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().   Josh Wu
    • [U-Boot] [PATCH v2 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().   Scott Wood
    • [U-Boot] [PATCH v2 2/5] at91: atmel_nand: remove unused variables.   Josh Wu
    • [U-Boot] [PATCH v2 2/5] at91: atmel_nand: remove unused variables.   Scott Wood
    • [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
    • [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Andreas Bießmann
    • [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
    • [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Scott Wood
    • [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
    • [U-Boot] [PATCH v2 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Scott Wood
    • [U-Boot] [PATCH v2 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.   Josh Wu
    • [U-Boot] [PATCH v2 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.   Andreas Bießmann
    • [U-Boot] [PATCH v2 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.   Josh Wu
    • [U-Boot] [PATCH v2 5/5] at91: 9x5: Enable PMECC for 5series ek board.   Josh Wu
  • [U-Boot] [PATCH 0/8] video: support newly exynos5 display feature   Minkyu Kang
    • [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver   Michal Simek
    • [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP   Michal Simek
    • [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform   Michal Simek
    • [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board   Michal Simek
    • [U-Boot] [PATCH] at91sam9263ek: remove unnecessary console_init_f   Andreas Bießmann
  • [U-Boot] Keyboard enable at u-boot for Beagleboard   LIVIN SUNNY
    • [U-Boot] Keyboard enable at u-boot for Beagleboard   Tom Rini
    • [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer   Nikita Kiryanov
    • [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer   Jeroen Hofstee
    • [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer   Jeroen Hofstee
    • [U-Boot] [PATCH] common/lcd: add protection from null bmp pointer   Nikita Kiryanov
    • [U-Boot] [PATCH] net/phy: support the mv88e6352 switch   Valentin Longchamp
    • [U-Boot] [PATCH] net/phy: support the mv88e6352 switch   Prafulla Wadaskar
    • [U-Boot] [PATCH 0/2] arm/km: configuration of the mv88e6352 switch on kmnusa   Valentin Longchamp
    • [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa   Valentin Longchamp
    • [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa   Prafulla Wadaskar
    • [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa   Valentin Longchamp
    • [U-Boot] [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa   Prafulla Wadaskar
    • [U-Boot] [PATCH v2 1/2] arm/km: add mv88e6352 configuration for kmnusa   Valentin Longchamp
    • [U-Boot] [PATCH v2 1/2] arm/km: add mv88e6352 configuration for kmnusa   Prafulla Wadaskar
    • [U-Boot] [PATCH 2/2] km_kirkwood: enable MV88E6352_SWITCH support for kmnusa   Valentin Longchamp
    • [U-Boot] [PATCH 2/2] km_kirkwood: enable MV88E6352_SWITCH support for kmnusa   Prafulla Wadaskar
    • [U-Boot] [PATCH 0/2] arm/km: configuration of the mv88e6352 switch on kmnusa   Prafulla Wadaskar
    • [U-Boot] [PATCH] net:macb: add line break   Andreas Bießmann
    • [U-Boot] [PATCH] avr32:portmux: fix setup for macb1   Andreas Bießmann
    • [U-Boot] [PATCH] avr32: add atngw100mkii board   Andreas Bießmann
  • [PATCH] cache: wip: Test program to evaluate if L2 is working.   Lukasz Majewski
• [U-Boot] Strange / Unreadable console output   Andreas Bießmann
  • [U-Boot] [SOLVED] Strange / Unreadable console output   Markus Hubig
  • [U-Boot] [SOLVED] Strange / Unreadable console output   Andreas Bießmann
  • [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary   Andreas Bießmann
  • [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary   Bo Shen
  • [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary   Andreas Bießmann
  • [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary   Bo Shen
  • [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary   esw at bus-elektronik.de
  • [U-Boot] [PATCH] README: Cleanup description of supported partitions.   Karl O. Pinc
  • [U-Boot] [PATCH] edminiv2: orion5x: fix GPIO inits and values   Albert ARIBAUD
  • [U-Boot] [PATCH] edminiv2: orion5x: fix GPIO inits and values   Prafulla Wadaskar
  • [U-Boot] 32-bit OS on 64-bit core   Robert Thorhuus
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Prafulla Wadaskar
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Tom Rini
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Prafulla Wadaskar
  • [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Simon Guinot
  • [U-Boot] [PATCH 0/2] at91: Fixes the crippled console output on PortuxG20.   Markus Hubig
  • [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.   Markus Hubig
  • [U-Boot] [PATCH 2/2] Fixes the crippled console output on PortuxG20.   Markus Hubig
  • [U-Boot] [PATCH 0/2] at91: Fixes the crippled console output on PortuxG20.   Markus Hubig
  • [U-Boot] [PATCH 0/2] at91: Fixes the crippled console output on PortuxG20.   Andreas Bießmann
  • [U-Boot] [PATCH v9 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
  • [U-Boot] [PATCH v9 01/15] tegra20: rename tegra2 -> tegra20   Allen Martin
  • [U-Boot] [PATCH v9 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
  • [U-Boot] [PATCH v9 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
  • [U-Boot] [PATCH v9 05/15] tegra20: make board mkdir commands unconditional   Allen Martin
  • [U-Boot] [PATCH v9 06/15] mkconfig: remove bashisms and cleanup config.mk generation   Allen Martin
  • [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build   Allen Martin
  • [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build   Zhong Hongbo
  • [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build   Allen Martin
  • [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build   Zhong Hongbo
  • [U-Boot] [PATCH v9 07/15] ARM: Fix arm720t SPL build   Albert ARIBAUD
  • [U-Boot] [PATCH v9 08/15] tegra20: remove timer_init from SPL build   Allen Martin
  • [U-Boot] [PATCH v9 09/15] ARM: add tegra20 support to arm720t   Allen Martin
  • [U-Boot] [PATCH v9 11/15] tegra20: move SDRAM param save to later in boot   Allen Martin
  • [U-Boot] [PATCH v9 12/15] tegra20: enable SPL for tegra20 boards   Allen Martin
  • [U-Boot] [PATCH v9 13/15] arm: enable libgcc build for SPL   Allen Martin
  • [U-Boot] [PATCH v9 15/15] tegra20: Remove armv4t build flags   Allen Martin
  • [U-Boot] [PATCH v9 04/15] tegra20: tec: add tegra20-common-post.h   Allen Martin
  • [U-Boot] [PATCH v9 10/15] tegra20: add u-boot-*-tegra.bin targets   Allen Martin
  • [U-Boot] [PATCH v9 14/15] spl: fix SPL build of private libgcc   Allen Martin
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   dinguyen at altera.com
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Marek Vasut
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Stefan Roese
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Stefan Roese
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Dinh Nguyen
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Stefan Roese
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Marek Vasut
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Marek Vasut
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Marek Vasut
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
  • [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
  • [U-Boot] [PATCH 1/3] disk: part_efi: parse and store partition UUID   Stephen Warren
  • [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID   Stephen Warren
  • [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID   Stephen Warren
  • [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID   Lukasz Majewski
  • [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID   Stephen Warren
  • [U-Boot] [PATCH 2/3] cmd_partuuid: add command to retrieve a partition's UUID   Lukasz Majewski
  • [U-Boot] [PATCH 3/3] tegra: enable CONFIG_CMD_PARTUUID   Stephen Warren
  • [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount   Stefan Roese
  • [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount   Mike Frysinger
  • [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount   Christian Riesch
• [U-Boot] WARNING: Caches not enabled on openrd based board   Alex Zeffertt
  • [U-Boot] WARNING: Caches not enabled on openrd based board   Lukasz Majewski
    • [U-Boot] WARNING: Caches not enabled on openrd based board   Alex Zeffertt
  • [U-Boot] WARNING: Caches not enabled on openrd based board   Stefan Herbrechtsmeier
    • [U-Boot] WARNING: Caches not enabled on openrd based board   Prafulla Wadaskar
      • [U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c   Mike Frysinger
      • [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c   Zhi-zhou Zhang
      • [U-Boot] [[Patch V2] mips: 05/16] add cpu/mips64/interrupts.c   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 11/16] Make size_t equaled to unsigned long   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 13/16] add board define in boards.cfg   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 03/16] add cpu/mips64/config.mk   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 16/16] modify qemu-mips/config.mk   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Mike Frysinger
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Zhi-zhou Zhang
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Mike Frysinger
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Zhi-zhou Zhang
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Mike Frysinger
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Zhi-zhou Zhang
      • [U-Boot] [[Patch V2] mips: 02/16] add cpu/mips64/Makefile   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 03/16] add cpu/mips64/config.mk   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 03/16] add cpu/mips64/config.mk   Mike Frysinger
      • [U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S   Mike Frysinger
      • [U-Boot] [[Patch V2] mips: 07/16] add cpu/mips64/time.c   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 08/16] Let UNCACHED_SDRAM be available to mips64   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 09/16] add cache description struct   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 10/16] modify io operation for mips64   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 12/16] modify u-boot.lds for mips64   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 12/16] modify u-boot.lds for mips64   Andrew Dyer
      • [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script   Andrew Dyer
      • [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script   Zhi-zhou Zhang
      • [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script   Daniel Schwierzeck
      • [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script   Daniel Schwierzeck
      • [U-Boot] [[Patch V2] mips: 15/16] add configs/qemu-mips64.h   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 15/16] add configs/qemu-mips64.h   Daniel Schwierzeck
      • [U-Boot] [[Patch V2] mips: 16/16] modify qemu-mips/config.mk   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 16/16] modify qemu-mips/config.mk   Daniel Schwierzeck
      • [U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot   Daniel Schwierzeck
      • [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 02/16] add cpu/mips64/Makefile   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 04/16] add cpu/mips64/cpu.c   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 05/16] add cpu/mips64/interrupts.c   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 07/16] add cpu/mips64/time.c   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 08/16] Let UNCACHED_SDRAM be available to mips64   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 09/16] add cache description struct   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 10/16] modify io operation for mips64   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 11/16] Make size_t equaled to unsigned long   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 12/16] modify u-boot.lds for mips64   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 13/16] add board define in boards.cfg   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 14/16] add mips64 standalone link script   Zhizhou Zhang
      • [U-Boot] [[Patch V2] mips: 15/16] add configs/qemu-mips64.h   Zhizhou Zhang
• [U-Boot] [PATCH 2/2] ARM: increase lmb stack space reservation to 4KB   Rob Herring
• [U-Boot] Performance of the ARM's PL310 L2 cache.   Lukasz Majewski
  • [U-Boot] Performance of the ARM's PL310 L2 cache.   Tom Rini
• [U-Boot] ld: section overlaps previous sections   Luciano Moretti
  • [U-Boot] ld: section overlaps previous sections   Tom Rini
  • [U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory   Matt Sealey
  • [U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory   Matt Sealey
  • [U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory   stefano babic
  • [U-Boot] [PATCH 2/2] spi: fix mxs_spi_slave structure allocation to clear memory   Stefano Babic
  • [U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory   stefano babic
  • [U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory   Stefano Babic
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Matt Sealey
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Matt Sealey
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Matt Sealey
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Stefano Babic
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Matt Sealey
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Matt Sealey
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   Shawn Guo
  • [U-Boot] [PATCH] mx5: add iomux-mx51.h include   stefano babic
  • [U-Boot] [PATCH 0/4] efikamx: update Efika MX support   Matt Sealey
  • [U-Boot] [PATCH 1/4] efikamx: move efikamx into a new directory in preparation for new boards   Matt Sealey
  • [U-Boot] [PATCH 1/4] efikamx: move efikamx into a new directory in preparation for new boards   Marek Vasut
  • [U-Boot] [PATCH 1/4] efikamx: move efikamx into a new directory in preparation for new boards   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Marek Vasut
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Marek Vasut
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Stefano Babic
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Marek Vasut
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   stefano babic
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD   stefano babic
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Marek Vasut
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Marek Vasut
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Stefano Babic
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Marek Vasut
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Marek Vasut
  • [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards   stefano babic
  • [U-Boot] [PATCH 4/4] efikamx: port USB setup to new iomux model   Matt Sealey
  • [U-Boot] [PATCH 0/4] efikamx: update Efika MX support   Marek Vasut
  • [U-Boot] [PATCH 1/6] powerpc/mpc8xxx: Add immap for topology and rcpm registers   York Sun
  • [U-Boot] [PATCH 2/6] powerpc/mpc8xxx: use topology registers to calculate number of cores   York Sun
  • [U-Boot] [PATCH 3/6] Add e6500 processor detection   York Sun
  • [U-Boot] [PATCH 4/6] Add IFC offset for DPAA/Corenet platforms   York Sun
  • [U-Boot] [PATCH 5/6] Added new ext fields to IFC   York Sun
  • [U-Boot] [PATCH 6/6] powerpc/mpc8xxx: fix core id for multicore booting   York Sun
  • [U-Boot] [PATCH 6/6] powerpc/mpc8xxx: fix core id for multicore booting   Tabi Timur-B04825
  • [U-Boot] [PATCH 1/8] powerpc/mpc85xx: Skip zero values for DDR debug registers   York Sun
  • [U-Boot] [PATCH 2/8] powerpc/mpc8xxx: Add fine timing support for DDR3   York Sun
  • [U-Boot] [PATCH 3/8] powerpc/mpc8xxx: Add support for cas latency 12 and above   York Sun
  • [U-Boot] [PATCH 4/8] powerpc/mpc8xxx: Enable 3-way and 4-way DDR interleaving   York Sun
  • [U-Boot] [PATCH 5/8] powerpc/mpc8xxx: Fix bug for extended DDR timing   York Sun
  • [U-Boot] [PATCH 6/8] powerpc/mpc8xxx DDR: Fix CAS latency calculation   York Sun
  • [U-Boot] [PATCH 7/8] powerpc/mpc8xxx DDR: Fall back to raw timing for first controller only   York Sun
  • [U-Boot] [PATCH 8/8] powerpc/mpc8xxx DDR: Fix interactive DDR debugging   York Sun
  • [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500   York Sun
  • [U-Boot] [PATCH 02/11] powerpc/mpc85xx: setup stash id for L1 and L2 cache   York Sun
  • [U-Boot] [PATCH 03/11] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2   York Sun
  • [U-Boot] [PATCH 04/11] powerpc/mpc85xx: check number of cores   York Sun
  • [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address   York Sun
  • [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address   Scott Wood
  • [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address   York Sun
  • [U-Boot] [PATCH 05/11] powerpc/mpc85xx: use boot page translation for spin table address   Scott Wood
  • [U-Boot] [PATCH 06/11] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2   York Sun
  • [U-Boot] [PATCH 07/11] powerpc/mpc85xx: expand SERDES reference clock select bit   York Sun
  • [U-Boot] [PATCH 08/11] powerpc/e6500: Move QCSP registers for QMan v3   York Sun
  • [U-Boot] [PATCH 08/11] powerpc/e6500: Move QCSP registers for QMan v3   Andy Fleming
  • [U-Boot] [PATCH 08/11] powerpc/e6500: Move QCSP registers for QMan v3   York Sun
  • [U-Boot] [PATCH 09/11] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2   York Sun
  • [U-Boot] [PATCH 10/11] powerpc/corenet2: Add SerDes for corenet2   York Sun
  • [U-Boot] [PATCH 11/11] powerpc/corenet2: fix mismatch DDR sync bit from RCW   York Sun
  • [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500   Scott Wood
  • [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500   York Sun
  • [U-Boot] [PATCH 01/11] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500   Scott Wood
  • [U-Boot] [PATCH 1/2] Add Vitesse VSC8662 PHY support   York Sun
  • [U-Boot] [PATCH 2/2] board/freescale/common: VSC3316/VSC3308 initialization code   York Sun
  • [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Add T4 device definitions   York Sun
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: Add T4240 SoC   York Sun
  • [U-Boot] [PATCH] powerpc/mpc85xx: Add B4860 SoC   York Sun
  • [U-Boot] [PATCH] powerpc/mpc8xxx: Move HWCONFIG_BUFFER_SIZE into config.h   York Sun
  • [U-Boot] [PATCH 0/2] net: Netconsole port configuration and filtering   Joe Hershberger
  • [U-Boot] [PATCH 1/2] net: Allow netconsole settings to change after nc_start   Joe Hershberger
  • [U-Boot] [PATCH 1/2] net: Allow netconsole settings to change after nc_start   Mike Frysinger
  • [U-Boot] [PATCH 2/2] net: Filter incoming netconsole packets by IP   Joe Hershberger
  • [U-Boot] patman feature request   Tom Rini
    • [U-Boot] patman feature request   Otavio Salvador
    • [U-Boot] patman feature request   Simon Glass
    • [U-Boot] patman feature request   Otavio Salvador
    • [U-Boot] [PATCH 1/2] mmc: Fix version check for clock API in sdhci driver   Joe Hershberger
    • [U-Boot] [PATCH 2/2] mmc: Add a SDHCI quirk for boards that have no CD   Joe Hershberger
    • [U-Boot] [PATCH 1/3] hush: Add default value substitution support   Joe Hershberger
    • [U-Boot] [PATCH 2/3] hush: Don't parse the contents of a dereferenced var   Joe Hershberger
    • [U-Boot] [PATCH 3/3] hush: Include file and line number when reporting syntax errors   Joe Hershberger
    • [U-Boot] [PATCH 3/3] hush: Include file and line number when reporting syntax errors   Mike Frysinger
    • [U-Boot] [PATCH 1/3] hush: Add default value substitution support   Mike Frysinger
    • [U-Boot] [PATCH] arm: Add CONFIG_OF_BOARD_SETUP support to bootm   Joe Hershberger
    • [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert   Joe Hershberger
    • [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert   Scott Wood
    • [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert   Joe Hershberger
    • [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert   Scott Wood
    • [U-Boot] [PATCH 1/3] nand: Add support for unlock.invert   Joe Hershberger
    • [U-Boot] [PATCH v2 1/4] nand: Add support for unlock.invert   Joe Hershberger
    • [U-Boot] [PATCH v2 3/4] nand: consolidate duplicated constants   Joe Hershberger
    • [U-Boot] [PATCH v2 4/4] nand: Make NAND lock status compatible with Micron   Joe Hershberger
    • [U-Boot] [PATCH 2/3] nand: consolidate duplicated constants   Joe Hershberger
    • [U-Boot] [PATCH 3/3] nand: Make NAND lock status compatible with Micron   Joe Hershberger
    • [U-Boot] [PATCH 3/3] nand: Make NAND lock status compatible with Micron   Scott Wood
    • [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips   Łukasz Dałek
    • [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions   Łukasz Dałek
    • [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions   Marek Vasut
    • [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions   Łukasz Dałek
    • [U-Boot] [PATCH 2/3] pxa25x: Add UDC registers definitions   Marek Vasut
    • [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver   Łukasz Dałek
    • [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver   Marek Vasut
    • [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver   Łukasz Dałek
    • [U-Boot] [PATCH 3/3] pxa25x: Add USB ethernet gadget driver   Marek Vasut
    • [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips   Marek Vasut
    • [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips   Łukasz Dałek
    • [U-Boot] [PATCH 1/3] usbether: Fixed bug when using with PXA25X chips   Marek Vasut
    • [U-Boot] [PATCH 1/6] fdt: Check error codes returned from fdtlib when loading ITB   Joe Hershberger
    • [U-Boot] [PATCH 2/6] fdt: Limit printed hex in fdt print and list commands   Joe Hershberger
    • [U-Boot] [PATCH 3/6] fdt: Add get commands to fdt   Joe Hershberger
    • [U-Boot] [PATCH 4/6] fdt: Identify scripts in ITBs as printable strings   Joe Hershberger
    • [U-Boot] [PATCH 5/6] fdt: Check for a token to skip auto-hash validation   Joe Hershberger
    • [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files   Joe Hershberger
    • [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files   Mike Frysinger
    • [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files   Joe Hershberger
    • [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files   Mike Frysinger
    • [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files   Joe Hershberger
    • [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files   Mike Frysinger
    • [U-Boot] [PATCH 1/2] cfi: Check for blank before erase   Joe Hershberger
    • [U-Boot] [PATCH 2/2] cfi: Make the flash erase and write operations abortable   Joe Hershberger
    • [U-Boot] [PATCH 0/12] Add environment type checking and access control   Joe Hershberger
    • [U-Boot] [PATCH 01/12] tools/env: Use a board-specific default env   Joe Hershberger
    • [U-Boot] [PATCH 01/12] tools/env: Use a board-specific default env   Mike Frysinger
    • [U-Boot] [PATCH 01/12] tools/env: Use a board-specific default env   Joe Hershberger
    • [U-Boot] [PATCH 02/12] tools/env: Remove unneeded complexity   Joe Hershberger
    • [U-Boot] [PATCH 02/12] tools/env: Remove unneeded complexity   Mike Frysinger
    • [U-Boot] [PATCH 03/12] tools/env: Don't call env_init() in fw_getenv()   Joe Hershberger
    • [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes   Joe Hershberger
    • [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes   Mike Frysinger
    • [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes   Joe Hershberger
    • [U-Boot] [PATCH 04/12] tools/env: Reduce the impact on real-time processes   Mike Frysinger
    • [U-Boot] [PATCH 05/12] tools/env: Serialize calls to fw_*env   Joe Hershberger
    • [U-Boot] [PATCH 05/12] tools/env: Serialize calls to fw_*env   Mike Frysinger
    • [U-Boot] [PATCH 06/12] env: Make the "silent" env var take effect immediately   Joe Hershberger
    • [U-Boot] [PATCH 06/12] env: Make the "silent" env var take effect immediately   Mike Frysinger
    • [U-Boot] [PATCH 08/12] env: Check for NULL pointer in envmatch()   Joe Hershberger
    • [U-Boot] [PATCH 08/12] env: Check for NULL pointer in envmatch()   Mike Frysinger
    • [U-Boot] [PATCH 09/12] env: Clarify the cases for env set   Joe Hershberger
    • [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list   Joe Hershberger
    • [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list   Mike Frysinger
    • [U-Boot] [PATCH 11/12] env: acl: Add support for access control to env ACL   Joe Hershberger
    • [U-Boot] [PATCH 12/12] env: cosmetic: Consilidate the default env definition   Joe Hershberger
    • [U-Boot] [PATCH 12/12] env: cosmetic: Consilidate the default env definition   Mike Frysinger
    • [U-Boot] [PATCH 07/12] env: Update serial baudrate in env_relocate()   Joe Hershberger
    • [U-Boot] [PATCH] Allow runtime configuration of "zero-delay" check   Joe Hershberger
    • [U-Boot] [PATCH] Cleanup cache command prints   Joe Hershberger
    • [U-Boot] [PATCH] Cleanup cache command prints   Mike Frysinger
    • [U-Boot] [PATCH] Output strings from echo with puts where easy   Joe Hershberger
    • [U-Boot] [PATCH] Output strings from echo with puts where easy   Mike Frysinger
    • [U-Boot] [PATCH] Change dead code in "test" cmd to debug output   Joe Hershberger
    • [U-Boot] [PATCH] Change dead code in "test" cmd to debug output   Mike Frysinger
    • [U-Boot] [PATCH] Add a new "ini" command   Joe Hershberger
    • [U-Boot] [PATCH] Add a new "ini" command   Mike Frysinger
    • [U-Boot] [PATCH] Add a command to access the system timer   Joe Hershberger
    • [U-Boot] [PATCH] Add a command to access the system timer   Mike Frysinger
    • [U-Boot] [PATCH] Add a memory get command   Joe Hershberger
    • [U-Boot] [PATCH] Add a memory get command   Mike Frysinger
    • [U-Boot] [PATCH 1/2] Add unlzma command   Joe Hershberger
    • [U-Boot] [PATCH 1/2] Add unlzma command   Mike Frysinger
    • [U-Boot] [PATCH 2/2] Add unlzo command   Joe Hershberger
    • [U-Boot] [PATCH 2/2] Add unlzo command   Mike Frysinger
    • [U-Boot] [PATCH 1/4] Implement verify option for sha1sum command   Joe Hershberger
    • [U-Boot] [PATCH 2/4] Add parameter to sha1sum to save the SHA1 sum   Joe Hershberger
    • [U-Boot] [PATCH 3/4] Implement verify option for md5sum command   Joe Hershberger
    • [U-Boot] [PATCH 1/4] Implement verify option for sha1sum command   Mike Frysinger
    • [U-Boot] [PATCH 4/4] Add parameter to md5sum to save the md5 sum   Joe Hershberger
  • [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
    • [U-Boot] Please pull u-boot-staging/trini at ti.com   Albert ARIBAUD
    • [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
    • [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
    • [U-Boot] Please pull u-boot-staging/trini at ti.com   Albert ARIBAUD
    • [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Stefano Babic
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Benoît Thébaudeau
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Matt Sealey
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Marek Vasut
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   stefano babic
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Benoît Thébaudeau
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Stefano Babic
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Fabio Estevam
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   Marek Vasut
  • [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX   stefano babic
  • [U-Boot] [PATCH v2] MX: Set a common gpio.h for all i.MX   Stefano Babic
  • [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX   Stefano Babic
  • [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX   Benoît Thébaudeau
  • [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX   stefano babic
  • [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX   Stefano Babic
  • [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX   Benoît Thébaudeau
  • [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX   Matt Sealey
  • [U-Boot] [PATCH v4] MX: Set a common gpio.h for all i.MX   Stefano Babic
  • [U-Boot] [PATCH] patman: Do not Cc addresses included in To list   Otavio Salvador
  • [U-Boot] [PATCH v3] patman: Do not Cc addresses included in To list   Otavio Salvador
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Otavio Salvador
  • [U-Boot] [PATCH v2 2/2] MX28: Move "regs-base.h" include after SoC type configuration   Otavio Salvador
  • [U-Boot] [PATCH v2 2/2] MX28: Move "regs-base.h" include after SoC type configuration   Marek Vasut
  • [U-Boot] [PATCH v2 2/2] MX28: Move "regs-base.h" include after SoC type configuration   Stefano Babic
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Otavio Salvador
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Otavio Salvador
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   stefano babic
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call   Stefano Babic
  • [U-Boot] [PATCH 1/2] patman: Use reverse order for changelog   Otavio Salvador
  • [U-Boot] [PATCH 2/2] patman: Do not sort changlog items order   Otavio Salvador
• [U-Boot] [PATCH] powerpc/p1_p2_rdb_pc: print -PC suffix in board name   Scott Wood
  • [U-Boot] [PATCH 1/2] pxa25x: Add UDC registers definitions   Łukasz Dałek
  • [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget driver   Łukasz Dałek
  • [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget driver   Marek Vasut
  • [U-Boot] [PATCH 1/2] pxa25x: Add UDC registers definitions   Marek Vasut
  • [U-Boot] U-boot confused - flashing   Daniel Ścisłowski
  • [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Marek Vasut
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Otavio Salvador
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Otavio Salvador
  • [U-Boot] [PATCH 2/2] mxs: Use correct function name to initialize dram   Stefano Babic
  • [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'   Marek Vasut
  • [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'   Stefano Babic
  • [U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'   Stefano Babic
  • [U-Boot] [PATCH v5] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v5] arm: rmobile: Add support Renesas SH73A0   Mike Frysinger
  • [U-Boot] [PATCH v5] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header   Otavio Salvador
  • [U-Boot] [PATCH 2/3] mxs: Only build internal Ethernet controller for i.MX28   Otavio Salvador
  • [U-Boot] [PATCH 2/3] mxs: Only build internal Ethernet controller for i.MX28   Marek Vasut
  • [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'   Otavio Salvador
  • [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'   Marek Vasut
  • [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'   Otavio Salvador
  • [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'   Stefano Babic
  • [U-Boot] [PATCH 3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'   Veli-Pekka Peltola
  • [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header   Marek Vasut
  • [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header   Otavio Salvador
  • [U-Boot] [PATCH 1/3] mxs: Replace i.MX233 by i.MX23 on copyright header   Stefano Babic
  • [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series   Lucas Stach
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Lucas Stach
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Igor Grinberg
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Lucas Stach
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Stephen Warren
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Igor Grinberg
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Igor Grinberg
  • [U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code   Stephen Warren
  • [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series   Igor Grinberg
  • [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series   Lucas Stach
  • [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series   Stephen Warren
  • [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series   Lucas Stach
  • [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series   Stephen Warren
  • [U-Boot] [PATCH 1/3] tegra20: complete periph_id enum   Lucas Stach
  • [U-Boot] [PATCH 1/3] tegra20: complete periph_id enum   Stephen Warren
  • [U-Boot] [PATCH 1/3] tegra20: complete periph_id enum   Simon Glass
  • [U-Boot] [PATCH 2/3] tegra20: add clock_set_pllout function   Lucas Stach
  • [U-Boot] [PATCH 2/3] tegra20: add clock_set_pllout function   Stephen Warren
  • [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype   Lucas Stach
  • [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype   Marek Vasut
  • [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype   Igor Grinberg
  • [U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype   Marek Vasut
  • [U-Boot] [PATCH] tegra20: rework UART GPIO handling   Lucas Stach
  • [U-Boot] [PATCH] tegra20: rework UART GPIO handling   Stephen Warren
  • [U-Boot] [PATCH] tegra20: rework UART GPIO handling   Simon Glass
• [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control   Daniel Schwierzeck
• [U-Boot] [U-Boot-DM] [PATCH 2/3] dm: mips: Fix lb60 timer code   Daniel Schwierzeck
• [U-Boot] [U-Boot-DM] [PATCH 3/3] dm: mips: Fix warnings in lb60 board   Daniel Schwierzeck
  • [U-Boot] [U-Boot-DM] [PATCH 3/3] dm: mips: Fix warnings in lb60 board   Xiangfu Liu
• [U-Boot] [PATCH V2] dm: mips: Import libgcc components from Linux   Daniel Schwierzeck
• [U-Boot] Ethernet-USB adapter   Daniel Ścisłowski
  • [U-Boot] [PATCH V2] common/lcd: add protection from null bmp pointer   Nikita Kiryanov
  • [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation   Bo Shen
  • [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation   Andreas Bießmann
  • [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation   Mike Frysinger
  • [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation   Bo Shen
  • [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation   Bo Shen
  • [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation   Andreas Bießmann
  • [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun   Bo Shen
  • [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun   Andreas Bießmann
  • [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun   Mike Frysinger
  • [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun   Bo Shen
  • [U-Boot] [PATCH 2/4] spi: atmel: add WDRBT bit to avoid receive overrun   Andreas Bießmann
  • [U-Boot] [PATCH 3/4] atmel: at91sam9x5: fix name error for spi   Bo Shen
  • [U-Boot] [PATCH 3/4] atmel: at91sam9x5: fix name error for spi   Andreas Bießmann
  • [U-Boot] [PATCH 4/4] atmel: at91sam9x5: add spi flash boot support   Bo Shen
  • [U-Boot] [PATCH] Take over the maintainer for sam9g10 and sam9m10g45   Bo Shen
  • [U-Boot] [PATCH] Take over the maintainer for sam9g10 and sam9m10g45   Andreas Bießmann
• [U-Boot] Support for USB Ethernet adapter   Marek Vasut
  • [U-Boot] Support for USB Ethernet adapter   Daniel
    • [U-Boot] [PATCH] net: asix: add support for AX88772B   Lucas Stach
    • [U-Boot] [PATCH] net: asix: add support for AX88772B   Marek Vasut
    • [U-Boot] [PATCH] net: asix: add support for AX88772B   Lucas Stach
    • [U-Boot] [PATCH] net: asix: add support for AX88772B   Marek Vasut
    • [U-Boot] [Patch V3 0/4] add mips64 cpu support   Zhizhou Zhang
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Zhizhou Zhang
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Mike Frysinger
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Zhi-zhou Zhang
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Daniel Schwierzeck
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Zhi-zhou Zhang
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Zhi-zhou Zhang
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Daniel Schwierzeck
    • [U-Boot] [Patch V3 2/4] [MIPS] add mips64 support in mips head files   Zhizhou Zhang
    • [U-Boot] [Patch V3 2/4] [MIPS] add mips64 support in mips head files   Daniel Schwierzeck
    • [U-Boot] [Patch V3 3/4] [MIPS] Add qemu-mips building configs   Zhizhou Zhang
    • [U-Boot] [Patch V3 3/4] [MIPS] Add qemu-mips building configs   Daniel Schwierzeck
    • [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64   Zhizhou Zhang
    • [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64   Daniel Schwierzeck
    • [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64   Zhi-zhou Zhang
    • [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64   Daniel Schwierzeck
    • [U-Boot] [Patch V3 0/4] add mips64 cpu support   Zhizhou Zhang
    • [U-Boot] [Patch V3 1/4] [MIPS] Add support for MIPS64 cpus   Zhizhou Zhang
    • [U-Boot] [Patch V3 2/4] [MIPS] add mips64 support in mips head files   Zhizhou Zhang
    • [U-Boot] [Patch V3 3/4] [MIPS] Add qemu-mips building configs   Zhizhou Zhang
    • [U-Boot] [Patch V3 4/4] [MIPS] Disable standalone while building MIPS64   Zhizhou Zhang
    • [U-Boot] [Patch V3 0/4] add mips64 cpu support   Mike Frysinger
    • [U-Boot] [Patch V3 0/4] add mips64 cpu support   Zhi-zhou Zhang
    • [U-Boot] [Patch V3 0/4] add mips64 cpu support   Daniel Schwierzeck
    • [U-Boot] [PATCH v2 0/18] ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
    • [U-Boot] [PATCH v2 01/18] Makefile: Move SPL files to clobber, remove from clean   Tom Rini
    • [U-Boot] [PATCH v2 02/18] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Tom Rini
    • [U-Boot] [PATCH v2 03/18] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()   Tom Rini
    • [U-Boot] [PATCH v2 04/18] omap-common: Fix typo in save_boot_params() in lowlevel_init.S   Tom Rini
    • [U-Boot] [PATCH v2 05/18] ARM: SPL: Rename omap_boot_device to spl_boot_device   Tom Rini
    • [U-Boot] [PATCH v2 06/18] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()   Tom Rini
    • [U-Boot] [PATCH v2 07/18] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Tom Rini
    • [U-Boot] [PATCH v2 08/18] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
    • [U-Boot] [PATCH v2 09/18] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>   Tom Rini
    • [U-Boot] [PATCH v2 10/18] ARM: SPL: Make spl_mmc.c more generic   Tom Rini
    • [U-Boot] [PATCH v2 11/18] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
    • [U-Boot] [PATCH v2 12/18] ARM: SPL: Start hooking in the current SPI SPL support   Tom Rini
    • [U-Boot] [PATCH v2 13/18] ARM: SPL: Move gpmc_init() to spl_board_init()   Tom Rini
    • [U-Boot] [PATCH v2 14/18] SPL: Move the omap SPL framework to common/spl   Tom Rini
    • [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
    • [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Christian Riesch
    • [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Prabhakar Lad
    • [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
    • [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
    • [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Tom Rini
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Prabhakar Lad
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Tom Rini
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Prabhakar Lad
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Tom Rini
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Christian Riesch
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Prabhakar Lad
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Christian Riesch
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Prabhakar Lad
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Christian Riesch
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Prabhakar Lad
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Tom Rini
    • [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm   Tom Rini
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Tom Rini
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Scott Wood
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Scott Wood
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Tom Rini
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Tom Rini
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Scott Wood
    • [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Tom Rini
    • [U-Boot] [PATCH v2 18/18] SPL: Enhance spi_spl_load to match the other load functions   Tom Rini
    • [U-Boot] gcc, ARM, -fdata-sections -fmerge-constants and strings   Tom Rini
      • [U-Boot] [PATCH v2] net: asix: add support for AX88772B   Lucas Stach
      • [U-Boot] [PATCH v2] net: asix: add support for AX88772B   Marek Vasut
      • [U-Boot] [PATCH v2] net: asix: add support for AX88772B   Mike Frysinger
      • [U-Boot] [PATCH v2] net: asix: add support for AX88772B   Joe Hershberger
• [U-Boot] [PATCH] mxc: Make gpio_get_value() use PSR   Benoît Thébaudeau
  • [U-Boot] [PATCH] mxc: Make gpio_get_value() use PSR   Stefano Babic
  • [U-Boot] [PATCH] mxc: Make gpio_get_value() use PSR   Stefano Babic
  • [U-Boot] ROM_SI_REV on MX5   Matt Sealey
    • [U-Boot] ROM_SI_REV on MX5   Benoît Thébaudeau
      • [U-Boot] ROM_SI_REV on MX5   Matt Sealey
      • [U-Boot] ROM_SI_REV on MX5   Benoît Thébaudeau
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Troy Kisky
      • [U-Boot] [PATCH V1 2/3] fec_mxc: use phy_connect_by_mask   Troy Kisky
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Troy Kisky
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Andy Fleming
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Troy Kisky
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Andy Fleming
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Joe Hershberger
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Troy Kisky
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Eric Nelson
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Andy Fleming
      • [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask   Eric Nelson
      • [U-Boot] [PATCH V1 3/3] mx6qsabrelite: set CONFIG_FEC_MXC_PHYMASK   Troy Kisky
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Troy Kisky
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Stefano Babic
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Troy Kisky
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Stefano Babic
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Troy Kisky
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Troy Kisky
      • [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Stefano Babic
• [U-Boot] [PATCH v2] powerpc/p1_p2_rdb_pc: print -PC suffix in board name   Scott Wood
  • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
    • [U-Boot] Seeking ARM development platform suggestions   Jorgen Lundman
      • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
      • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
      • [U-Boot] Seeking ARM development platform suggestions   Jorgen Lundman
      • [U-Boot] Seeking ARM development platform suggestions   Karl O. Pinc
      • [U-Boot] Seeking ARM development platform suggestions   Stefan Roese
      • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
      • [U-Boot] Seeking ARM development platform suggestions   Stefan Roese
      • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
    • [U-Boot] Seeking ARM development platform suggestions   Jason Cooper
      • [U-Boot] Seeking ARM development platform suggestions   Jorgen Lundman
      • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
      • [U-Boot] Seeking ARM development platform suggestions   Jason Cooper
      • [U-Boot] Seeking ARM development platform suggestions   Graeme Russ
      • [U-Boot] Seeking ARM development platform suggestions   Andreas Bießmann
• [U-Boot] CAN support?   lists2k12 at pflutsch.ch
  • [U-Boot] [PATCH 01/13] Blackfin: BF60x: new processor header files   Bob Liu
  • [U-Boot] [PATCH 02/13] Blackfin: bf60x: add serial support   Bob Liu
  • [U-Boot] [PATCH 03/13] Blackfin: bf60x: add dma support   Bob Liu
  • [U-Boot] [PATCH 04/13] Blackfin: Bf60x: support big cplb page   Bob Liu
  • [U-Boot] [PATCH 05/13] Blackfin: bf60x: add rsi/sdh support   Bob Liu
  • [U-Boot] [PATCH 06/13] Blackfin: Bf609-ezkit: implement soft switch   Bob Liu
  • [U-Boot] [PATCH 07/13] Blackfin: Spi: add bf6xx spi driver   Bob Liu
  • [U-Boot] [PATCH 08/13] Blackfin: bf60x: add gpio support   Bob Liu
  • [U-Boot] [PATCH 09/13] Blackfin: bf60x: core changes   Bob Liu
  • [U-Boot] [PATCH 10/13] Blackfin: bf609: add board files   Bob Liu
  • [U-Boot] [PATCH 11/13] Blackfin: Bf60x: add hw watchdog support   Bob Liu
  • [U-Boot] [PATCH 12/13] Blackfin: Bf60x: add resume from hibernate   Bob Liu
  • [U-Boot] [PATCH 13/13] Blackfin: update license to Clear BSD license.   Bob Liu
  • [U-Boot] [PATCH 1/5] sh: tmu: Changed TMU driver using array of structures   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/5] sh: tmu: Changed switch statement to shift operation   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 3/5] sh: tmu: Removed arch/sh/include/asm/clk.h   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] MX28: SPI: Limit the DMA transfer length   Marek Vasut
  • [U-Boot] [PATCH] MX28: SPI: Limit the DMA transfer length   Marek Vasut
  • [U-Boot] U-Boot API Demo Problem   Priebe, Sebastian
  • [U-Boot] U-Boot API Problem   Priebe, Sebastian
    • [U-Boot] [Patch v3 1/2] net: introduce transparent driver private in ueth_data   Lucas Stach
    • [U-Boot] [Patch v3 2/2] net: asix: add support for AX88772B   Lucas Stach
    • [U-Boot] [Patch v3 2/2] net: asix: add support for AX88772B   Mike Frysinger
    • [U-Boot] [Patch v3 1/2] net: introduce transparent driver private in ueth_data   Mike Frysinger
    • [U-Boot] [Patch v3 1/2] net: introduce transparent driver private in ueth_data   Marek Vasut
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Łukasz Dałek
    • [U-Boot] [PATCH 1/2] pxa: Add some stuff to examine cpu model and rev   Łukasz Dałek
    • [U-Boot] [PATCH 1/2] pxa: Add some stuff to examine cpu model and rev   Marek Vasut
    • [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget   Łukasz Dałek
    • [U-Boot] [PATCH 2/2] pxa25x: Add USB ethernet gadget   Marek Vasut
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Marek Vasut
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Marek Vasut
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Łukasz Dałek
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Marek Vasut
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Łukasz Dałek
    • [U-Boot] [PATCH 0/2] PXA25x: USB ethernet driver   Marek Vasut
    • [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1   Marek Vasut
    • [U-Boot] [PATCH 1/7] dm: Add skeleton support for cores and drivers   Marek Vasut
    • [U-Boot] [PATCH 2/7] dm: sandbox: Add necessary linker sections   Marek Vasut
    • [U-Boot] [PATCH 4/7] dm: REMOVE: sandbox binding experiment   Marek Vasut
    • [U-Boot] [PATCH 5/7] dm: gpio: Add draft GPIO core and convert sandbox to use it   Marek Vasut
    • [U-Boot] [PATCH 5/7] dm: gpio: Add draft GPIO core and convert sandbox to use it   Pavel Herrmann
    • [U-Boot] [PATCH 6/7] dm: add dummy demo driver and core   Marek Vasut
    • [U-Boot] [PATCH 7/7] dm: Add "dm dump" command   Marek Vasut
    • [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1   Marek Vasut
    • [U-Boot] [PATCH 3/7] dm: sandbox: Add necessary GD sections   Marek Vasut
• [U-Boot] Add a new protocol   EVS Hardware Dpt
  • [U-Boot] Add a new protocol   Albert ARIBAUD
    • [U-Boot] Add a new protocol   EVS Hardware Dpt
      • [U-Boot] Add a new protocol   Albert ARIBAUD
      • [U-Boot] Add a new protocol   EVS Hardware Dpt
      • [U-Boot] [PATCH 1/3] mx53loco: Use IMX_GPIO_NR macro   Fabio Estevam
      • [U-Boot] [PATCH 2/3] mx51evk: Use IMX_GPIO_NR macro   Fabio Estevam
      • [U-Boot] [PATCH 2/3] mx51evk: Use IMX_GPIO_NR macro   Stefano Babic
      • [U-Boot] [PATCH 1/3] mx53loco: Use IMX_GPIO_NR macro   Troy Kisky
      • [U-Boot] [PATCH 1/3] mx53loco: Use IMX_GPIO_NR macro   Stefano Babic
      • [U-Boot] [PATCH 3/3] mx53ard: Use IMX_GPIO_NR macro   Fabio Estevam
      • [U-Boot] [PATCH 3/3] mx53ard: Use IMX_GPIO_NR macro   Stefano Babic
      • [U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro   Fabio Estevam
      • [U-Boot] [PATCH v2 2/3] mx51evk: Use IMX_GPIO_NR macro   Fabio Estevam
      • [U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro   Stefano Babic
      • [U-Boot] [PATCH v2 3/3] mx53ard: Use IMX_GPIO_NR macro   Fabio Estevam
      • [U-Boot] [PATCH v2 0/5] Tegra 2 USB ULPI series   Lucas Stach
      • [U-Boot] [PATCH v2 2/5] tegra20: add clock_set_pllout function   Lucas Stach
      • [U-Boot] [PATCH v2 5/5] tegra20: add USB ULPI init code   Lucas Stach
      • [U-Boot] [PATCH v2 0/5] Tegra 2 USB ULPI series   Stephen Warren
      • [U-Boot] [PATCH v2 1/5] tegra20: complete periph_id enum   Lucas Stach
      • [U-Boot] [PATCH v2 3/5] usb: fix ulpi_set_vbus prototype   Lucas Stach
      • [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function   Lucas Stach
• [U-Boot] [PATCH] mx25: Define default SoC input clock frequencies   Benoît Thébaudeau
• [U-Boot] [PATCH] mx31: Define default SoC input clock frequencies   Benoît Thébaudeau
  • [U-Boot] [PATCH v3] arm: rmobile: Add support TMU base timer function   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v6] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2] rmobile: Add README   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2] rmobile: Add README   Tom Rini
  • [U-Boot] [PATCH 1/5] MX28: DMA: Align the struct mxs_dma_desc   Marek Vasut
  • [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout   Marek Vasut
  • [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout   Fabio Estevam
  • [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout   Marek Vasut
  • [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout   Fabio Estevam
  • [U-Boot] [PATCH 2/5] MX28: DMA: Prolong the DMA timeout   Marek Vasut
  • [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver   Marek Vasut
  • [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver   Mike Frysinger
  • [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver   Marek Vasut
  • [U-Boot] [PATCH 3/5] MX28: SPI: Supercharge the SPI driver   Mike Frysinger
  • [U-Boot] [PATCH 4/5] MX28: m28evk: Align SSP clock speed   Marek Vasut
  • [U-Boot] [PATCH 5/5] MX28: m28evk: Enable SPI DMA   Marek Vasut
  • [U-Boot] [PATCH 1/5] MX28: DMA: Align the struct mxs_dma_desc   Stefano Babic
  • [U-Boot] [PATCH 0/9 V2] EXYNOS5: Add Audio support   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/9 V2] SOUND: Add I2S driver   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/9 V2] SOUND: Add WM8994 codec   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/9 V2] Sound: Add command for audio playback   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/9 V2] EXYNOS: Add I2S registers   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/9 V2] EXYNOS: Add parameters required by I2S   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/9 V2] EXYNOS: Add pinmux for I2S   Rajeshwari Shinde
  • [U-Boot] [PATCH 7/9 V2] EXYNOS: Add I2S base address   Rajeshwari Shinde
  • [U-Boot] [PATCH 8/9 V2] EXYNOS: Add clock for I2S   Rajeshwari Shinde
  • [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable Sound   Rajeshwari Shinde
  • [U-Boot] [PATCH] fsl_pci: use 'Header Type' field to judge PCIE mode   Minghuan Lian
  • [U-Boot] [PATCH 0/6] net: ASIX AX88772B enablement   Lucas Stach
  • [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning   Lucas Stach
  • [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning   Marek Vasut
  • [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning   Lucas Stach
  • [U-Boot] [PATCH 2/6] net: usbeth: remove misleading warning   Joe Hershberger
  • [U-Boot] [PATCH 3/6] net: asix: split out basic reset function   Lucas Stach
  • [U-Boot] [PATCH 3/6] net: asix: split out basic reset function   Marek Vasut
  • [U-Boot] [PATCH 3/6] net: asix: split out basic reset function   Joe Hershberger
  • [U-Boot] [PATCH 3/6] net: asix: split out basic reset function   Mike Frysinger
  • [U-Boot] [PATCH 3/6] net: asix: split out basic reset function   Lucas Stach
  • [U-Boot] [PATCH 4/6] net: asix: add write_hwaddr function   Lucas Stach
  • [U-Boot] [PATCH 4/6] net: asix: add write_hwaddr function   Marek Vasut
  • [U-Boot] [PATCH 4/6] net: asix: add write_hwaddr function   Joe Hershberger
  • [U-Boot] [PATCH 5/6] net: asix: add read_mac function   Lucas Stach
  • [U-Boot] [PATCH 5/6] net: asix: add read_mac function   Marek Vasut
  • [U-Boot] [PATCH 5/6] net: asix: add read_mac function   Joe Hershberger
  • [U-Boot] [PATCH 6/6] net: asix: add AX88772B support   Lucas Stach
  • [U-Boot] [PATCH 6/6] net: asix: add AX88772B support   Marek Vasut
  • [U-Boot] [PATCH 6/6] net: asix: add AX88772B support   Joe Hershberger
  • [U-Boot] [PATCH 0/6] net: ASIX AX88772B enablement   Marek Vasut
  • [U-Boot] [PATCH 1/6] net: introduce transparent driver private in ueth_data   Lucas Stach
  • [U-Boot] [PATCH 1/6] net: introduce transparent driver private in ueth_data   Marek Vasut
  • [U-Boot] [PATCH 1/6] net: introduce transparent driver private in ueth_data   Joe Hershberger
• [U-Boot] Blackfin BF547 board testing.   Dimitar Penev
  • [U-Boot] Blackfin BF547 board testing.   Mike Frysinger
• [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
  • [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include   Matt Sealey
  • [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include   Stefano Babic
  • [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include   Stefano Babic
  • [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD   Matt Sealey
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD   Stefano Babic
  • [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD   Stefano Babic
  • [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience   Matt Sealey
  • [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience   Stefano Babic
  • [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience   Stefano Babic
  • [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Stefano Babic
  • [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards   Stefano Babic
  • [U-Boot] [PATCH v2] efikamx: update to Efika MX Smarttop and Smartbook boards   Matt Sealey
  • [U-Boot] [PATCH v2] efikamx: update to Efika MX Smarttop and Smartbook boards   Stefano Babic
  • [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards   Stefano Babic
  • [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards   Stefano Babic
  • [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards   Stefano Babic
  • [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'   Fabio Estevam
  • [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'   Marek Vasut
  • [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'   Stefano Babic
  • [U-Boot] [PATCH] mxs: Convert timeout parameter to 'unsigned int'   Stefano Babic
  • [U-Boot] [PATCHv2 0/5] net: ASIX AX88772B enablement   Lucas Stach
  • [U-Boot] [PATCHv2 3/5] net: asix: add write_hwaddr function   Lucas Stach
  • [U-Boot] [PATCHv2 3/5] net: asix: add write_hwaddr function   Joe Hershberger
  • [U-Boot] [PATCHv2 4/5] net: asix: add read_mac function   Lucas Stach
  • [U-Boot] [PATCHv2 5/5] net: asix: add AX88772B support   Lucas Stach
  • [U-Boot] [PATCHv2 1/5] net: introduce transparent driver private in ueth_data   Lucas Stach
  • [U-Boot] [PATCHv2 2/5] net: asix: split out basic reset function   Lucas Stach
• [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Andy Fleming
  • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
  • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Scott Wood
  • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
  • [U-Boot] [PATCH v2 2/4] nand: Change ulong to loff_t and size_t   Joe Hershberger
  • [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
  • [U-Boot] [PATCH v3 02/19] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Tom Rini
  • [U-Boot] [PATCH v3 03/19] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()   Tom Rini
  • [U-Boot] [PATCH v3 04/19] omap-common: Fix typo in save_boot_params() in lowlevel_init.S   Tom Rini
  • [U-Boot] [PATCH v3 05/19] ARM: SPL: Rename omap_boot_device to spl_boot_device   Tom Rini
  • [U-Boot] [PATCH v3 06/19] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()   Tom Rini
  • [U-Boot] [PATCH v3 07/19] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Tom Rini
  • [U-Boot] [PATCH v3 08/19] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
  • [U-Boot] [PATCH v3 09/19] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>   Tom Rini
  • [U-Boot] [PATCH v3 10/19] ARM: SPL: Make spl_mmc.c more generic   Tom Rini
  • [U-Boot] [PATCH v3 11/19] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
  • [U-Boot] [PATCH v3 12/19] ARM: SPL: Start hooking in the current SPI SPL support   Tom Rini
  • [U-Boot] [PATCH v3 13/19] ARM: SPL: Move gpmc_init() to spl_board_init()   Tom Rini
  • [U-Boot] [PATCH v3 14/19] SPL: Move the omap SPL framework to common/spl   Tom Rini
  • [U-Boot] [PATCH v3 15/19] spl: Make CONFIG_SPL_FRAMEWORK board_init_f __weak   Tom Rini
  • [U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
  • [U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Christian Riesch
  • [U-Boot] [PATCH v3 16/19] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
  • [U-Boot] [PATCH v3 17/19] da850: Add README.da850   Tom Rini
  • [U-Boot] [PATCH v3 17/19] da850: Add README.da850   Christian Riesch
  • [U-Boot] [PATCH v3 17/19] da850: Add README.da850   Tom Rini
  • [U-Boot] [PATCH v3 18/19] SPL: Enhance drivers/mtd/nand/nand_spl_load.c   Tom Rini
  • [U-Boot] [PATCH v3 19/19] SPL: Enhance spi_spl_load to match the other load functions   Tom Rini
  • [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP   Prabhakar Lad
  • [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP   Stefan Roese
  • [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP   Stefano Babic
  • [U-Boot] [PATCH v3 0/19] ARM: SPL: Make more generic, merge DaVinci and OMAP   Christian Riesch
  • [U-Boot] [PATCH v3 01/19] Makefile: Move SPL files to clobber, remove from clean   Tom Rini
• [U-Boot] which file would contain SRAM address and FLASH address range   facing_it_all
  • [U-Boot] [PATCH 0/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 1/6] SPL: Add NOR flash booting support   Stefan Roese
  • [U-Boot] [PATCH 1/6] SPL: Add NOR flash booting support   Tom Rini
  • [U-Boot] [PATCH 1/6] SPL: Add NOR flash booting support   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Heiko Schocher
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Daniel Schwierzeck
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Daniel Schwierzeck
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Daniel Schwierzeck
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Daniel Schwierzeck
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 3/6] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH 4/6] env: Extract getenv_f() into separate source file   Stefan Roese
  • [U-Boot] [PATCH 5/6] mpc5200: Add SPL support   Stefan Roese
  • [U-Boot] [PATCH 6/6] mpc5200: Add a3m071 board support   Stefan Roese
  • [U-Boot] [PATCH 0/6] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH 2/6] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
  • [U-Boot] [PATCH] SPL: do not use fix value for u-boot size   Stefano Babic
  • [U-Boot] [PATCH] SPL: do not use fix value for u-boot size   Stefan Roese
  • [U-Boot] [PATCH] SPL: do not use fix value for u-boot size   Stefano Babic
  • [U-Boot] [PATCH] SPL: do not use fix value for u-boot size   Stefan Roese
  • [U-Boot] [PATCH] SPL: do not use fix value for u-boot size   Stefano Babic
  • [U-Boot] [PATCH V2] SPL: do not use fix value for u-boot size   Stefano Babic
  • [U-Boot] [PATCH V2] SPL: do not use fix value for u-boot size   Stefan Roese
  • [U-Boot] [PATCH V2] SPL: do not use fix value for u-boot size   Tom Rini
  • [U-Boot] [PATCH] atmel: sam9g10: correct the text base and move into config.mk   Bo Shen
  • [U-Boot] [PATCH] atmel: sam9g10: correct the text base and move into config.mk   Andreas Bießmann
  • [U-Boot] [PATCH] atmel: sam9g10: correct the text base and move into config.mk   Bo Shen
  • [U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support   Josh Wu
  • [U-Boot] [PATCH v3 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().   Josh Wu
  • [U-Boot] [PATCH v3 2/5] at91: atmel_nand: remove unused variables.   Josh Wu
  • [U-Boot] [PATCH v3 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
  • [U-Boot] [PATCH v3 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.   Josh Wu
  • [U-Boot] [PATCH v3 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.   Bo Shen
  • [U-Boot] [PATCH v3 5/5] at91: 9x5: Enable PMECC for 5series ek board.   Josh Wu
  • [U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support   Josh Wu
  • [U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support   Andreas Bießmann
  • [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition   Matt Sealey
  • [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition   Stefano Babic
  • [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition   Matt Sealey
  • [U-Boot] [PATCH 1/2] efikamx: refine USB support   Matt Sealey
  • [U-Boot] [PATCH 2/2] efikamx: update and clean up configuration   Matt Sealey
  • [U-Boot] [PATCH] efikamx: update MAINTAINERS for Genesi Efika MX systems   Matt Sealey
• [U-Boot] [U-Boot-DM] dwc_ahsata vs ahci   Marek Vasut
• [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro   Ashok
  • [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro   Fabio Estevam
  • [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro   Stefano Babic
    • [U-Boot] ubifsload does not support relative symbolic link   Dev Ma
• [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro   Ashok
  • [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro   Fabio Estevam
  • [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro   Stefano Babic
  • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Andy Fleming
    • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Prabhakar Kushwaha
    • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Scott Wood
      • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Andy Fleming
      • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Scott Wood
      • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Scott Wood
      • [U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions   Tabi Timur-B04825
      • [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Matt Sealey
      • [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Matt Sealey
      • [U-Boot] [PATCH 0/9] Auto partition selection and fs partition consolidation   Rob Herring
      • [U-Boot] [PATCH 1/9] combine block device load commands into common function   Rob Herring
      • [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition   Rob Herring
      • [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition   Stephen Warren
      • [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition   Rob Herring
      • [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition   Stephen Warren
      • [U-Boot] [PATCH 4/9] ext4: remove init_fs/deinit_fs   Rob Herring
      • [U-Boot] [PATCH 5/9] cmd_extX: use common get_device_and_partition function   Rob Herring
      • [U-Boot] [PATCH 6/9] cmd_fat: use common get_device_and_partition function   Rob Herring
      • [U-Boot] [PATCH 7/9] cmd_disk: use common get_device_and_partition function   Rob Herring
      • [U-Boot] [PATCH 8/9] cmd_zfs: use common get_device_and_partition function   Rob Herring
      • [U-Boot] [PATCH 9/9] cmd_reiser: use common get_device_and_partition function   Rob Herring
      • [U-Boot] [PATCH 2/9] disk/part: check bootable flag for DOS partitions   Rob Herring
      • [U-Boot] [PATCH 0/3] MIPS: refactoring for extended Qemu support   daniel.schwierzeck at gmail.com
      • [U-Boot] [PATCH 1/3] MIPS: factor out endianess flag handling to arch config.mk   daniel.schwierzeck at gmail.com
      • [U-Boot] [PATCH 1/3] MIPS: factor out endianess flag handling to arch config.mk   Mike Frysinger
      • [U-Boot] [PATCH 2/3] MIPS: move CONFIG_STANDALONE_LOAD_ADDR to CPU config makefiles   daniel.schwierzeck at gmail.com
      • [U-Boot] [PATCH 3/3] MIPS: add support for qemu for little endian MIPS32 CPUs   daniel.schwierzeck at gmail.com
      • [U-Boot] [PATCH 1/2] nand_spl: p1010rdb: don't write to global variable before reloc   Scott Wood
      • [U-Boot] [PATCH 2/2] nand_spl: p1010rdb: optimize ddr init for size   Scott Wood
      • [U-Boot] [PATCH 0/6] gpt: GUID Partition Table (GPT) restoration   Lukasz Majewski
      • [U-Boot] [PATCH 1/6] gpt:doc: GPT (GUID Partition Table) documentation   Lukasz Majewski
      • [U-Boot] [PATCH 3/6] gpt: Replacement of GPT structures members with ones indicating endianness and size   Lukasz Majewski
      • [U-Boot] [PATCH 4/6] gpt: Support for GPT (GUID Partition Table) restoration   Lukasz Majewski
      • [U-Boot] [PATCH 5/6] gpt: Support for new "gpt" command   Lukasz Majewski
      • [U-Boot] [PATCH 6/6] gpt: Enable support for GPT partition table restoration at Samsung's Trats   Lukasz Majewski
      • [U-Boot] gpt: GUID/UUID - GPT restoration - open questions   Lukasz Majewski
      • [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>   Lukasz Majewski
      • [U-Boot] [PATCH 1/2] dfu:usb: Support for ext4   Lukasz Majewski
      • [U-Boot] [PATCH 1/2] dfu:usb: Support for ext4   Marek Vasut
      • [U-Boot] [PATCH 2/2] dfu:usb:fix: Read the "filesize" environment variable only when file read   Lukasz Majewski
      • [U-Boot] [PATCH 2/2] dfu:usb:fix: Read the "filesize" environment variable only when file read   Marek Vasut
      • [U-Boot] [PATCH v4 0/7] env: handle special variables and selective env default   Gerlando Falauto
      • [U-Boot] [PATCH v4 1/7] env: cosmetic: drop assignment i = iomux_doenv()   Gerlando Falauto
      • [U-Boot] [PATCH v4 1/7] env: cosmetic: drop assignment i = iomux_doenv()   Marek Vasut
      • [U-Boot] [PATCH v4 2/7] env: unify logic to check and apply changes   Gerlando Falauto
      • [U-Boot] [PATCH v4 2/7] env: unify logic to check and apply changes   Marek Vasut
      • [U-Boot] [PATCH v4 3/7] env: make himport_r() selective on variables   Gerlando Falauto
      • [U-Boot] [PATCH v4 3/7] env: make himport_r() selective on variables   Marek Vasut
      • [U-Boot] [PATCH v4 4/7] env: add check/apply logic to himport_r()   Gerlando Falauto
      • [U-Boot] [PATCH v4 4/7] env: add check/apply logic to himport_r()   Marek Vasut
      • [U-Boot] [PATCH v4 5/7] env: check and apply changes on delete/destroy   Gerlando Falauto
      • [U-Boot] [PATCH v4 5/7] env: check and apply changes on delete/destroy   Marek Vasut
      • [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply   Gerlando Falauto
      • [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply   Marek Vasut
      • [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply   Gerlando Falauto
      • [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply   Marek Vasut
      • [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply   Gerlando Falauto
      • [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply   Marek Vasut
      • [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env   Gerlando Falauto
      • [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env   Marek Vasut
      • [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env   Gerlando Falauto
      • [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env   Marek Vasut
      • [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env   Gerlando Falauto
      • [U-Boot] [PATCH v5 7/7] env: delete selected vars not present in imported env   Gerlando Falauto
      • [U-Boot] [PATCH v5 7/7] env: delete selected vars not present in imported env   Marek Vasut
• [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686   Rajeshwari Birje
  • [U-Boot] [PATCH 0/2 V3] EXYNOS5: Add MAX77686 support   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/2 V3] PMIC: MAX77686: Add support for MAX77686   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/2 V3] SMDK5250: Config: Enable MAX77686 pmic chip   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/2 V3] SMDK5250: Config: Enable MAX77686 pmic chip   Minkyu Kang
• [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Stefano Babic
  • [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Matt Sealey
    • [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Marek Vasut
      • [U-Boot] [PATCH] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Matt Sealey
• [U-Boot] Blackfin BF54x Silicon revision 0.4 and uClinux   Dimitar Penev
  • [U-Boot] Blackfin BF54x Silicon revision 0.4 and uClinux   Mike Frysinger
    • [U-Boot] Blackfin BF54x Silicon revision 0.4 and uClinux   Dimitar Penev
      • [U-Boot] [PATCH v2] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Matt Sealey
      • [U-Boot] [PATCH v2] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot   Stefano Babic
      • [U-Boot] [PATCH 0/2] Add gio api support to mx27   Philippe Reynes
      • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v3)   Philippe Reynes
      • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v3)   Stefano Babic
      • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v3)   Philippe Reynes
      • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v3)   Philippe Reynes
    • [U-Boot] Please pull u-boot-ti/master   Tom Rini
      • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
      • [U-Boot] [PATCH v4 0/20] ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
      • [U-Boot] [PATCH v4 01/20] Makefile: Move SPL files to clobber, remove from clean   Tom Rini
      • [U-Boot] [PATCH v4 02/20] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Tom Rini
      • [U-Boot] [PATCH v4 03/20] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()   Tom Rini
      • [U-Boot] [PATCH v4 04/20] omap-common: Fix typo in save_boot_params() in lowlevel_init.S   Tom Rini
      • [U-Boot] [PATCH v4 05/20] ARM: SPL: Rename omap_boot_device to spl_boot_device   Tom Rini
      • [U-Boot] [PATCH v4 06/20] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()   Tom Rini
      • [U-Boot] [PATCH v4 07/20] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Tom Rini
      • [U-Boot] [PATCH v4 08/20] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
      • [U-Boot] [PATCH v4 09/20] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>   Tom Rini
      • [U-Boot] [PATCH v4 10/20] ARM: SPL: Make spl_mmc.c more generic   Tom Rini
      • [U-Boot] [PATCH v4 11/20] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
      • [U-Boot] [PATCH v4 11/20] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Sughosh Ganu
      • [U-Boot] [PATCH v4 11/20] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
      • [U-Boot] [PATCH v4 12/20] ARM: SPL: Start hooking in the current SPI SPL support   Tom Rini
      • [U-Boot] [PATCH v4 13/20] ARM: SPL: Move gpmc_init() to spl_board_init()   Tom Rini
      • [U-Boot] [PATCH v4 14/20] SPL: Move the omap SPL framework to common/spl   Tom Rini
      • [U-Boot] [PATCH v4 15/20] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux   Tom Rini
      • [U-Boot] [PATCH v4 16/20] SPL: do not use fix value for u-boot size   Tom Rini
      • [U-Boot] [PATCH v4 16/20] SPL: do not use fix value for u-boot size   Sughosh Ganu
      • [U-Boot] [PATCH v4 16/20] SPL: do not use fix value for u-boot size   Tom Rini
      • [U-Boot] [PATCH v4 17/20] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
      • [U-Boot] [PATCH v4 18/20] da850: Add README.da850   Tom Rini
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Tom Rini
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Scott Wood
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Tom Rini
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Scott Wood
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Tom Rini
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Scott Wood
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Tom Rini
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Scott Wood
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Tom Rini
      • [U-Boot] [PATCH v4 19/20] SPL: NAND: Enhance drivers/mtd/nand/nand_spl_simple.c   Tom Rini
      • [U-Boot] [PATCH v4 20/20] SPL: SPI: Enhance spi_spl_load to match the other load functions   Tom Rini
      • [U-Boot] [PATCH v4 0/20] ARM: SPL: Make more generic, merge DaVinci and OMAP   Sughosh Ganu
• [U-Boot] Intermediate ARM status   Albert ARIBAUD
  • [U-Boot] [PATCH 0/2] Add gio api support to mx27 (v4)   Philippe Reynes
  • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v4)   Philippe Reynes
  • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v4)   Stefano Babic
  • [U-Boot] [PATCH 1/2] gpio: add gpio api support to mx27 (v4)   Stefano Babic
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v4)   Philippe Reynes
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v4)   Stefano Babic
  • [U-Boot] [PATCH 2/2] imx27lite: update with gpio api change (v4)   Stefano Babic
• [U-Boot] Intermediate ARM status   Albert ARIBAUD
  • [U-Boot] Intermediate ARM status   Marek Vasut
    • [U-Boot] [PATCH 1/2] FEC: Do not pass unaligned buffer to network stack   Marek Vasut
    • [U-Boot] [PATCH 2/2] FEC: Properly align address over the buffers for cache ops   Marek Vasut
    • [U-Boot] [PATCH 1/2] FEC: Do not pass unaligned buffer to network stack   Fabio Estevam
    • [U-Boot] [PATCH 1/4] COMMON: Implement common bounce buffer   Marek Vasut
    • [U-Boot] [PATCH 3/4] MMC: MXS: Toggle the generic bounce buffer on the boards   Marek Vasut
    • [U-Boot] [PATCH 4/4] MMC: Remove the MMC bounce buffer   Marek Vasut
    • [U-Boot] [PATCH 2/4] MMC: MXS: Convert MXS MMC driver to generic bounce buffer   Marek Vasut
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
  • [U-Boot] [PATCH] arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT   Bo Shen
  • [U-Boot] [PATCH v2 0/12] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH v2 01/12] SPL: Fix build problems on ARM with new SPL framework   Stefan Roese
  • [U-Boot] [PATCH v2 01/12] SPL: Fix build problems on ARM with new SPL framework   Tom Rini
  • [U-Boot] [PATCH v2 02/12] SPL: Use image_get_xxx() functions to access header values   Stefan Roese
  • [U-Boot] [PATCH v2 02/12] SPL: Use image_get_xxx() functions to access header values   Tom Rini
  • [U-Boot] [PATCH v2 03/12] SPL: Add option to skip copying of the mkimage header   Stefan Roese
  • [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support   Stefan Roese
  • [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support   Tom Rini
  • [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support   Tom Rini
  • [U-Boot] [PATCH v2 04/12] SPL: Add NOR flash booting support   Stefan Roese
  • [U-Boot] [PATCH v2 05/12] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
  • [U-Boot] [PATCH v2 06/12] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH v2 06/12] SPL: Port SPL framework to powerpc   Tom Rini
  • [U-Boot] [PATCH v2 06/12] SPL: Port SPL framework to powerpc   Stefan Roese
  • [U-Boot] [PATCH v2 07/12] env: Extract getenv_f() into separate source file   Stefan Roese
  • [U-Boot] [PATCH v2 08/12] mpc5200: Add SPL support   Stefan Roese
  • [U-Boot] [PATCH v2 09/12] mpc5200: Add a3m071 board support   Stefan Roese
  • [U-Boot] [PATCH v2 10/12] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"   Stefan Roese
  • [U-Boot] [PATCH v2 11/12] Makefile: Add possibility to set entry-point for u-boot.img   Stefan Roese
  • [U-Boot] [PATCH v2 12/12] Makefile: Add target for combined spl/u-boot.bin & u-boot.img   Stefan Roese
  • [U-Boot] [PATCH] OMAP3: add definition of CTRL_WKUP_CTRL register   Arnout Vandecappelle (Essensium/Mind)
  • [U-Boot] [PATCH 1/1] [RFC] DM: early_malloc for DM added.   Tomas Hlavacek
  • [U-Boot] [PATCH 1/1] [RFC] DM: early_malloc for DM added.   Marek Vasut
  • [U-Boot] [PATCH 1/1] [RFC] DM: early_malloc for DM added.   Tomas Hlavacek
  • [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.   Tomas Hlavacek
  • [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.   Graeme Russ
  • [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.   Graeme Russ
  • [U-Boot] [PATCHv2 1/1] [RFC] DM: early_malloc for DM added.   Graeme Russ
  • [U-Boot] [RFC] atmel:dataflash: remove unused mmc_mux   Andreas Bießmann
  • [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support   Zhizhou Zhang
  • [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus   Zhizhou Zhang
  • [U-Boot] [Patch V4 3/4] MIPS: add board qemu-mips64 support   Zhizhou Zhang
  • [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support   Zhizhou Zhang
  • [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support   Zhizhou Zhang
  • [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus   Zhizhou Zhang
  • [U-Boot] [Patch V4 2/4] MIPS: change related header files   Zhizhou Zhang
  • [U-Boot] [Patch V4 3/4] MIPS: add board qemu-mips64 support   Zhizhou Zhang
  • [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support   Zhizhou Zhang
  • [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support   Daniel Schwierzeck
  • [U-Boot] [Patch V4 2/4] MIPS: change related header files   Zhizhou Zhang
  • [U-Boot] [PATCH] ppc4xx: Canyonlands/Glacier: Squeeze NAND image a bit to fit again   Stefan Roese
  • [U-Boot] Proposed patch: ubifs_finddir shall free memory when dir found   Dev Ma
    • [U-Boot] Proposed patch: ubifs_finddir shall free memory when dir found   Stefan Roese
    • [U-Boot] Proposed patch: ubifs_finddir shall free memory when dir found   Dev Ma
  • [PATCH v2] mx5:Use IMX_GPIO_NR macro   Ashok Kumar Reddy
• [U-Boot] [PATCH v2] mx5:Use IMX_GPIO_NR macro   Ashok
  • [U-Boot] [PATCH v2] mx5:Use IMX_GPIO_NR macro   Stefano Babic
    • [U-Boot] [PATCH] hawkboard: Update config file to work with common spl framework   Sughosh Ganu
    • [U-Boot] [PATCH] hawkboard: Update config file to work with common spl framework   Tom Rini
• [U-Boot] [PATCH 1/2 v2] net: punt bd->bi_ip_addr   Anatolij Gustschin
  • [U-Boot] [PATCH v5 0/25] ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
  • [U-Boot] [PATCH v5 01/25] Makefile: Move SPL files to clobber, remove from clean   Tom Rini
  • [U-Boot] [PATCH v5 02/25] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Tom Rini
  • [U-Boot] [PATCH v5 03/25] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()   Tom Rini
  • [U-Boot] [PATCH v5 04/25] omap-common: Fix typo in save_boot_params() in lowlevel_init.S   Tom Rini
  • [U-Boot] [PATCH v5 05/25] ARM: SPL: Rename omap_boot_device to spl_boot_device   Tom Rini
  • [U-Boot] [PATCH v5 06/25] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()   Tom Rini
  • [U-Boot] [PATCH v5 07/25] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Tom Rini
  • [U-Boot] [PATCH v5 08/25] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
  • [U-Boot] [PATCH v5 09/25] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>   Tom Rini
  • [U-Boot] [PATCH v5 10/25] ARM: SPL: Make spl_mmc.c more generic   Tom Rini
  • [U-Boot] [PATCH v5 11/25] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
  • [U-Boot] [PATCH v5 12/25] ARM: SPL: Start hooking in the current SPI SPL support   Tom Rini
  • [U-Boot] [PATCH v5 13/25] ARM: SPL: Move gpmc_init() to spl_board_init()   Tom Rini
  • [U-Boot] [PATCH v5 14/25] SPL: Move the omap SPL framework to common/spl   Tom Rini
  • [U-Boot] [PATCH v5 15/25] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux   Tom Rini
  • [U-Boot] [PATCH v5 16/25] SPL: do not use fix value for u-boot size   Tom Rini
  • [U-Boot] [PATCH v5 17/25] SPL: Use image_get_xxx() functions to access header values   Tom Rini
  • [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl   Tom Rini
  • [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl   Scott Wood
  • [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl   Tom Rini
  • [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl   Scott Wood
  • [U-Boot] [PATCH v5 18/25] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl   Tom Rini
  • [U-Boot] [PATCH v5 19/25] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
  • [U-Boot] [PATCH v5 20/25] da850: Add README.da850   Tom Rini
  • [U-Boot] [PATCH v5 20/25] da850: Add README.da850   Christian Riesch
  • [U-Boot] [PATCH v5 20/25] da850: Add README.da850   Christian Riesch
  • [U-Boot] [PATCH v5 20/25] da850: Add README.da850   Tom Rini
  • [U-Boot] [PATCH v5 20/25] da850: Add README.da850   Prabhakar Lad
  • [U-Boot] [PATCH v5 21/25] SPL: Add NOR flash booting support   Tom Rini
  • [U-Boot] [PATCH v5 22/25] SPL: Add option to skip copying of the mkimage header   Tom Rini
  • [U-Boot] [PATCH v5 23/25] SPL: SPI: Enhance spi_spl_load to match the other load functions   Tom Rini
  • [U-Boot] [PATCH v5 24/25] SPL: Make un-supported boot device puts a debug instead   Tom Rini
  • [U-Boot] [PATCH v5 25/25] SPL: Rework how we inform about un-headered images   Tom Rini
  • [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock   Otavio Salvador
  • [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock   Marek Vasut
  • [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock   Otavio Salvador
  • [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property   Kim Phillips
  • [U-Boot] [PATCH 2/2] libfdt: Add helpers for 64-bit integer properties   Kim Phillips
  • [PATCH v3] mx5:Use IMX_GPIO_NR macro   Ashok Kumar Reddy
• [U-Boot] [PATCH v3] mx5:Use IMX_GPIO_NR macro   Ashok
  • [U-Boot] [PATCH v3] mx5:Use IMX_GPIO_NR macro   Stefano Babic
• [U-Boot] Request pull: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] How to read content of eeprom from uboot   Fierce
  • [U-Boot] U-Boot Api Problem   Priebe, Sebastian
    • [U-Boot] [PATCH v1 1/8] OMAP3: tam3517: add function to read MAC from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v1 3/8] OMAP3: mt_ventoux: Correct board pinmux   Stefano Babic
    • [U-Boot] [PATCH v1 4/8] OMAP3: mt_ventoux: activate GPIO4   Stefano Babic
    • [U-Boot] [PATCH v1 5/8] OMAP3: mt_ventoux: read MAC address from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v1 6/8] OMAP3: mt_ventoux: disable the buzzer at start-up   Stefano Babic
    • [U-Boot] [PATCH v1 7/8] video: drop duplicate set of DISPC_CONFIG register   Stefano Babic
    • [U-Boot] [PATCH v1 7/8] video: drop duplicate set of DISPC_CONFIG register   Jeroen Hofstee
    • [U-Boot] [PATCH v1 7/8] video: drop duplicate set of DISPC_CONFIG register   Stefano Babic
    • [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support   Stefano Babic
    • [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support   Heiko Schocher
    • [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support   Stefano Babic
    • [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support   Jeroen Hofstee
    • [U-Boot] [PATCH v1 8/8] OMAP3: mt_ventoux: added video support   Stefano Babic
    • [U-Boot] [PATCH v2 0/9] This patchset updates boards based on the TAM3517 SOM.   Stefano Babic
    • [U-Boot] [PATCH v2 1/9] OMAP3: tam3517: add function to read MAC from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v2 2/9] OMAP3: twister : get MAC address from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v2 3/9] OMAP3: mt_ventoux: Correct board pinmux   Stefano Babic
    • [U-Boot] [PATCH v2 4/9] OMAP3: mt_ventoux: activate GPIO4   Stefano Babic
    • [U-Boot] [PATCH v2 5/9] OMAP3: mt_ventoux: read MAC address from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v2 6/9] OMAP3: mt_ventoux: disable the buzzer at start-up   Stefano Babic
    • [U-Boot] [PATCH v2 7/9] video: drop duplicate set of DISPC_CONFIG register   Stefano Babic
    • [U-Boot] [PATCH v2 7/9] video: drop duplicate set of DISPC_CONFIG register   Jeroen Hofstee
    • [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters   Stefano Babic
    • [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters   Heiko Schocher
    • [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters   Jeroen Hofstee
    • [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters   Tom Rini
    • [U-Boot] [PATCH v2 8/9] OMAP3: video: add macros to set display parameters   Stefano Babic
    • [U-Boot] [PATCH v2 9/9] OMAP3: mt_ventoux: added video support   Stefano Babic
    • [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.   Stefano Babic
    • [U-Boot] [PATCH v3 1/9] OMAP3: tam3517: add function to read MAC from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v3 2/9] OMAP3: twister : get MAC address from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v3 3/9] OMAP3: mt_ventoux: Correct board pinmux   Stefano Babic
    • [U-Boot] [PATCH v3 4/9] OMAP3: mt_ventoux: activate GPIO4   Stefano Babic
    • [U-Boot] [PATCH v3 5/9] OMAP3: mt_ventoux: read MAC address from EEPROM   Stefano Babic
    • [U-Boot] [PATCH v3 6/9] OMAP3: mt_ventoux: disable the buzzer at start-up   Stefano Babic
    • [U-Boot] [PATCH v3 7/9] video: drop duplicate set of DISPC_CONFIG register   Stefano Babic
    • [U-Boot] [PATCH v3 8/9] OMAP3: video: add macros to set display parameters   Stefano Babic
    • [U-Boot] [PATCH v3 9/9] OMAP3: mt_ventoux: added video support   Stefano Babic
    • [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.   Tom Rini
    • [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.   Tom Rini
    • [U-Boot] [PATCH v1 2/8] OMAP3: twister : get MAC address from EEPROM   Stefano Babic
    • [U-Boot] [PATCH 0/2] i2c:soft:multi: Support for multiple soft I2C buses at TRATS   Lukasz Majewski
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Lukasz Majewski
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Heiko Schocher
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Lukasz Majewski
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Heiko Schocher
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Lukasz Majewski
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Heiko Schocher
    • [U-Boot] [PATCH 1/2] i2c:soft:multi: Support for multiple soft I2C buses   Lukasz Majewski
    • [U-Boot] [PATCH 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board   Lukasz Majewski
    • [U-Boot] [PATCH v2 0/2] i2c:soft:multi: Support for multiple soft I2C buses at TRATS   Lukasz Majewski
    • [U-Boot] [PATCH v2 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards   Lukasz Majewski
    • [U-Boot] [PATCH v2 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board   Lukasz Majewski
    • [U-Boot] [PATCH] SPL: Enable use of custom defined U-Boot entry point   Stefan Roese
    • [U-Boot] [PATCH] SPL: Enable use of custom defined U-Boot entry point   Tom Rini
    • [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed   Otavio Salvador
    • [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed   Marek Vasut
    • [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed   Otavio Salvador
    • [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed   Marek Vasut
    • [U-Boot] [PATCH v2 2/2] MX28: mx28evk: Enable SPI DMA   Otavio Salvador
    • [U-Boot] [PATCH 1/4] EXYNOS: change the compile/clean option of spl   snow.jhkim at gmail.com
    • [U-Boot] [PATCH 2/4] EXYNOS: add XXTI for clock source   snow.jhkim at gmail.com
    • [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support   snow.jhkim at gmail.com
    • [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support   Kyungmin Park
    • [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support   Minkyu Kang
    • [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support   snow.jhkim at gmail.com
    • [U-Boot] [PATCH 4/4] EXYNOS: Add support for Insignal Origen QUAD board   snow.jhkim at gmail.com
    • [U-Boot] [PATCH 4/4] EXYNOS: Add support for Insignal Origen QUAD board   snow.jhkim at gmail.com
    • [U-Boot] [PATCH] ubifs: Fix memory leak in ubifs_finddir   Stefan Roese
    • [U-Boot] [PATCH] MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR   Stefano Babic
    • [U-Boot] [PATCH] MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR   Matt Sealey
    • [U-Boot] [PATCH] MAKEALL: update to work with new boards.cfg syntax   Allen Martin
    • [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()   Fabio Estevam
    • [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()   Marek Vasut
    • [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()   Marek Vasut
    • [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()   Otavio Salvador
    • [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL   Allen Martin
    • [U-Boot] [PATCH v10 01/16] tegra20: rename tegra2 -> tegra20   Allen Martin
    • [U-Boot] [PATCH v10 05/16] tegra20: make board mkdir commands unconditional   Allen Martin
    • [U-Boot] [PATCH v10 07/16] MAKEALL: update to work with new boards.cfg syntax   Allen Martin
    • [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end   Matej Frančeškin
    • [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end   Marek Vasut
    • [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end   Matej Frančeškin
    • [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end   Tom Rini
    • [U-Boot] [PATCH] MUSB driver: Timeout is never detected as the while loop does not end   Marek Vasut
    • [U-Boot] [PATCH v10 08/16] ARM: Fix arm720t SPL build   Allen Martin
    • [U-Boot] [PATCH v10 10/16] ARM: add tegra20 support to arm720t   Allen Martin
    • [U-Boot] [PATCH v10 12/16] tegra20: move SDRAM param save to later in boot   Allen Martin
    • [U-Boot] [PATCH v10 13/16] tegra20: enable SPL for tegra20 boards   Allen Martin
    • [U-Boot] [PATCH v10 14/16] arm: enable libgcc build for SPL   Allen Martin
    • [U-Boot] [PATCH v10 15/16] spl: fix SPL build of private libgcc   Allen Martin
    • [U-Boot] [PATCH v10 16/16] tegra20: Remove armv4t build flags   Allen Martin
    • [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL   Tom Warren
    • [U-Boot] ./MAKEALL arm is buggy   Allen Martin
    • [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL   Lucas Stach
    • [U-Boot] [PATCH v10 02/16] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
    • [U-Boot] [PATCH v10 03/16] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
    • [U-Boot] [PATCH v10 04/16] tegra20: tec: add tegra20-common-post.h   Allen Martin
    • [U-Boot] [PATCH v10 06/16] mkconfig: remove bashisms and cleanup config.mk generation   Allen Martin
    • [U-Boot] [PATCH v10 09/16] tegra20: remove timer_init from SPL build   Allen Martin
    • [U-Boot] [PATCH v10 11/16] tegra20: add u-boot-*-tegra.bin targets   Allen Martin
    • [U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts   Marek Vasut
    • [U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts   Stefano Babic
    • [U-Boot] [PATCH] SF: Add Spansion S25FL064P IDs   Marek Vasut
    • [U-Boot] [PATCH 1/2] MX28: Add CONFIG_MX28_DEBUG   Marek Vasut
    • [U-Boot] [PATCH 1/2] MX28: Add CONFIG_MX28_DEBUG   Stefano Babic
    • [U-Boot] [PATCH 1/2] MX28: Add CONFIG_MX28_DEBUG   Marek Vasut
    • [U-Boot] [PATCH 2/2] MX28: Add LRADC dump into SPL debug   Marek Vasut
    • [U-Boot] [PATCH 1/2] MX28: Cleanup mxsboot within make mrproper   Marek Vasut
    • [U-Boot] [PATCH 2/2] MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS   Marek Vasut
    • [U-Boot] [PATCH 2/2] MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS   Stefano Babic
    • [U-Boot] [PATCH 1/2] MX28: Cleanup mxsboot within make mrproper   Stefano Babic
• [U-Boot] patman doesn't send patches   Stefan Roese
  • [U-Boot] patman doesn't send patches   Ilya Yanok
    • [U-Boot] patman doesn't send patches   Simon Glass
    • [U-Boot] [PATCH] implement software SPI   Piotr Wilczek
    • [U-Boot] [PATCH] arm:exynos4:universal_c210: implement software SPI   Piotr Wilczek
• [U-Boot] Specifying flash page sizes   Ellis Andrew
• [U-Boot] dreamplug spi partitions   Ian Campbell
  • [U-Boot] [PATCH 1/3] FEC: Remove endless loop in the FEC driver   Marek Vasut
  • [U-Boot] [PATCH 3/3] FEC: Replace magic contants   Marek Vasut
  • [U-Boot] [PATCH 2/3] FEC: Rework the TX wait mechanism   Marek Vasut
  • [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Marek Vasut
• [U-Boot] [BUG] disk drivers do not free private memory   Pavel Herrmann
• [U-Boot] Changes for u-boot-ti/master   Tom Rini
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Marek Vasut
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Marek Vasut
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Marek Vasut
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Marek Vasut
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Marek Vasut
  • [U-Boot] [PATCH] Loop block device for sandbox   Pavel Herrmann
  • [U-Boot] [PATCH] Loop block device for sandbox   Marek Vasut
  • [U-Boot] [PATCH] mx28evk: Add USB Ethernet support   Fabio Estevam
  • [U-Boot] [PATCH] mx28evk: Add USB Ethernet support   Marek Vasut
  • [U-Boot] [PATCH] MAKEALL: fix ARM board lists   Allen Martin
  • [U-Boot] [PATCH] MAKEALL: fix ARM board lists   Tom Rini
  • [U-Boot] [PATCH] MAKEALL: fix ARM board lists   Allen Martin
  • [U-Boot] [PATCH] MAKEALL: fix ARM board lists   Allen Martin
  • [U-Boot] [PATCH] MX28: SPI: Fix CTRL0 not being written at end of DMA transfer   Marek Vasut
  • [U-Boot] [PATCH v2] MAKEALL: fix per arch board lists   Allen Martin
  • [U-Boot] [PATCH v2] MAKEALL: fix per arch board lists   Tom Rini
  • [U-Boot] [PATCH v2 0/5] pci: light update work on common pci code   Andrew Sharp
  • [U-Boot] [PATCH v2 1/5] pci: fix errant data types and corresponding access functions   Andrew Sharp
  • [U-Boot] [PATCH v2 2/5] [cosmetic] pci: clean up some whitespace and formatting   Andrew Sharp
  • [U-Boot] [PATCH v2 3/5] pci: minor cleanup of CONFIG_PCI_PNP usage   Andrew Sharp
  • [U-Boot] [PATCH v2 4/5] pci: update pci_ids.h with a few new entries   Andrew Sharp
  • [U-Boot] [PATCH v2 5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done   Andrew Sharp
• [U-Boot] Problems with a P2020 board   Mark Marshall
  • [U-Boot] Problems with a P2020 board   Joakim Tjernlund
  • [U-Boot] Problems with a P2020 board   Stefan Roese
• [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL   Albert ARIBAUD
  • [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL   Tom Warren
  • [U-Boot] [PATCH v10 00/16] split tegra20 arm7 code into separate SPL   Allen Martin
• [U-Boot] OMAP Reset fails when kernel governor 'ondemand' is active   Andreas Müller
  • [U-Boot] [PATCH] usb: ehci: don't print debug output   Lucas Stach
  • [U-Boot] [PATCH] usb: ehci: don't print debug output   Marek Vasut
  • [U-Boot] [PATCH] usb: remove unnecessary packed attributes   Lucas Stach
  • [U-Boot] [PATCH] usb: remove unnecessary packed attributes   Marek Vasut
  • [U-Boot] [PATCH] usb: remove unnecessary packed attributes   Marek Vasut
  • [U-Boot] [PATCH] usb: remove unnecessary packed attributes   Lucas Stach
  • [U-Boot] [PATCH] usb: remove unnecessary packed attributes   Marek Vasut
• [U-Boot] trouble with mmc on origen   John Rigby
  • [U-Boot] trouble with mmc on origen   Jaehoon Chung
    • [U-Boot] [PATCH 0/4] USB multi controller   Lucas Stach
    • [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface   Lucas Stach
    • [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface   Marek Vasut
    • [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface   Lucas Stach
    • [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface   Marek Vasut
    • [U-Boot] [PATCH 3/4] tegra20: port to new ehci interface   Lucas Stach
    • [U-Boot] [PATCH 4/4] usb: add support for multiple usb controllers   Lucas Stach
    • [U-Boot] [PATCH 4/4] usb: add support for multiple usb controllers   Marek Vasut
    • [U-Boot] [PATCH 1/4] usb: lowlevel interface change to support multiple controllers   Lucas Stach
    • [U-Boot] [PATCH 1/4] usb: lowlevel interface change to support multiple controllers   Marek Vasut
• [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Andy Fleming
• [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller   Andy Fleming
  • [U-Boot] [PATCH 2/4] EXYNOS: clock: add the get_mmc_clk function   Andy Fleming
• [U-Boot] [PATCH v2 3/4] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Andy Fleming
  • [U-Boot] [PATCH v2 2/4] mmc: s5p_mmc: fixed wrong function argument   Andy Fleming
    • [U-Boot] [PATCH v2 2/4] mmc: s5p_mmc: fixed wrong function argument   Jaehoon Chung
  • [U-Boot] [PATCH v2 4/4] mmc: sdhci: add the udelay for completed post-request   Andy Fleming
    • [U-Boot] [PATCH] usb: do explicit unaligned accesses   Lucas Stach
    • [U-Boot] [PATCH] usb: do explicit unaligned accesses   Marek Vasut
    • [U-Boot] [PATCH] usb: do explicit unaligned accesses   Albert ARIBAUD
    • [U-Boot] [PATCH] usb: do explicit unaligned accesses   Marek Vasut
    • [U-Boot] [PATCH] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver   Marek Vasut
    • [U-Boot] [PATCH] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver   Marek Vasut
    • [U-Boot] [PATCH] SCSPS1: Enable caches   Marek Vasut
• [U-Boot] [PATCH v3 0/4] mmc: sdhci: fixed some problems for Exynos   Jaehoon Chung
• [U-Boot] [PATCH v3 1/4] mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B   Jaehoon Chung
• [U-Boot] [PATCH v3 2/4] mmc: s5p_sdhci: fixed wrong function argument   Jaehoon Chung
• [U-Boot] [PATCH v3 3/4] mmc: s5p_sdhci: add the set_mmc_clk for cmu control   Jaehoon Chung
• [U-Boot] [PATCH v3 4/4] mmc: sdhci: increase the timeout and udelay value   Jaehoon Chung
  • [U-Boot] [PATCH v3 4/4] mmc: sdhci: increase the timeout and udelay value   Andy Fleming
• [U-Boot] [PATCH v3 3/4] mmc: s5p_sdhci: add the set_mmc_clk for cmu control   Jaehoon Chung
• [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
  • [U-Boot] [PATCH] Origen: Add default clock settings for multimedia IPs   Tushar Behera
  • [U-Boot] Where to find usable CROSS_COMPILE toolchain and the particular config?   JIA Pei
    • [U-Boot] Where to find usable CROSS_COMPILE toolchain and the particular config?   Albert ARIBAUD
• [U-Boot] [PATCH] usb: do explicit unaligned accesses   Lucas Stach
  • [U-Boot] [PATCH v2] usb: do explicit unaligned accesses   Lucas Stach
  • [U-Boot] [PATCH] devkit8000: add rootwait to mmcboot option   Andreas Bießmann
• [U-Boot] Memtest end address   José Miguel Gonçalves
• [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/   Albert ARIBAUD
  • [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/   Tom Rini
  • [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/   Marek Vasut
  • [U-Boot] [PATCH v6 0/29] ARM: SPL: Make more generic, merge DaVinci and OMAP   Tom Rini
  • [U-Boot] [PATCH v6 01/29] Makefile: Move SPL files to clobber, remove from clean   Tom Rini
  • [U-Boot] [PATCH v6 02/29] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT   Tom Rini
  • [U-Boot] [PATCH v6 03/29] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()   Tom Rini
  • [U-Boot] [PATCH v6 04/29] omap-common: Fix typo in save_boot_params() in lowlevel_init.S   Tom Rini
  • [U-Boot] [PATCH v6 05/29] omap-common: SPL: Fix whitespace in omap-common/u-boot-spl.lds.   Tom Rini
  • [U-Boot] [PATCH v6 06/29] ARM: SPL: Rename omap_boot_device to spl_boot_device   Tom Rini
  • [U-Boot] [PATCH v6 07/29] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()   Tom Rini
  • [U-Boot] [PATCH v6 08/29] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c   Tom Rini
  • [U-Boot] [PATCH v6 09/29] ARM: SPL: Only call mem_malloc_init if configured   Tom Rini
  • [U-Boot] [PATCH v6 10/29] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>   Tom Rini
  • [U-Boot] [PATCH v6 11/29] ARM: SPL: Make spl_mmc.c more generic   Tom Rini
  • [U-Boot] [PATCH v6 12/29] ARM: SPL: Clean up spl.c / spl_nand.c slightly   Tom Rini
  • [U-Boot] [PATCH v6 13/29] ARM: SPL: Start hooking in the current SPI SPL support   Tom Rini
  • [U-Boot] [PATCH v6 14/29] ARM: SPL: Move gpmc_init() to spl_board_init()   Tom Rini
  • [U-Boot] [PATCH v6 15/29] SPL: Move the omap SPL framework to common/spl   Tom Rini
  • [U-Boot] [PATCH v6 16/29] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux   Tom Rini
  • [U-Boot] [PATCH v6 17/29] SPL: do not use fix value for u-boot size   Tom Rini
  • [U-Boot] [PATCH v6 18/29] SPL: Use image_get_xxx() functions to access header values   Tom Rini
  • [U-Boot] [PATCH v6 19/29] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl   Tom Rini
  • [U-Boot] [PATCH v6 20/29] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK   Tom Rini
  • [U-Boot] [PATCH v6 21/29] hawkboard: Update config file to work with common spl framework   Tom Rini
  • [U-Boot] [PATCH v6 22/29] da850: Add README.da850   Tom Rini
  • [U-Boot] [PATCH v6 23/29] SPL: Add NOR flash booting support   Tom Rini
  • [U-Boot] [PATCH v6 24/29] SPL: Add option to skip copying of the mkimage header   Tom Rini
  • [U-Boot] [PATCH v6 25/29] SPL: SPI: Enhance spi_spl_load to match the other load functions   Tom Rini
  • [U-Boot] [PATCH v6 26/29] SPL: Enable use of custom defined U-Boot entry point   Tom Rini
  • [U-Boot] [PATCH v6 27/29] SPL: Make un-supported boot device puts a debug instead   Tom Rini
  • [U-Boot] [PATCH v6 28/29] SPL: Rework how we inform about un-headered images   Tom Rini
  • [U-Boot] [PATCH v6 29/29] SPL: Add support for loading image from ram in SPL.   Tom Rini
  • [U-Boot] [PATCH v11 00/16] split tegra20 arm7 code into separate SPL   Allen Martin
  • [U-Boot] [PATCH v11 01/16] tegra20: rename tegra2 -> tegra20   Allen Martin
  • [U-Boot] [PATCH v11 06/16] mkconfig: remove bashisms and cleanup config.mk generation   Allen Martin
  • [U-Boot] [PATCH v11 13/16] tegra20: enable SPL for tegra20 boards   Allen Martin
  • [U-Boot] [PATCH v11 16/16] tegra20: Remove armv4t build flags   Allen Martin
  • [U-Boot] [PATCH v11 02/16] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
  • [U-Boot] [PATCH v11 03/16] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
  • [U-Boot] [PATCH v11 04/16] tegra20: tec: add tegra20-common-post.h   Allen Martin
  • [U-Boot] [PATCH v11 05/16] tegra20: make board mkdir commands unconditional   Allen Martin
  • [U-Boot] [PATCH v11 07/16] MAKEALL: update to work with new boards.cfg syntax   Allen Martin
  • [U-Boot] [PATCH v11 08/16] ARM: Fix arm720t SPL build   Allen Martin
  • [U-Boot] [PATCH v11 09/16] tegra20: remove timer_init from SPL build   Allen Martin
  • [U-Boot] [PATCH v11 10/16] ARM: add tegra20 support to arm720t   Allen Martin
  • [U-Boot] [PATCH v11 11/16] tegra20: add u-boot-*-tegra.bin targets   Allen Martin
  • [U-Boot] [PATCH v11 12/16] tegra20: move SDRAM param save to later in boot   Allen Martin
  • [U-Boot] [PATCH v11 14/16] arm: enable libgcc build for SPL   Allen Martin
  • [U-Boot] [PATCH v11 15/16] spl: fix SPL build of private libgcc   Allen Martin
  • [U-Boot] [PATCH 1/5] powerpc/mpc85xx: fix Unicode characters in release.S   Timur Tabi
  • [U-Boot] [PATCH 2/5] powerpc/85xx: introduce SET_PCI_LIODN_BASE, for setting PCI LIODNs   Timur Tabi
  • [U-Boot] [PATCH 3/5] powerpc/85xx: move SRIO configuration out of corenet_ds.h   Timur Tabi
  • [U-Boot] [PATCH 4/5] powerpc/85xx: Add P5040 processor support   Timur Tabi
  • [U-Boot] [PATCH 5/5] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board   Timur Tabi
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini